You have some great, low-cost ideas. Putting a piece of rubber under the finderscope bracket would save a lot of heartache at night when you bump it and the bracket slips, moving the reticle by 2 degrees! I used a red dot + RACI (I always say Rah-see, perhaps incorrectly?) for a while and then switched to using the RACI screws as a “gun sight” to make it simpler and lighter. Both of those solutions made me get off the stool and lean over the scope, or worse, get on my knees behind the scope. About a year ago I switched to a $15 laser strapped to the RACI with Velcro ties. It gets me within 5 degrees of the target and the RACI does the rest. Way better. I also often share a finderscope between scopes, to save a little money and have less junk to store. I flocked my AD10 years ago. I found a significant improvement, but did not have matching scopes to compare like you. I live in a Bortle 8 area, so it may well because of house location that I noticed an improvement. I did not have enough experience at the time to see if it was an improved the views at my Bortle 4 or 2 sites. Keep making videos!
The rubber anti-slide piece was out of necessity. I had a dovetail mount that easily got bumped with even the slightest push. I love the RACI viewfinders. I live within three miles of a large airport, so I can't use lasers unfortunately. I've heard good things about them (far from airports).
Hi. I designed this telescope for Orion back in the day. Interesting to see what mods you put on it. There is one piece of misinformation regarding "tube currents". The optical distortion of different temperature air is caused by the fact the air is at different temperatures, which causes it to have different indexes of refraction. The changing indexes of refraction is what changes the light path in the tube. In theory, if it was a hurricane inside the tube, but all the air was at exactly the same temperature, it would not distort the image. A minor point in what is otherwise excellent content. Glad folks are still using this scope.
I don't solder at all. I split the end of both wires into two parts. Then wrap one part of wire 1 with one part of wire 2. Then the other part of wire 1 withe the other part of wire 2. I bent the one wrap to wire one and the other wrap to wire two. Finally I shrink-wrap the connection. No solder, no special connectors, just shrink-wrap.
love your vids ! keep making them ! for future reference , if you run out of ideas , maybe you could find a way to put an eyepiece on a raci finder or a filter on it .
Thanks! For now I have a ton of videos planned out, but I will add that to the list. Unlike the "big guys", my production rate is a bit on the slow side, lol.
Ah the green font. There was an ebay sale for a telescope with four eyepieces with the green font in the photos (not mentioned in the description), two panoptics and two naglers, I was swimming.
I cant stand having only a right angle finder, it is so hard to aim the scope when you arent looking in the same direction you are aiming. I have really nice right angle polar finders on my vintage SCTs, that I wouldnt replace with cheaper modern straight finders, so the addition of a telrad really helps aim the scope. In fact, I generally didnt use optical finders that often anyway, before my storage was broken into, I used gem mounted C11 and only used a telrad, and an 8"ARC(acf) that i just used a basic red dot with. On my televue 101 I used a starbeam, and a basic red dot on my pronto via a vixen dovetail base on the clamshell. I miss those scopes. I didn't get a dime from insurance so I had to start over with the least expensive scopes possible and through a trade for the losmandy tripod, counterweights and hardware the theives didnt know to steal, i got an old 10" meade, and through another friend i got an old c8 for a steal of a price.
I know the feeling. I had my storage building burglarized many years ago. Fortunately, it started raining really hard while they were there so they only got "half" of the good stuff. Still very upsetting.
@Reflactor Just because sometimes things don't work as intended, is not a reason to be dissuaded from making your valuable videos. The person who never made a mistake never made anything. It is also much easier to criticise others than to attempt something difficult and awkward, especially when videoing it and publishing what went wrong. I am immensely impressed by some of the things you've achieved and I am fairly confident that had I attempted the same, it is likely that I would not have been successful.
For me, SVBony 6x30 RACI finder was a game changer. It shows so much more stars in light polluted area and unlike larger 50mm ones is gives very wide FOV of around 7.5° and is quite lightweight. It is especially useful for setting up go to system as it is very accurate and has wide FOV.
I run the cooling fan with 3 18650 Lithium batteries. Amazon sells 3 cell series battery boxes which I Velcroed to the tube. The Zhumell 8 inch scope came with a fan installed, and was a plug and play, as the scope had a female jack and a switch built right in. I had a male plug, so a couple second quick solder job got everything connected. These 18650 cells are 4.3 volts, so 3 cells give you plenty of power, and they're rechargable. If I were to use AA cells like you did, I'd definitely use rechargeable batteries. A bit of expense up front, but you only have to buy them one time. I found your channel recently, I've watched all your videos, and enjoy them. Good work, and thanks!
My Zhumell also came with the cooling fan installed (unfortunately the seller had lost everything else, including the viewfinder, adapters, etc... and the mirror needed recoating, lol). Generally speaking, I've been very impressed with Zhumell equipment. Thank you for watching so many videos. I hope they were educational/helpful.
I just got my first telescope (I was planning on getting a dob, but got a great deal on a used starsense explorer dx 130az) and I'm hoping to employ some ove the upgrades ive learned about from your channel. I want to get a digital inclinometer, replace my collimating screws with some from Bob's Knobs, and possibly figure out a way to adapt a setting circle to a tripod. Thanks for giving me the courage to buy a used telescope! I never would have had the confidence without watching your channel.
Congratulations! I've heard great things about the Starsense Explorer system. The thing I like about Bob's Knobs is that he often has the exact screws that you need for your model. On occasion, you can buy similar screws from Amazon, but you have to be careful about the head sizes (they can sometimes be wider than the central mirror). Quick note about the digital inclinometer - just using that can get you very close to your target. Manually point the telescope as close (azimuth compass-wise) to your target, then use the digital inclinometer to get the exact altitude angle. Sweep back and forth and you'll often find your target. Good luck!
My space station photos are taken with my Zhumell 12 inch Dobsonian. It's a metal tube Dob. I have done it with an 8 inch Dob too, but that was a while ago.
The one thing I probably wouldn't have bothered with is the fan. Unless it has benefits beyond just acclimating the mirror. I usually set up way beforehand so I can collimate the finder scope to the OTA on some distant landmark while I still have daylight. The inclinometer was a nice tip though. Bought one for the workshop, but I could see myself using it for aligning my equatorial mount perhaps.
I agree that the utility of a fan is site-dependent. In my case, I can't leave anything valuable outside unattended (not the safest neighborhood), so the shorter the cooling time the better.
@@AstronomyGarage I wouldn't address the fan for basically the same reason as the comment above. Also, if it were to blow outside air past the primary mirror into the OTA, it would carry a lot of ambient dust and debris with it. That's why I prefer to wait a while for the mirror to adjust to the ambient temperature. Otherwise, your videos are perfect and I always look forward to the next one. Clear skies.
Excellent point. If you live in a pretty dry area (Arizona, New Mexico, high-desert, etc.), I can see where dust would be a big issue with fans. That's not a problem here fortunately. Thanks for watching!
@@AstronomyGarage Well John, I live in Central Europe but due to the light pollution where I live I am forced to drive my 12" Dobson far out of town into the field. So I know what I'm talking about in terms of dust and pollen season. However, my reward is the dark sky Bortle 1-2.
Normally yes, that is true. Most of the mount stalks have that little clip at the bottom. For some reason, the dual Y-adapter doesn't have the tip. I hope they start putting those back on.
That is a pretty good idea for a video. I like that. I have a big flexible black piece of cardboard that I use to extend the front of the Dobsonians to block incoming street lights.
Could never get used to using a right angle finder. I usually know what area of the sky I want to point at and looking directly in that direction is just second nature to getting me close. Half assed pointing it there and then looking down at your tube to look thru a right angle finder is a sure recipe to never finding what you want!
@@AstronomyGarage Yrs ago, when I was a teen, I made a 6" newt grinding and polishing the mirror (something every astronomy nut should do at least once in their life just to experience it... I went crazy and did a 12.5" after that! lol). Getting back to my point... That 6" never had a finder scope on it... I would point it like a gun by siting down the tube from the mirror end towards the area of the sky I wanted to look in and then go up to the eyepiece and start a methodical scan of the area with my lowest power eyepiece... if I was lucky the object I wanted to see could be found with a few swipes of my scope back and forth. But many times I had to go back and site down the tube again. Last yr I finally bought a Svbony finder for it with the white stalk. I was going to paint it black but after being out on a moonless night I noticed that leaving it white made it easier to see where the finder was against the scope so I have left it white.
Do you have stock in painters tape? Wheels con/360 circle con/level con/handles pro/CD disk sub pro/those disk need the raised area around the hole removed so the disk can ride on the whole disk and not the raised ring in the center. I removed the ridge on the disk and stacked them as needed on my 8 in dob and you can move it with your finger tip of your little finger. Lots of good ideas but a lot of over kill also.Learn where things are and you can scratch some of these projects.I was getting a thin cresent glow of light in my eye pieces so I black out the edge of the 2nd mirror and the focuser tub and that corrected that problem. When I got my 8 in dob it came w/9/50 finder the next year they put that pain in the neck finer on the XT"s. great show just keep them coming...
Replacing the setting circle and the inclinometer with some adhesive Velcro and an extra cheap case for whatever phone you use for astro hopper might offset costs a bit as well.
This may be the last time I add a setting circle. Since the advent of Astrohopper, I've been using them less and less. I do still use the digital inclinometer when trying to find objects at sunset or sunrise when the rest of the stars are nearly invisible.
@@AstronomyGarage yeah from my balcony i can see Leos triplet no problem, well its just a little village here but still have some annoying Street Lights. Even dimm Stuff like Dumbell Nebula or M57 is possible without even going to Dark Regions
Nice restoration project, good job! Maybe those "green eyepieces" were the main reason for you to buy the 10" dobsonian in the first place? 😂great video, clear skies!
Thank you for the kind words. I honestly didn't know about the eyepieces when I bought it. They had to dig this out of their closet and I was busy packing the telescope when he handed me the "grocery sack" of eyepieces. For the price I paid, I expected old broken eyepieces.
It wouldn't destroy the mirror, I got a 10" from a friend who had changed to longer bolts to move the mirror forward, and when I was adjusting it one went through and i heard a huge crunch. A big chip was made in the back of the mirror. Maybe I got lucky, but the views were not affected at all
@reflactor I could see that happening with your 14 conical, but not much chance on a full thickness mirror. But there is a chance that a chip could induce astigmatism if the shape of the mirror is affected, but that would have to be a big chip. I just took off the cap and looked down the tube of my 10 for the first time in over 3 years, yeah that thing needs a recoatong badly, not very bright, and (as it was when I got it for $60), many spots where thr coating is completely gone. It is a very old scope, when I got my GSO 10" in 2005 it had a crayford, and when I started at OPT in 2006, starhoppers were being made by synta not.GSO. I don't know when the change happened, probably 2004 when synta bought celestron. Mine has to be at minimum 20 years old , probably a few years older, and the original owner treated it like crap, and my friend got it for about $50 with a broken ground board which wouldn't slew. He had an extra base from a 12 which he gave me, and a groundboard swap fixed it, and also gave it wheels which came in handy when I used it from home, since I am in close quarters, maybe 8 feet of space between buildings, and no horizons, so the scope needs to be moved alot to be able to see over the roofs.. and because my van was stolen by the city of fountain Valley, home use is likely the only use that dob will continue to see. When m13 passes overhead it still gives a decent view, and I am probably bortle 9. Who knows, maybe I will get motivated enough to set up my 10" meade out front this summer, though I am probably more likely to setup the c8. Or just the 6" dob. The 4" refractor makes the most sense but all the counterweights except the 4# were in the van. I was really enjoying the 127mak I had re acquired (not the same exact one, but my 2nd scope 20 years ago was an orion 127mak), on the astroview with wooden vixen tripod out front, before losing the tube in the van. I still have some decent stuff, just no way to get it anywhere
You are correct. I use a rechargeable Talent cell pack to run my entire GoTo telescope and it works great. In this case, I chose batteries due to budget.
I was getting strange circles in the Celestron C6 I just bought. I called Celestron and sent them some photos and they told me that the "baffle" tube had not been flocked. I ordered some flocking material which arrived today. Am hoping for the best. I have 9x50 and 6x30 right angle finder scopes due to my bad back. Since most things I am looking for cannot be seen with a finder scope, I have found that my go to mount will get me close and SharpCaps plate solving feature can get my there. A 10-30 camera exposure will usually show me something. Could have done without the fan. Good work on your 10" reflector. Thumbs up!
Chasing nebulas, eh? Same here. Under my sky, the only viable targets are the Orion nebula and the Pleiades. Don't have a goto, all manual here, so I'm gonna have to learn to find the rest by star hopping or whatever.
@Reflactor Great vid John. I made a 60mm right-angled finder scope from old binoculars with a 40mm Plossl eyepiece for around $70 including the adjustment rings. That's always a good upgrade to find your targets. Far brighter image than a 50mm finder scope. I also used Medican bottle tops on my ten-inch Newtonian on the collimation screws, as I found they were not that easy to turn, they fit snugly but used some glue as well. I love the fan upgrade you used I have a few spare PC fans, and will use one in my next project like yours! Another upgrade that I have seen on Astrobuscits channel, is to take off the metal pads that hold the main mirror in, as it can pinch it, and use Adhesive double-sided pads to hold the mirror in the cell. Thanks again for your knowledge. Folks give a like for John as it helps his channel!
Thanks! Wow, you are the master of making astronomy equipment. About those mirror retainer clips... Mine don't actually touch the mirror. They are there to keep the mirror from falling down the tube, lol. Even the lightest tightening would flex the mirror and that would be bad news.
Should cooling fans and Dobsonians and Newtonians suck or blow? As I see it: In use, these telescopes are typically used pointing generally upwards. In damp conditions this is less important, but in drier and dustier conditions this will become increasingly important. Air close to the ground will likely contain more dust per unit volume of air, than air higher-up from the ground. A warm mirror will naturally warm air that will convect upwards past the mirror, into the tube carrying with it any dust in that air. A fan pushing air upwards will likely exacerbate this process. A fan that sucks air down through the tube will draw cleaner air through the telescope. Because of the dust, I suspect the latter arrangement is more desirable. It is true that the fan that sucks will have to work slightly harder, but a speed controller and choosing a higher quality, low-noise cooling fan will keep vibration levels down.
I absolutely love these types of projects on your channel. One of the best DIY telescope channels on youtube. Keep it up!
I'm glad they are useful. Thank YOU for watching! Clear skies!
Televue eyepieces with the scope, what a bonus. Lucky bugger.
As it turns out, I already have a full set of Tele Vue plossl's, so these were redundant (they are now in the hands of new owners).
You have some great, low-cost ideas. Putting a piece of rubber under the finderscope bracket would save a lot of heartache at night when you bump it and the bracket slips, moving the reticle by 2 degrees!
I used a red dot + RACI (I always say Rah-see, perhaps incorrectly?) for a while and then switched to using the RACI screws as a “gun sight” to make it simpler and lighter. Both of those solutions made me get off the stool and lean over the scope, or worse, get on my knees behind the scope. About a year ago I switched to a $15 laser strapped to the RACI with Velcro ties. It gets me within 5 degrees of the target and the RACI does the rest. Way better. I also often share a finderscope between scopes, to save a little money and have less junk to store.
I flocked my AD10 years ago. I found a significant improvement, but did not have matching scopes to compare like you. I live in a Bortle 8 area, so it may well because of house location that I noticed an improvement. I did not have enough experience at the time to see if it was an improved the views at my Bortle 4 or 2 sites.
Keep making videos!
The rubber anti-slide piece was out of necessity. I had a dovetail mount that easily got bumped with even the slightest push. I love the RACI viewfinders. I live within three miles of a large airport, so I can't use lasers unfortunately. I've heard good things about them (far from airports).
Hi. I designed this telescope for Orion back in the day. Interesting to see what mods you put on it. There is one piece of misinformation regarding "tube currents". The optical distortion of different temperature air is caused by the fact the air is at different temperatures, which causes it to have different indexes of refraction. The changing indexes of refraction is what changes the light path in the tube. In theory, if it was a hurricane inside the tube, but all the air was at exactly the same temperature, it would not distort the image. A minor point in what is otherwise excellent content. Glad folks are still using this scope.
You have a very unique skill set. Would love to email you some questions. Feel free to email me at JJDreese at yahoo dot com (without the spaces)
Amazing Video Keep up the good work! Clear skies😆
Thank you for the kind words. Clear skies!
New subscriber here. Really enjoyed watching this project!
Hello and welcome to the channel! Lots of videos to choose from.
Awesome job,
Thank you for watching. Clear skies!
Set circle best upgrade
Small parts painting least beneficial
All worthwhile
Thanks for watching!
"Ow!!!!" Love it! I like those solderless connection joints. Thats all I use anymore.
I was pretty smitten with these connectors - it worked better than I expected.
I don't solder at all. I split the end of both wires into two parts. Then wrap one part of wire 1 with one part of wire 2. Then the other part of wire 1 withe the other part of wire 2.
I bent the one wrap to wire one and the other wrap to wire two. Finally I shrink-wrap the connection. No solder, no special connectors, just shrink-wrap.
That's definitely a time saver. I may have to try that.
A 5v fan i think is a better option, because u could then just use a usb rechargeable phone power bank
That's a very smart idea!
The best fans are Noctua. No vibrations, no noise, IP rated and PWM speed control / sensing.You can also use a Arduino / RPI nano ASCOM controller.
love your vids ! keep making them ! for future reference , if you run out of ideas , maybe you could find a way to put an eyepiece on a raci finder or a filter on it .
Thanks! For now I have a ton of videos planned out, but I will add that to the list. Unlike the "big guys", my production rate is a bit on the slow side, lol.
Ah the green font. There was an ebay sale for a telescope with four eyepieces with the green font in the photos (not mentioned in the description), two panoptics and two naglers, I was swimming.
Wow! You found quite the treasure. I hope they were all in good condition.
I cant stand having only a right angle finder, it is so hard to aim the scope when you arent looking in the same direction you are aiming. I have really nice right angle polar finders on my vintage SCTs, that I wouldnt replace with cheaper modern straight finders, so the addition of a telrad really helps aim the scope.
In fact, I generally didnt use optical finders that often anyway, before my storage was broken into, I used gem mounted C11 and only used a telrad, and an 8"ARC(acf) that i just used a basic red dot with. On my televue 101 I used a starbeam, and a basic red dot on my pronto via a vixen dovetail base on the clamshell. I miss those scopes. I didn't get a dime from insurance so I had to start over with the least expensive scopes possible and through a trade for the losmandy tripod, counterweights and hardware the theives didnt know to steal, i got an old 10" meade, and through another friend i got an old c8 for a steal of a price.
I know the feeling. I had my storage building burglarized many years ago. Fortunately, it started raining really hard while they were there so they only got "half" of the good stuff. Still very upsetting.
@Reflactor
Just because sometimes things don't work as intended, is not a reason to be dissuaded from making your valuable videos. The person who never made a mistake never made anything. It is also much easier to criticise others than to attempt something difficult and awkward, especially when videoing it and publishing what went wrong. I am immensely impressed by some of the things you've achieved and I am fairly confident that had I attempted the same, it is likely that I would not have been successful.
If you go slow and be careful, I think we can figure most of these projects out. I stumble my way through many of them, lol.
For me, SVBony 6x30 RACI finder was a game changer. It shows so much more stars in light polluted area and unlike larger 50mm ones is gives very wide FOV of around 7.5° and is quite lightweight.
It is especially useful for setting up go to system as it is very accurate and has wide FOV.
I love the RACI finders. They are fantastic by any measure.
hey john tanks for all those great tips. I guess the one i never do is the flocking . Joe
I think I can say now that flocking didn't make much of a difference. :(
@@AstronomyGarage but u tried it to know and its good experience
Some people will say the small amount is still worth it
@@JoeJaguar Not for the time and money involved but some people have more money than brains and beleave all they hear
I run the cooling fan with 3 18650 Lithium batteries. Amazon sells 3 cell series battery boxes which I Velcroed to the tube. The Zhumell 8 inch scope came with a fan installed, and was a plug and play, as the scope had a female jack and a switch built right in. I had a male plug, so a couple second quick solder job got everything connected. These 18650 cells are 4.3 volts, so 3 cells give you plenty of power, and they're rechargable. If I were to use AA cells like you did, I'd definitely use rechargeable batteries. A bit of expense up front, but you only have to buy them one time. I found your channel recently, I've watched all your videos, and enjoy them. Good work, and thanks!
My Zhumell also came with the cooling fan installed (unfortunately the seller had lost everything else, including the viewfinder, adapters, etc... and the mirror needed recoating, lol). Generally speaking, I've been very impressed with Zhumell equipment. Thank you for watching so many videos. I hope they were educational/helpful.
I just got my first telescope (I was planning on getting a dob, but got a great deal on a used starsense explorer dx 130az) and I'm hoping to employ some ove the upgrades ive learned about from your channel. I want to get a digital inclinometer, replace my collimating screws with some from Bob's Knobs, and possibly figure out a way to adapt a setting circle to a tripod. Thanks for giving me the courage to buy a used telescope! I never would have had the confidence without watching your channel.
Congratulations! I've heard great things about the Starsense Explorer system. The thing I like about Bob's Knobs is that he often has the exact screws that you need for your model. On occasion, you can buy similar screws from Amazon, but you have to be careful about the head sizes (they can sometimes be wider than the central mirror). Quick note about the digital inclinometer - just using that can get you very close to your target. Manually point the telescope as close (azimuth compass-wise) to your target, then use the digital inclinometer to get the exact altitude angle. Sweep back and forth and you'll often find your target. Good luck!
Just watched on the tele, great job. Wasn't expecting the like on dust cover. Funny. God bless, clear skies neighbor.
Howdy neighbor! No star viewing tonight due to clouds over north Texas. Glad you enjoyed the video!
Which scope do you use for taking photos of the space station?
My space station photos are taken with my Zhumell 12 inch Dobsonian. It's a metal tube Dob. I have done it with an 8 inch Dob too, but that was a while ago.
The one thing I probably wouldn't have bothered with is the fan. Unless it has benefits beyond just acclimating the mirror. I usually set up way beforehand so I can collimate the finder scope to the OTA on some distant landmark while I still have daylight.
The inclinometer was a nice tip though. Bought one for the workshop, but I could see myself using it for aligning my equatorial mount perhaps.
I agree that the utility of a fan is site-dependent. In my case, I can't leave anything valuable outside unattended (not the safest neighborhood), so the shorter the cooling time the better.
@@AstronomyGarage I wouldn't address the fan for basically the same reason as the comment above. Also, if it were to blow outside air past the primary mirror into the OTA, it would carry a lot of ambient dust and debris with it. That's why I prefer to wait a while for the mirror to adjust to the ambient temperature.
Otherwise, your videos are perfect and I always look forward to the next one. Clear skies.
Excellent point. If you live in a pretty dry area (Arizona, New Mexico, high-desert, etc.), I can see where dust would be a big issue with fans. That's not a problem here fortunately. Thanks for watching!
@@AstronomyGarage Well John, I live in Central Europe but due to the light pollution where I live I am forced to drive my 12" Dobson far out of town into the field. So I know what I'm talking about in terms of dust and pollen season. However, my reward is the dark sky Bortle 1-2.
I would keep those Tele Vues!
Normally, I would, but I already have a full set of Tele Vue plossl's. :)
Well maybe those for a binoviewer
You could always turn the dovetail block 180 degrees
Normally yes, that is true. Most of the mount stalks have that little clip at the bottom. For some reason, the dual Y-adapter doesn't have the tip. I hope they start putting those back on.
We don’t have Harbour Freight in Canada, but we have Princess Auto, which sounds similar.
Probably. Harbor Freight is kindof a "convenience store" for hardware, but much larger and the products are exceptionally cheap.
Way to go John.
Thank you for watching! :)
Hi John,
Since you have more than one scope can you do a newt and observing spot optimized for urban use?
Thanks for the vids.
L
That is a pretty good idea for a video. I like that. I have a big flexible black piece of cardboard that I use to extend the front of the Dobsonians to block incoming street lights.
Wishin there was a love this button!
Haha, thanks! I think the Like button would work. :) Thank you for watching. Clear skies!
Could never get used to using a right angle finder. I usually know what area of the sky I want to point at and looking directly in that direction is just second nature to getting me close. Half assed pointing it there and then looking down at your tube to look thru a right angle finder is a sure recipe to never finding what you want!
I often cheat by using two viewfinders. First I use a red-dot finder to get me close to the target, then I switch to the right-angle finder.
@@AstronomyGarage Yrs ago, when I was a teen, I made a 6" newt grinding and polishing the mirror (something every astronomy nut should do at least once in their life just to experience it... I went crazy and did a 12.5" after that! lol). Getting back to my point... That 6" never had a finder scope on it... I would point it like a gun by siting down the tube from the mirror end towards the area of the sky I wanted to look in and then go up to the eyepiece and start a methodical scan of the area with my lowest power eyepiece... if I was lucky the object I wanted to see could be found with a few swipes of my scope back and forth. But many times I had to go back and site down the tube again. Last yr I finally bought a Svbony finder for it with the white stalk. I was going to paint it black but after being out on a moonless night I noticed that leaving it white made it easier to see where the finder was against the scope so I have left it white.
Do you have stock in painters tape? Wheels con/360 circle con/level con/handles pro/CD disk sub pro/those disk need the raised area around the hole removed so the disk can ride on the whole disk and not the raised ring in the center. I removed the ridge on the disk and stacked them as needed on my 8 in dob and you can move it with your finger tip of your little finger. Lots of good ideas but a lot of over kill also.Learn where things are and you can scratch some of these projects.I was getting a thin cresent glow of light in my eye pieces so I black out the edge of the 2nd mirror and the focuser tub and that corrected that problem. When I got my 8 in dob it came w/9/50 finder the next year they put that pain in the neck finer on the XT"s. great show just keep them coming...
I do use a lot of painters tape! No sponsors yet.
Replacing the setting circle and the inclinometer with some adhesive Velcro and an extra cheap case for whatever phone you use for astro hopper might offset costs a bit as well.
This may be the last time I add a setting circle. Since the advent of Astrohopper, I've been using them less and less. I do still use the digital inclinometer when trying to find objects at sunset or sunrise when the rest of the stars are nearly invisible.
fully worth it, my new 12er with all peripheral was About 1800
A telescope that size is one you keep for a lifetime. Have fun!
@@AstronomyGarage yeah from my balcony i can see Leos triplet no problem, well its just a little village here but still have some annoying Street Lights.
Even dimm Stuff like Dumbell Nebula or M57 is possible without even going to Dark Regions
Most 12v fans will run just fine on 5v from a small usb battery bank or you add a variable step up converter and control the speed
I didn't know that. My electronics knowledge is very very basic, lol. Thanks for watching!
Nice restoration project, good job! Maybe those "green eyepieces" were the main reason for you to buy the 10" dobsonian in the first place? 😂great video, clear skies!
Thank you for the kind words. I honestly didn't know about the eyepieces when I bought it. They had to dig this out of their closet and I was busy packing the telescope when he handed me the "grocery sack" of eyepieces. For the price I paid, I expected old broken eyepieces.
It wouldn't destroy the mirror, I got a 10" from a friend who had changed to longer bolts to move the mirror forward, and when I was adjusting it one went through and i heard a huge crunch. A big chip was made in the back of the mirror. Maybe I got lucky, but the views were not affected at all
With my luck, the too-long bolt would break the mirror in half.
@reflactor I could see that happening with your 14 conical, but not much chance on a full thickness mirror.
But there is a chance that a chip could induce astigmatism if the shape of the mirror is affected, but that would have to be a big chip.
I just took off the cap and looked down the tube of my 10 for the first time in over 3 years, yeah that thing needs a recoatong badly, not very bright, and (as it was when I got it for $60), many spots where thr coating is completely gone. It is a very old scope, when I got my GSO 10" in 2005 it had a crayford, and when I started at OPT in 2006, starhoppers were being made by synta not.GSO. I don't know when the change happened, probably 2004 when synta bought celestron.
Mine has to be at minimum 20 years old , probably a few years older, and the original owner treated it like crap, and my friend got it for about $50 with a broken ground board which wouldn't slew.
He had an extra base from a 12 which he gave me, and a groundboard swap fixed it, and also gave it wheels which came in handy when I used it from home, since I am in close quarters, maybe 8 feet of space between buildings, and no horizons, so the scope needs to be moved alot to be able to see over the roofs.. and because my van was stolen by the city of fountain Valley, home use is likely the only use that dob will continue to see. When m13 passes overhead it still gives a decent view, and I am probably bortle 9. Who knows, maybe I will get motivated enough to set up my 10" meade out front this summer, though I am probably more likely to setup the c8. Or just the 6" dob.
The 4" refractor makes the most sense but all the counterweights except the 4# were in the van. I was really enjoying the 127mak I had re acquired (not the same exact one, but my 2nd scope 20 years ago was an orion 127mak), on the astroview with wooden vixen tripod out front, before losing the tube in the van.
I still have some decent stuff, just no way to get it anywhere
It's not about the hourly rate if you enjoy the process and learning experience. 👍
I agree 100%. I have a blast doing these restorations and keeping them out of the landfill.
Personally i would use a rechargeable battery pack so i wouldn't need to but a bunch a batteries, the usually come in 2 packs too!
If budget waste a constraint of course
You are correct. I use a rechargeable Talent cell pack to run my entire GoTo telescope and it works great. In this case, I chose batteries due to budget.
I was getting strange circles in the Celestron C6 I just bought. I called Celestron and sent them some photos and they told me that the "baffle" tube had not been flocked. I ordered some flocking material which arrived today. Am hoping for the best.
I have 9x50 and 6x30 right angle finder scopes due to my bad back. Since most things I am looking for cannot be seen with a finder scope, I have found that my go to mount will get me close and SharpCaps plate solving feature can get my there. A 10-30 camera exposure will usually show me something.
Could have done without the fan. Good work on your 10" reflector. Thumbs up!
Chasing nebulas, eh? Same here. Under my sky, the only viable targets are the Orion nebula and the Pleiades. Don't have a goto, all manual here, so I'm gonna have to learn to find the rest by star hopping or whatever.
I really mean it when I say the RACI viewfinders are a neck-saver. I love them. Thanks for watching this restoration. :)
I completely understand. Bortle 8 here - I get Saturn, Jupiter, Orion Nebula, Pleiades.... and the Moon.
Mixing alkaline and standard batteries is not a good idea, but probably not that big of a deal just running a computer fan
I wish the electronic finders would shut themselves off after a while
I can't tell you how many times I've drained the batteries by forgetting. Even something like a three hour shutoff would be helpful.
@Reflactor Great vid John. I made a 60mm right-angled finder scope from old binoculars with a 40mm Plossl eyepiece for around $70 including the adjustment rings. That's always a good upgrade to find your targets. Far brighter image than a 50mm finder scope. I also used Medican bottle tops on my ten-inch Newtonian on the collimation screws, as I found they were not that easy to turn, they fit snugly but used some glue as well. I love the fan upgrade you used I have a few spare PC fans, and will use one in my next project like yours! Another upgrade that I have seen on Astrobuscits channel, is to take off the metal pads that hold the main mirror in, as it can pinch it, and use Adhesive double-sided pads to hold the mirror in the cell. Thanks again for your knowledge. Folks give a like for John as it helps his channel!
Thanks! Wow, you are the master of making astronomy equipment. About those mirror retainer clips... Mine don't actually touch the mirror. They are there to keep the mirror from falling down the tube, lol. Even the lightest tightening would flex the mirror and that would be bad news.
@@AstronomyGarage Keep up your great work John!
Like
Should cooling fans and Dobsonians and Newtonians suck or blow? As I see it: In use, these telescopes are typically used pointing generally upwards. In damp conditions this is less important, but in drier and dustier conditions this will become increasingly important.
Air close to the ground will likely contain more dust per unit volume of air, than air higher-up from the ground. A warm mirror will naturally warm air that will convect upwards past the mirror, into the tube carrying with it any dust in that air. A fan pushing air upwards will likely exacerbate this process. A fan that sucks air down through the tube will draw cleaner air through the telescope. Because of the dust, I suspect the latter arrangement is more desirable. It is true that the fan that sucks will have to work slightly harder, but a speed controller and choosing a higher quality, low-noise cooling fan will keep vibration levels down.
You make a very compelling argument.