Building The CHEAPEST 1000HP Corvette ZR1 On The Planet!
ฝัง
- เผยแพร่เมื่อ 26 พ.ย. 2024
- After buying the cheapest C6 Corvette ZR1 I could find at $47k with over 100,000 Miles on it, things predictably get ROUGH during my quest for 1000hp... In this video we face our biggest challenge yet when things go south with my brand new built LS9 engine!
My chase for an 8 second pass in a C6 ZR1 Vette might be over before it gets started but we have no choice but to figure out a way around it and cross our fingers!
Have a salvage Corvette rebuild story of your own? Maybe you're building your own 1000HP Z06 or ZR1? Put it in the comments!
Subscribe to my PERSONAL TH-cam Channel with tons of behind the scenes, bonus footage, car vlogs and more!
@LeeC
Collaboration/Sponsorship/Marketing/Questions - Lee@Leecparts.com
Check out the whole ScrapLife Family!
@scraplifedalt
@scraplifefernandoScrapLife in Spanish!
||| TAG ME IN CARS FOR SALE AND GET PAID!! |||
See a car for sale that you think we'd be interested in? Wrecked, Blown up, Abandoned Projects and well... anything interesting! Want to see it in a video? Tag me in (or send me) the listing! If you're the first to send it to us and we end up buying it, I'll send you $100!
Email - Lee@Leecparts.com
IG - @Leecparts @Scraplifegarage
FB - Scraplifegarage
TikTok - @Scraplifegarage
#CORVETTE #C6 #ZR1
Hey guys, quick tip. To prevent stuff you pressure wash off like after you degrease from corroding or to keep it clean even further, mist wax over it :) don’t have to buff and keeps a sealant over it. Can be a cheap wax, still works. Takes another 2 min to do overall lol
I’m a Ford guy but I love corvettes! This channel needs more views!
For sure
Fernando, grab the shaft! 😆😆😆 stick it in! 😆😆😆 I'm dying 😭 🤣
Beautiful finally seeing it come together 🔥
I feel your pain with the broken header bolt. I spent 12 hours getting 3 out of an LS head. Left hand drill bits helped, but ultimately I ended up finally getting them out with an extractor.
I remember when that happened to my engine swapped pagani huayra took a whole day to get out so I fell your pain
@@Kar333m yeah it was extremely frustrating. What started out as a simple header install turned into pulling the heads, replacing lifters, new pushrods and a trunion upgrade. Was one of those "well while I'm in there moments" haha
Can’t wait to hear this start.. 👍🏻😎
This is what car channels should be…..a real build. Not just easy mods.
I’m ready to make some power with that thing!!!
I HATE you for that exhaust
Fran I noticed he used the D port header gaskets. Shouldn’t those be round with the 2” headers? Hate to see something that cheap and easy get missed. 🤙🏽
Love watching your videos! You make me laugh so damn much ! And awesome builds! Keep up the good work!
I love that color, ‘Supersonic Blue Metallic’. I have a G35 in a very similar, ‘Lakeshore Slate Metallic’.
I don't have a c6 Zr1, but I do have a 09 bone stock c6 z06 with 58k miles. It's very interesting watching this.
This build is absolutely mind-blowing!
4:10 watching this knowing full well the video after next is titled "my cheap 1000hp zr1 build blew up in my face"
That looks like so much fun, I own a c6 corvette base model and only dream of doing this kinda stuff. Ill probably start doing it once I graduate college haha
stainless bolts are my least favorite thing, however ive learned that lubing them when stainless goes into stainless helps ten fold over the years, idk why but stainless gulls on threads and basically welds itself together, also when drilling stainless you need to pulse the drill, to keep the drill bit cool, or itll dull your bit almost instantly
Instead of bolts which pull and twist in the aluminum. Put studs in for the headers and use arp 12pt nuts . Saves what you did drilling a bolt out.
Minimal amount of rust to complain about. Enjoying the win for you putting your Chevrolet back together.
I've drilled out hundreds of broken bolts, just like that one. I feel your pain. Getting broken drill bits out is always a joy as well! Oh, & I hate Nissan Jukes.......
187k subs you guys are killing it!
Brilliant content .
Looking forward to hearing that engine fire up.
I absolutely love that color of that ZR1. 🤙
my favorite color
Very strange that the set of Frankenstein heads had the threads messed up like that. Maybe a quality check that wasn't done on those for some reason. Glad you were able to get it sorted out though. Looking forward to watching this Z get completed.
Awesome video guys. I was cracking up. Lifted me up today. Needed it!
I love watching your videos! So far it’s my favorite channel love your work and videos!
Always be sure to put the throttle body on the right way!
Lee, I love how you just roll with it! If that was me and that happened to my brand new heads I would have been rolling on the ground crying like a little bitch!!!! LOVED This video. Been waiting for so long.
Man the broken bolt brought back memories of when I put headers on my challenger 5.7 hemi, broke a bolt, then an extractor. Ended up replacing the head. No Bueno
1000hp C6 ZR1? Hopefully, you make closer to 1200whp on E85 with an LME LS9, worked heads, cam, Kong 2650, and supporting mods. I vote LS7 swapped Nissan Juke!!
This guy needs to do a collab with whistlindiesel, whistlindiesel destroys a car, he repairs it
Awesome work. I enjoy Nissan Dukes, they make a great trashbin
Neg in the weld.
Next time, try the drimmel slice,,& flat screw driver
Use left hand drill bits. They work awesome cus while drilling going backwards so tries to come out the whole time.
Learning about cars n their inner workings is kinda interesting tbh
Swap it into a juke just to mess with Dalt! 🤣🤣
Pull up next to a ZR1 on the bay bridge, step on the gas, and it passes you like your not accelerating, no big deal. Pull up next to a juke, it blows your doors off, you pull over and the rethink your entire life. That Juke is sick, you guys should change your channel name to "JukeLife"
“2 out of 3 upside down throttle bodies aint half bad” -Meatloaf
YES nice dude cant wait to see her altogether
Everything is so much easier to work on when it’s out of the car!
I like the Nissan Juke. Don’t love, but like. Certainly don’t hate!😎
I don’t think I’ve ever been this early to a video.
Can’t wait to watch
dawg i just got home from hobby lobby and my classes saw this was uploaded a minute ago, life is good
Yup. I got recommended a different video and wondered if he’d posted yet and it said it was posted 11 seconds ago lol
I really wanna see how you guys save the demon 😂
Saving it as I type this!
Yes. Yes. Yes.
Love your little comments. Granada the rear, not gm recommended. Etc. lol
You do awesome work!!!
Super excited for this build
You need to change those header gaskets. It looked like you used the D port gaskets and you should use the round gaskets. Just FYI..
Lol I’ve nailed those uppers CA 3-4 times in my career yet to dump those washers
Idk if anyone beat me to it, but 18:45 is the reshoot for sure
Best supercharger on the market, best bang for the buck.
Nissan juke, funniest car I’ve played with in years right next to a SUBARU BRAT, hahahaha!!!
I would have took a cutoff wheel and put a slot in that broken bolt. Use a good straight head screw driver on a 3/8 drive... super easy to remove then.
Bet it wouldn't have worked. We are talking about a set of $5000 heads, You think the threads were jus "an oversight"?
Awesome video dude. Appreciate the bad too. Happened to me on heads recently albeit cheaper ones.
Heads had nothing to do with it. Well in this case anyway, Idk about yours.
Y’all make it look so easy
Get some left hand drill bits for next time this happens. The broken stud will come out way sooner.
I’d be calling Frankenstein and getting a new head
Stainless bolts.... There's your hint.
There was no oversight from Frankenstein, this was an oversight by the user.
Look up galling, before passing judgement please know for fact.
That transmission tube looks like a throwback to the 1900. Wth
Step up to a timecert. Way thicker than a normal helicoil. You’ll have plenty of meat to get it back to the og headed bolt size
Matching bolt proponent here too lol! My OCD is strong.... Completely feel for you.
What’s least expensive to do, make 800whp by….
Twin Turbo a C8 Stingray
Or
Supercharge a C7 Z06
I can't wait for the next video...
Must be nice building a car in literally the most organized junkyard ever 😂
3:18 It's so sad to hear that the slave cylinder is completely depressed 😔 hope it's mental health gets better soon 🙏
Hammer a t20 in to the bolt and the put socket on a Rachet and slowly turn
Hello guys you are doing great job am watching from Kenya and I would like to volunteer to work for you guys if you may need one am here guys 🙂
Great job you one a few TH-camrs that did your own engine and put it all together and built to car yourself you see all these guys doing builds and it's not even them they're just driving the Lambo and Corvette
To be fair i didn’t build the ACTUAL engine, there’s a lot I can do, but there’s certainly some things I’m smart enough to let the pros handle!
@@scraplifegarage you know what I mean
The real issue with magnesium is it is highly explosive. I mean technically if it was to drag across the ground in a wreck I don't know why things aren't catching fire more often.
You’re right but it’s a magnesium alloy, not pure magnesium.
I love the torque specs used in the video 😂😂
I bet Daltons Juke is running in this video 😅! If you ever finish the ZR1 it will be bad ass.
Wire wheel on a drill should clean that rusty pully up nicely I would think?
I would of put a high torue mini starter on there with a thermal blanket, had to do it to mine due to higher comp pistons and lazy oem starter.
Fun video to watch!
Ughhh. Lol seeing the vettes in the auction. Someday someday.
I always run a tap into the hole and put antisieze on any bolt that is going into aluminum. just so the bolt does not sieze and do what happened to you. Especially stainless into aluminum .
Antisieze in LS header bolts will just have them come loose from vibration. Using a good quality bolt and cleaning the threads before hand goes a long way.
@@RoxxPC not with stainless, you NEED a lube. Not getting better quality than ARP, if it was Chinese stainless, this wouldn't have happened (that's not a good thing btw)
Never put it in dry! With stainless anyway 😂
oh yeah I have been there fighting those broken bolts it sucks
🤣🤣🤣 hate em? I despise those round alien headlight scrap piles 🤙🏼
keep up the good work o the vids!
I love Nissan jukes
اول متابع من عراق العضيم
FINALLY! Need less eye candy motor for sure😂
Boggles my mind how these cars get put back together
120,000 🥲 as my 11 gt 5.0 is getting modded and sent with 150,000 and my 250,000 mile truck is too 😂.
Hey trying to learn more about building high horsepower corvettes, is the upside down throttle body a HP hack? Does it make more tension in the butterfly or something? Definitely didnt know that trick thanks for the info!
Lmfao, I definitely hate Nissan Jukes! 🤣
Incase you forgot? I HATE NISSAN JUKES
Yay corvette 🎉
Is there a way to follow how many new subscribers a channel has "aquired" since a certain time period or is that "divulged" only the the channel owner(s)? I'm just curious, I don't want to manually write down the figure once a week or something similar to that. Cause I'm lazy... I kind of like this channel so I wish them success, that's it!
Didn't get the stripped bolt out, somone must hate Nissan Jukes
Remember this car love it. I’m still looking for headlights for black c6 if you have a pair great if not any ideas would love to here thanks
When can we hear that monsters first start up
So, how did you end up with such a cool job?
You guys should mid engine ls swap a fiesta.
Drilling out a jeep lug nuts and breaking drill bits inside is a normal part of owning a jeep...(its a jeep thing 🤪)....I feel your pain
Love my ford an mopar congrats brother
I love free stickers
I like Nissan Juke’s!!😂😂
Swap it into an S15 next year😏
NOW WE’RE TALKIN!
what a difference working on civic and working in Corvette
Juke a obomnation lol Zr1 love good to see 1 getting put back together
Swamp the engine into a geo metro and make it a rwd or awd.
I.♥️ Nissan Jukes
Love the content gents!! P.s. I hate Nissan Jukes.. like for real.