Affordable ATV LED light bar options on Amazon - amzn.to/2spcwAx ATV LED Lights on Amazon - amzn.to/2MJDRpn Round Tube Mounting Brackets on Amazon- amzn.to/2qDuu1K
Awesome video, super informative and professionally done. You gave me the confidence to tear in to my 750 and put on the new lights. FYI in electrical nomenclature, the "I" is for current or "on" and "0" is for "zero" or off.
Great video. Going to do something very similar with my '18 Yamaha Kodiak 450. The only thing I would do differently is mount the switch on the left. That way you don't have to let off the throttle to turn off the light. That way, if someone is riding behind you and you have to turn it off for an oncoming vehicle you won't have to slow down.
Mark Jenkins this comment was 9 months ago but if you move the toggle you could always plug hole with a cigarette lighter or 12v aux snap on cover.... Maybe...
Thanks for the information I'm hoping to install one soon. Question, why did you not run the light bar wire under the front center plastic rather than on top? Tia
Does your light bar rub the four wheeler plastics at all? I saw it was pretty close. Want to add more light to mine but I don’t want it to rub and over time rub the paint off. Thanks
If you ride where there is a lot of mud, my suggestion would be to mount the light bar a lot higher. That would be caked in mud in about 5 minutes where I ride.
That's One Awesome Light Bar. Do you have to Notch the bracket in order to get it to mount up. I wanna do that same setup but I don't wanna get into Notching anything. Thanks
Very late reply but just follow the wires that goes to your headlight, check which one gets power when you turn on the high beam and just tap into that wire, run it to a relay and run that relay with a positive to your light bar.
Affordable ATV LED light bar options on Amazon - amzn.to/2spcwAx
ATV LED Lights on Amazon - amzn.to/2MJDRpn
Round Tube Mounting Brackets on Amazon- amzn.to/2qDuu1K
Awesome video, super informative and professionally done. You gave me the confidence to tear in to my 750 and put on the new lights. FYI in electrical nomenclature, the "I" is for current or "on" and "0" is for "zero" or off.
If you connect the square switch with continuous illumination on the switch is in that going to drain you battery.??
Great video. Going to do something very similar with my '18 Yamaha Kodiak 450. The only thing I would do differently is mount the switch on the left. That way you don't have to let off the throttle to turn off the light. That way, if someone is riding behind you and you have to turn it off for an oncoming vehicle you won't have to slow down.
Mark Jenkins this comment was 9 months ago but if you move the toggle you could always plug hole with a cigarette lighter or 12v aux snap on cover.... Maybe...
How does your lights were mounted.? I have a 2018 kodiak too
Awesome video! Lotsa night views of installed light bar.
Thanks for the information I'm hoping to install one soon. Question, why did you not run the light bar wire under the front center plastic rather than on top? Tia
Hi just wondering in the light bar is sore on battery as I am looking to get one just not sure weather the battery could keep up with it thanks
Does your light bar rub the four wheeler plastics at all? I saw it was pretty close. Want to add more light to mine but I don’t want it to rub and over time rub the paint off. Thanks
I have these similar mounting brackets but I find they don't tighten well and have alot of movement from the weight of light bar.
Great work man
If you ride where there is a lot of mud, my suggestion would be to mount the light bar a lot higher. That would be caked in mud in about 5 minutes where I ride.
That's One Awesome Light Bar. Do you have to Notch the bracket in order to get it to mount up. I wanna do that same setup but I don't wanna get into Notching anything. Thanks
Ok thanks for the heads up. Im not sure if it will work because mine is a 2018 Brute Force 750. I will have to take some measurements. Thanks again!
Is that light bar a Flood/Spot Combo?
Good video, thanks
Which round tube bracket did you order off ebay?
jmcgilbery they sell them on amazon for a cheaper price.
If I wanted to hook the wiring up to high beams with out a switch how do I go about it
Very late reply but just follow the wires that goes to your headlight, check which one gets power when you turn on the high beam and just tap into that wire, run it to a relay and run that relay with a positive to your light bar.
Love how all these diy videos skip the actual steps i came to see