6L80 overhaul
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- This video covers the overhaul of the GM 6L80-/90 RWD transmission used in many Chevrolet and GMC RWD and 4WD vehicles. These transmissions are still offered in 2020 models and arrived on the scene in about 2007. In this video, I cover disassembly, inspection, and reassembly of the transmission along with measurements and some description along the way. You'll find in this video, I also vacuum check the valve body and pump assembly to see if there are any worn bores. Also, I installed a TransGo shift kit to address the common valve body and pump issues found in this popular transmission. This video is intended to teach a student or a technician that's new to automatic transmissions the overhaul and operation of this transmission. This is part of the SIU Automatic Transmissions Curriculum, which can be found at:
www.automotive... Thank you Seal Aftermarket Products (sap.com) for providing me with a kit, and thank you TransGo www.transgo.com for providing me with valve body and pump kits. Look for another video where I show the different modifications performed on this transmission.
I just finished my first attempt at a 6l80 rebuild and it was successful thanks to this video thank you very much
what brand torque converter did you buy and where did you get it?
@patrickwarden2933 we use either (precision torque converters) or (dynamic torque converters) from W.I.T
This was the most educational video I've ever seen
Geez I'd pay to see you and Richard from precision transmissions get together...both of you are so good to watch at your trade...love it...greetings from Australia.
Bad gearbox, unreliable. I have it in my 2011 camaro SS, my mileage is 106.000 miles and gearbox is already kicking. The solenoids do not change, GM wants to make more money by selling the valve body assembly. All rubber bands are torn, you need to change a set of rubber bands. This gearbox does not like high speeds above 100 mph, since the oil pump is not designed for this. Why do you put such a gearbox in a muscle car if it does not fit a 6.2 liter engine?! I am very disappointed in GM
Thank you for the videos. I've downloaded this one and your video on the electrical and hydraulics for this transmission, and it is because of videos like yours that somebody like me is able to repair my own transmission, engines, and pretty much do all the things that other people pay thousands of dollars to have done for them.
Any guy that does not use a battery-operated drill to remove and replace bolts is the guy I want working on my stuff. Getting it done right is more important than getting it done quickly.
Well, by looking at all the clean parts, it's a safe bet this trans has already been taken down.
That's not saying he doesn't also use hand tools only, but just saying this trans has already been worked on due to all the parts being clean and dry.
Great video!
Some of us can’t handle the wrenches and ratchets like we used to.
Exactly. Takes his time. I rushed through fixing my truck and forgot to plug in my fuel pressure sensor/regulator...lol
It’s expertise
All the parts are clean and dry and marked. Nothing in it requires power tools
Most informative video of the 6l80 anywhere on the internet, very impressive, keep up the exceptional work sir!
Thanks for the video! Awesome detailed explanation of how the internal components work together. Appreciate the tips on options where special tools are needed to get the specific task done. Rebuilding my 6L80 in a 2014 Silverado, failed torque converter at 120k miles. Preferred to have my reputable local shop do the repair but their backlog was ~6 weeks to get it in. Videos like yours and an ATSG manual allowed me to tackle the project myself.
This videos got me very interested in transmissions, i find it fascinating how they work after seeing this.
My gearbox is just about shot and am tempted to try and do it myself, how did you go with it?
Dude I’m 16 and I just don’t have the money to pay a shop. If I don’t rebuild it myself, I won’t have a vehicle for high school. 😢 I think I’m gonna beg the guys at my local transmission shop to teach me because who doesn’t want to teach a high school kid their expertise. Most kids don’t just say oh I wanna learn how to rebuild a tranny. But now I have to. I want to fix it myself but my parents want to sell my 15 sierra 223k miles all original.
Just rebuilt one of these in the parking lot of the rv park. Fairly decent. Nothing like most other transmissions ive messed with. Just so easy to put this together.
Lang tools has a nice set of snap ring pliers for the center support ❤️
If you have the three specialty tools I can see how it's easy it was a nightmare with no holder for the bottom or top and normal snap ring pliers lol
the amount of complexity to a vehicle is mind boggling
The transmission is literally the most complex mechanical piece on a vehicle. It’s all downhill from there. And there is a alarming amount of people who don’t understand how the trans works that they are rebuilding. 6 speeds and up have a lot of moving parts and how they work together to create each gear.. which clutch packs apply in a given year… most guys that overhaul them don’t have a intimate understanding how how they work. They just know how to inspect and replace the parts. A true technician is worth is weight in gold
Revenioux gear set I think 4r70w
Idk how you don’t have more subscribers. I learned a lot from this vid!
Thanks for watching. Subscribers are growing slowly but surely. I guess we’re a little late to the game.
Do you have an upgrade converter you recommend for a Silverado 5.3 6L80? Thank you for this detailed video. It’s really nice to understand the drivetrain. Just subscribed.
Most good converter companies have upgraded converters available. Try Precision of New Hampton, Dynamic Converters, and Florida Torque Converter.
This is the best educational video that I have seen so far. He breaks each section down and I like the fact, that he doesn't pop out all the spacers out when he pulls out each device.
Sir, can I install Sonnax high-performance pump slide spring 104534-HD for 100% STOCK GM 6L80? 2011 camaro SS. The Sonnax spring is stiffer than OE and is able to hold the pump slide in a maximum-volume position, despite increased pressure and high engine speed in performance applications.
This was a useful video for me. Thank you for taking the time and sharing your knowledge. I am a master tech and have been working in professional shops for over 30’ years now. I have been able to tear down, diagnose (more or lees at times) and successfully reassemble/return to service several different units including now one of these. I still long to understand how it all works and what is actually going on during the different gear ranging. I would enjoy learning if I could find a class to attend and would gladly pay to attend a quality class. Thanks again! The explanation of the power flow was inspiring!
I’ve been slowly building the curriculum for transmissions at www.automotivetextbook.com/automatic-transmission-curriculum/
If you click on the chart, each box links you to a video, worksheet, or reference.
What would happen if you add an extra steel/friction in the 3-5-R assembly? Was having a hard time obtaining proper clutch travel even with a thick snap ring?
Very detailed video thank you very much for the time
Great very informative and educational video. I had a pleasure to watch and listen to You. Thanks a lot.
Some of the jokes in here caught me off guard. Those small channel locks specifically made me look away from the screen for a bit. XD
Thank you for this video, My 6L90 appreciates it!
The automotive school I graduated from in 1973. It is one of the best, if not the best, automotive school in the country. Most manufacturers hire graduates from this school because it is that good. (yes I am biased!)
I just had a new 6L80 put in my 4x4 2010 suburban I'm wondering when they changed the gear ratio the new transmission is lower geared then the old one but I like it better.the old one at 75 ran 1600 rpm and down shifted alot the new one at 75 runs 1900 rpm and holds 6th better doesnt shift as much .
Thank you for for these detailed walk through. Extremely helpful. Just did a low reverse sprag replacement, new clutches & steels, sonnax zip kit, sonnax line pressure booster, sonnax billet 1234 piston, and sonnax 456 apply piston on my turbo 5.3 12' sierra.
1:16:08 A##holes like this is how people mess up on their cars. 1) Skipped and didnt show which side the plastic part is on, it just disappears, do we just assume its on the bottom? 2) Completely DID NOT mention that you had to put one of the metal rings on the bottom, on the bell housing. If you gonna make a video, DONT SKIP OVER IMPORTANT DETAILS!!!
I have an 09 suburban with 6l80. 230,000 miles on it. I dont know if it's been rebuit or not. I have what i would describe as "shuttering" around 40-45-47mph at a normal acceleration what i would call 3rd into 4th gear (i could be wrong) with less, but some "shuttering " 4th into 5th. Some small rpm jumping duirng this, less thab 500 rpm. I notice that shuttering is lessened, or i just dont notice it as much when im at merging acceleration. I sitll owe 2k on this pile and have put years or work into it some im committed to fixing it. Im going to buy a screw press, compressor, slowly get ready, but what type of kits should i be buying? Im saving a lot of money doing it myself, so what's a nice mid range rebuild for this trans.
Hi, if it's not much to ask, I need help finding a part. I have a 2005 Ford Explorer 4x4 4.6l Limited. Well, I just resintly replaced the transfer case and when I went to put the new one on I noticed some oil dripping. It turns out that the seal on the transmission side needs replacing. Dealer don't make it anymore. Can't find an original part. What do your recommend? I believe it's called "transmission output shaft seal". Some help would be nice from anyone. Thanks
Hi. Great learning video by the way. Which overhaul kit is a good one to go with. I'm looking at the atp master kit or a transtec kit with bonded pistons. Which kit has more to offer. My wifes 2015 sierra torque converter crapped the bed and now its time for a rebuild as $8000 in the shop canadian is just unrealistic for a transmission overhaul. Ill be also getting the sonnax zip kit a new stator and pump, and a new torque converter. Any help would be much appreciated. Ive rebuilt the 4l60e's. So now the 6l80 for the rebuild.
Awesome video! Im converting my awd 6l80e to rwd, seems pretty straightforward just buy a rwd output shaft assembly and new tail housing and put it all back together ??
I replaced the selenoid shift control module on my 2018 1500 chevy and now it won't show the gear selector on the dash or move fordward but will reverse. HELP PRETTY PLS
During vacuum testing the valves in the valve body, how low is too low and requires the valve body to be replaced if the valves are new from Transgo? I noticed you had the 6-2 select test at 15 inches and seemed concerned but then didn’t say if it is acceptable or not. Thanks!!
You keep referring to guys who machine the pump. To be restored, they'd have to machine the bellowing half, and the pump. Plus the vanes and the rotor and the slide ring. That's a lot of work. And it would create excess end play and could also moving the pump to hub sealing rings into the wrong position. Seems like an expensive, time consuming gamble.
Pvc pipe, cut in half long ways. Then, assemble both halves around the ring and squeeze. Rotate the halves in different positions while squeezing. Then, finish sizing with whatever components the rings seal.
Hello
I have a question 2014 6L90 transmission does good until it heats up then it doesn’t want to pull in reverse, I have it torn apart but I don’t see anything worn. Can I please get your opinion?
Thanks
Herman Joned
Hi there great video and very informative. My question is is there any way or any kit out there that changes the first gear ratio.
Any information much appreciated.
Thanks
Sorry, I’ve never seen an alternative gear set with different ratios. TCS makes a billet rear carrier, but I think they use the stock plant gears, because they require a core charge when you buy their carrier.
I have an 08 gmc yukon 6l80 . I have a p0677 line pressure sol b stuck on. Truck has no gears at all. What am I looking at
I rebuilt a 6l80 using this video. I still have a slip under hard load in second gear. The only thing I didn't replace was the stator gasket. Could a leak somewhere on that only affect 2nd? Pressure is only reaching about 450kpa in 2nd, but 650kpa in others.
I’d have to think the problem would be with the 2-6 clutch. Did you air check it. What was wrong with it originally?
Well It was really only slipping in second the first time to, but when I pulled it apart it was the 1234 clutch plates that were completely wore out. I changed everything in the whole tranny including doing the two transgo kits. The only thing I didn't replace was that gasket under the stator. The pump looked good, there was no wear anywhere. Torque converter was fine but I replaced it anyways. I didn't have much ability to air test anything.
The 1234 pistons have a problem with cracking. You might pull the valve body down and air check the clutches. The bridge seals sometimes leak. If it air tests well, it might be the tehcm, but I wouldn’t think that’s it since you said it’s dropping pressure.
Thank you much for sharing this! I have never been in an ATX, only have messed with MTX units. I have a 2014 Silverado with the 6L80, it runs fine with no issues... I do have about 350k km on the clock though! I just like to have contingency plans and preempative learning, as nothing lasts forever and looking at 350k km... I would rather just rebuild before failure. The good thing is with the long time span this unit was used, spares are likely going to be avail for some time... But it is good to get an overview of some things that may be more prone to wear and failure. Looks like a bell housing and pump cover would be a good thing to have as original spares. I don't have a machine shop, but the price of them new isn't really too bad. My goal eventually is to have a donor truck, so I can rebuild and upgrade the engine and ATX from it ahead of time, without having my truck sitting inop in my shop. Then when my truck actually starts exhibiting issues, I can swap the rebuilt units in, and then be able to rebuild the worn and have as a backup spare.
It certainly looks like rebuilding the 6L80 in one's garage is doable, with some investments or fab of tools. Thanks again!
That’s some good mileage from that trans. The torque converter failures are what tears the pump and bell housing up. If you rebuild a trans, make sure you upgrade the torque converter. Find a converter rebuilder that uses the Sonnax upgrades.
@@siuautomotive It certainly will be interesting to see how the trans looks inside, I really am surprised, with all I have researched. I never knew there were rebuild items for TCs, though that certainly is out of my scope considering the machining required on the cover. I'll probably have to find specific shops for rebuilds with Sonnax, as most I have found have not stated exactly what they use. I also have looked into Circle D TCs. It has been quite interesting looking up TCs and etc, thanks for the tip! I originally wanted to delete the AFM and cam a 5.3L... Which lead me to think I should also build up the trans and related items to better withstand increased power (or forced induction, which is my eventual goal). Can't thank folks like you, sharing videos. Look forward to seeing more videos from you.
Hello,,,i juste built a 6l80,,,. i can not turn the shaft ( in bell housing ) by hand...but with some pliers its easy and smooth...is it normal,,,thank you
hi its all good !!!...it was the new pump bushing that was a little tight... polish it with 2000 grid and now its A1...had to do the same thing in the past for a 4L80
Great video who is need repair gm transmission. All is clear 👍
hi do you have rebuild info for a mitsubishi delica d5 2007 cvt auto trans cheers mate
Is there 2 different output shaft assembly? And do they use different speed sensors?
37min and 9 seconds you remove the silver washer is it normal to have wear on that part?
This video si they better explain about this transmisión thanks
07 Escalade AWD trans same as 14 Silverado 4x4 besides doin a reflash..?? Thanx for any info...
It depends. The Silverado might have a 6L90, which is a bit longer than the 6L80. Plus the 14 model will have a different TEHCM, that’s an updated part number, but the plugs are the same. I don’t think you can factory reprogram one to think it’s the other.
@@siuautomotive it has MYC rpo code.. thanx again
This a a fantastic video. I have spent a LOT of time watching transmissions be rebuilt. You do a great job presenting information and educating
Thanks for the compliment!
Greetings from the University of California! Amazing videos and information you have here! The planning and time involved are very evident to say the least...definitely a top notch presentation. I do a bit of automotive transmission work as a hobby and side gig so this info has been very helpful!
Wuaoooo what a video .:) nice .. it makes me to my own.
Informative video except in your description, you refer to it as a transaxle. Not so - it is a longitudinal transmission.
Ah, good find! I copied and pasted most of the description from the 6T70 video. I fixed it!
Hello Sean. I am hoping that you can point me in the right direction. Do you have a source for GM part numbers on the 6L80/6L90 transmissions? I have one apart & I seem to have misplaced the thrust washer that goes between the front input planetary & the 4-5-6 clutch housing assembly. The ATSG book shows a 4 tab washer. I assume that it's a 3 or 6 tab washer as the front planetary (6L90) has 6 holes. Thank you, sir, for sharing your wealth of knowledge.
I believe it's 24232426. You can google it and see some images. It's labeled as a sun gear thrust washer, but I believe it's for the planet. I used repairlinkshop.com to search OE parts. Set up an account (it's free) and you can view the factory catalogs. That thrust washer is only like 4 -6 dollars.
Thank you sir, much appreciated
Which branch speed handle is that? Is that a mac x17?
I believe the main issues with these autos is poor maintenance not changing the fluids regulatory or using cheap tans fluids, always you OE spec oils and fluids and also if possible instead a external transmission cooler with a built in thermostat, GM Make a good one used in the Holden SS or chevy ss 2013 to 2017 models and even aftermarket ones are good, just make sure they have a built in thermostat that way the fluid temps rises before the cooling starts otherwise you have cold air cooling cold temps which will make transmission play up as it needs at least minimal operating temps which is why the transmission had lines going to the internal radiator coolers to help get the temp up to operating temps easter? Heat is your main enemy in transmissions?
I live in Carbondale and have been having problems with my 18 Sierra K1500 with the 6L80. Would you happen to know any good shops that do a proper overhaul locally? I dropped the pan and noticed the fluid was black, smelled foul, and the magnet was covered in metallic paste. Took it to a shop figuring it was the torque converter, they agreed but said the transmission didn’t seem to have any other problems. However, this wasn’t a transmission shop so I’m not sure how thorough they got. The problems I was having before the torque converter was replaced, they used an OE TC, are now pretty much all back. Kind of at a loss. Any suggestions would be much appreciated.
sorry I was in a hit-and-run accident 3yrs ago I'm having and hard time through it. and it's no fun. sorry . Jay the Florida pool pump motor bearing repair guy When Service Calls Longwood approved ! that was good info 👨🔧 siu thanks
Anyone got a link to those big mamajama pliers?
I got 250,000 miles on mine proper care has been done to eat it just shifts a littler hard some times any idea?
Well, the pr valve wears out so bad I’d wonder if you are getting inconsistent pressures.
Just finished repairing a "come back". Still having problems. When driving and take foot off the gas, it feels like the brakes are applying when coasting, like its downshifting but slows down l
Thank you. You're such a knowledgeable person. Excellently made video. I just did my 6l80 with a billet tq & output shaft its built
Hola tengo un silverado 1500 2015,vivo en hollywood florida ,podria recomendarme al profesional de confianza y responsable para reconstruir mi transmision .
hello sir good video once again. I am having issues and I wondering if you can give some input, i tested the low revers with compressed air as you did but I only got movement on the very right port. the second from the left did not make it move at all. The transmission is on the truck, just dropped the pan and tested it. there is still some fluid in the transmission. thank you for your help.
I need a press like that. I can easily make one but I need that accessory your using. I've seen one before. What is it called, maybe even a part number?
Keep up the good work, guys like you make TH-cam amazing. The in-depth video and knowledge is amazing. You sir are helping to make people’s lives easier.
Looking at some of the videos while I'm at work, do you have one for taking a 4wd to a 2wd?
Thank you for taking the time to make this video. Sub'd and notified.
Damn I didnt remember writing this? :D
@@destainn I Dont either actually.
Mate i bet my life not one auto repair shop will do what your doing when doing a repair on a automatic transmission ,they simply pull it apart then replace those items which come in a kit as far as spare parts in a reco kit, but do not check the value snail lines or the plastic ball bearings and replace them with new better ones etc, your a expert when it comes to the GM 6L80E and i supposed the 6L90E is the same just with more h/dty clutches and more of them and a larger stronger center drive and various other options inside it?
Maybe, but the builders I know do a pretty thorough job. The 6L90 is a tad longer because they squeeze in another clutch in the 1234-3/5/R housing and the 2/6 housing.
What would be the cost of a new 6L80 made to be as strong as a 6L90, but with out the center driveshaft ,so can it be done, to make the 6L80 as strong as the 6L90, only because the 6L90E is longer and stronger, what can be done to make the 6L80E just as strong as the 6L90E but without turning it into a 6L90E longer unit?
The 6L90 has one more input clutch and one more holding clutch, plus the rear gearset is more stout. I don't know if it's possible to make the 6L80 as strong as the 90. TCS sells a upgraded rear planet, but aside from modifying pressures and maybe putting in performance clutches, I don't what else one could do. Thanks for watching the video!
I will be using this video to rebuild my 2014 Chevy Silverado 5.3
Great video! Glad I stumbled on it
Now has anyone really balanced every moving component in the auto transmission ,so basically weight and moving balancing of all moving parts? including snap rings or circlips as well australians call them? Also each gear is spot on as far as angles of each gear set and oil values channels, making sure they are as smooth as possible ,shining like chrome instead of the alloy aluminium finish, so basically the snail oil guilds etc, just asking that's all?
They are balance from the factory. That's why you can see random holes or machining marks on rotating components. As far as a shining surface is concerned, a glossy surface might not be ideal, because it might not transfer heat to the fluid as well.
The dome shaped tool that you use with the screw press. What is it called and where can I find one?
Your freaking awesome dude!!! And I don't mean maybe haha!!
Looking for the part numbers for the trans go kis you used on this video. thank you.
Thank you, You do very good job & great video.
&
What is the the best upgrade torque converter for 6L80 transmission?
is it TCI torque converter, B&M Racing torque converter or RECON TOW PERFORMANCE TORQUE CONVERTER FOR GM 6L80/90 ???
Personally, I would call Precision of New Hampton to get a performance converter. If they don't have one ready, I call Florida Torque Converter or Dynamic Torque Converter. They all should offer a converter with a billet cover and a billet piston. I'd opt for OE lining and then do a HP tune to it.
Hi hoping can help me, I'm using a GM LS2/LS3 Engine controller kit p/n:19354328 and want to run a 6L80E transmission, can you please advise what trans harness I would need to work with p/n:19354328?
Sorry, I don’t know that answer. You might post to the forum on hptuners.com and see what they have to say.
How much can I expect to pay for a job like this my 2018 Chevy Silverado 1500 rwd is shifting hard in low gears
It’s hard to say, but 3500 is pretty common for an overhaul. Maybe 4000 if they change the techm.
Where did you get that screw press and the attachment that goes with it? I graduated from SIUC in 2001 with an engineering degree. I never new (or even considered) that SIU had this type of thing. I wasn't worried about automotive stuff back then, and now I'm trying to root cause the failure in a 2013 6L90 from a Chevy Silverado 2500HD. Where are you located on campus? Did I walk past that shop all the time without ever knowing?
That press is a gm tool that’s designed to work with almost all of their transmissions. There are many other clutch spring compressors out there. If you google “transmission clutch spring compressor” you see a bunch of different options. I used that press because it was convenient. We are located at the si airport between Carbondale and Murphysboro. Are website is automotive.siu.edu. Thanks for watching the video and I hope it helped.
First off thanks for an amazing educational video of the step by step. Question what rebuild kit are you using bc I have the same transmission 6L80E MYC. And I’m trying to find one that includes everything I need
I get my kits from wittrans.com. You can look everything up online, but call and talk to a salesman because it’ll be cheaper.
What rebuild kit did you use for the clutch plates and steels?
I use kits from Witrans.com, transtar1.com or slauson.com. Also check the dealer, because sometimes their kits are cheaper. Download and signup with repairlinkshop.com to check dealer prices and availability.
@@siuautomotive great thank you! Very informative in your work! Thank you so much for the reply and the knowledge you give away! Keep up the great work brother!
Hello how you doing, I have an issue with a 2014 Chevy express 3500 ,6l90 trans. The issue is when your going 70mph you put the cruise control on then when it down shift from 6th to 5th, it won't release the 6th gear what so ever, the same shifting down and up manually, please help any idea what could be wrong.
Any idea what could it be thks.
I'm not sure what you mean by "it won't release 6th gear." If 6th gear stayed applied, it would bind up and feel like someone hit the brakes. The transmission wouldn't last long if this were happening. If you mean that when it downshifts to 5th gear the engine flares up, then it might be an issue with the 3-5-R hydraulics. The 3-5-R clutch housing is known to crack. These transmissions also have issues with their TEHCM (control module and solenoids), so it might be something to do with that.
Great video
What would cause first gear to go out completely one day and have it again the next? Did have a weird 1-2 shift under light throttle for a couple months prior. No codes btw
Good video, I may use this video one day if I have issues with mine!
If you machine the bell housing what about the pump housing thickess and the vanes. You are gonna need to do something to get that .001 to .002 back. You didn't say how to fix that part?
Yes, whatever thickness removed from the pump pocket will need to be removed from the pump mounting surface. There needs to be about a .0015 gap between the rotor and slide and the pump mounting surface. Some will also machine the surface where the bell bolts to the case to keep endplay the same, but some will use the superior or sonnax shims to adjust instead.
the bolts that hold the p/n switch and the 1 ne behind are 10mm the 2 on the side of the techm are 8mm
Any idea what would cause a 6L80 to “fall” out of 1st gear idle and “snap” into 1st gear once the rpms get to 1,500(doesn’t consistently happen). But only on shift pattern X and Y. But Tap shift commanded 1st or 2nd no issue
The low sprag slipping could cause this. I’m not sure, but the pcm might leave the l/r clutch on when tap shifting. The low sprag and l/r clutch holds the same component.
Please help lol!! I rebuilt my 6l80 I did air check all gears holding except compensator feed should it hold air like the clutches and gears I understand how it works just not sure if it should hold air did the test no converter , tail housing or valve body
I don’t believe the compensator will air check as well as the clutches. When you rebuilt the trans, did you change that bearing in the 3-5-R/1234 drum? It has a seal built into it to seal off the compensator passage. If that’s installed incorrectly or the seal is damaged you’ll get a worse air check.
Great video, my best regarts to you and thank you for the time and information.
Do a rebuild video for a Dodge 545rfe transmission.
I think its great to stumble across someone who still works with natural pride and applies proper procedure when performing a skill. It restores my faith that some future techs are getting the right knowledge and also the correct way of applying the skills they are in the process of mastering. I will definitely let some of my younger gear head associates to invest their spare time into tuning you in.
Please explain how the oil pump works and how it is spoiled
A overhaul can be done in less than 2 hrs that’s crazy
Very informative. Question..what year did they change from rotational rings to non rotational rings on the pump. My buddy has a 16 truck and smoked his 6L80 good. Hardly moves. Dealer told him ya ots the converter. I droped the pan and the fluid was thin, VERY dark and smeeled extremely burnt. Magnet had so much metal and even more in the pan wasn't even on the magnet. Well I've got a 11 6L80...can I just swap the "guts"
You should be able to switch the guys. The non rotational stators were very early, like maybe 08 and earlier. So it shouldn’t be a problem. I suggest installing the transgo kits in it while it’s apart.
@@siuautomotive great info, thanks again
I believe there's a different piston drum, which has more surface areas on the edge of it, which allows the more pressure or easier pressure to be applied to the clutches, which is a upgrade aftermarket ,so are there other aspects of the internals which can make it stronger and last longer?
Sonnax make some performance parts for the 6L80/90. www.sonnax.com/gm_6L80_6L90
think you
What transmission vice is that? Anyone know?
Hello sir! I got a 6l90 from a online parts place.they claim it got 45k miles. I pulled the TC out and got black color oil spilled. That got me wondering-did i get a really burned up unit? I never seen a transmission with black oil. Or its something new i don't know about?
Thanks
Hmm, black oil doesn’t sound good. Does it smell burnt? I would take it apart and freshen it up and put a transgo kit in it.
@@siuautomotive it does smell burned. The fact is that i bought it as a low mileage (45k miles) working unit. But its been more then 30days. I will try and claim it as a loss with my credit card bank..
I appreciate you sharing knowledge for everyone to see. I have a 2008 Sierra and I have just pulled the engine to change out the cam bearings because it has low oil pressure. This is my first time pulling an engine and before this have only done basic repairs. With my limited knowledge I made a mistake when attempting to pull the engine out. I didn't loosen the torque converter bolts and when I was attempting to pull the engine out a quart or two of transmission fluid came out from the engine side of the bell housing. I was wondering if I screwed up the torque converter or if I will have to tear apart the transmission as well and do some repair to possibly the pump. After watching your video I am considering doing the transgo kit for the pump since the truck has 160k
Inspect the converter hub to see if there’s any damage. I would definitely install the transgo shift kit since it’s out, and I’d actually replace the converter while you’re in there. The converter is a weak link on that transmission. A reman converter from a good supplier like Precision of New Hampton, Dynamic, or Florida Torque Converter will have many upgrades that even a stock engine should use.
How can one contact you in person ??
Throw phone
What happens if you have no free play in the 1-2-3-4 and 3-5-R clutch packs? i've disassembled and reassembled them several times and cant get the prescribed clearance. I thought there might be a problem with the pistons, but have redone them several times. Changing the snap ring thickness to the min wont make a difference. I bought the 6L90 trans out of a 2010 diesel ambulance with no fwd or rev movement. Fluid was not burned. I didn't check the filter for cracks which would be the most common cause. There was no metal in the pan and no obvious problems found with disassembly. Thanks Bob
Was there clearance before taking them apart? If so you must be assembling them wrong somehow. Is it a new drum? The 80s are different than the 90s. There’s a different apply ring as well. Maybe a parts mis- match. Regarding the no movement, I’d make sure the torque converter is good, make sure to check the check balls to make sure they haven’t shrunk and are in the right place, make sure there are no cracked films in the tehcm, Some have had the rear output gear shear. If you have a pressure gauge, you could verify pump pressure. I believe a sticking compensator valve can cause no movement. A gauge and checking for dtcs would likely help.
I found a snap ring improperly installed on the 3-5-R piston. Another U-tube video said that the 6L80/90 trans used a different number of steels and friction plates. Removing 1 set from the 1-2-3-4 set did the trick. The manual I bought said it was for the 6L80 instead of the "90". pictoral in the manual indicated I had too many 3-5-R steel/friction plates installed. I find it odd if the 90 is longer than the 80 why would the weaker trans have fewer plates? my freeplay is within specs now. Thanks for a very informative video. Bob
Just getting on the bench and learning the 6L80 built two so far no problems going back over your videos because this last one go forward in reverse lol taking it back apart Monday seeing what I can find. Thank you for making these very informational.
So what happened? Did you miss the manual valve when installing the valve body? That’s pretty easy to do.
6l90 ring gear is a crush fit I believe.