I lost my password. How do i reset mu dvr. On front it say APRICA and it has a aHi 3520 chip. On mother board a sticker with 7808T -ELD 2016121504. Do not know where the jumpet reset holes 8s and no reserlt button
So I have a Qsee QC918B dvr, forgot password, Qsee as of Dec 2020 out of business. I found J1 but there are 4 spots 1,2,3,4, not certain if this will also work.It looks almost the same as you video with that exception.I unsoldered battery but still don't reset, will your procedure still work and should it be J1 pin 1 to 2 ?
I have the same dvr model and needed to reset the password. I opened up the dvr and tried shorting J1, J9, J2 (pins 1-2) but nothing. Were you able to reset the QC dvr and if so, what pins did you short? Any help will be appreciated!
5:52 Hi,Ji,DHI NVR4216-4KS2, I Found the J1 jumber in front panel only ( not in Mother Board) with one square and one Round shape, Shall I short that points?(for factory reset). you..Your video's great...Thank you..
@@benjemaamohamed4504 if there is no reset button on the main board, then try to find out the jumper for reset it. It could be near to the power button or surroundings of hdmi port.
que tal amigo, sabes? mi xvr estaba funcionando bien pero hoy lo desconecte por la mañana y en la noche que lo conecte de nuevo se ve la pantalla rosa y parpadea, lo cual no se ve claramente, vi tu vídeo, cres que si realizó el reseteo se componga? o si sabes que le pasó a mi xvr me podrías orientar? gracias y saludos.
@@BilalKhalid I thought of that, but if I check continuity my multimeter beeps when I press the button. I still tried shorting the pins, but nothing seems to do anything. It shows the logo when powered on, then the screen goes blank for a bit and the camera squares come on the screen, which is what it does without pushing button/shorting pins. I think this one is somehow locked down. I also tried desoldering the cmos battery to see if that might clear it, but that didn't do anything either.
good day . . if reset is done . . .how about d hard drive installed ? it will not re configure . . . .or re format again ? problem is there is file vid to be back up
Can you help me? I have a 16ch from stanley/dahua lost my password. No reset button and other jumper. I have 4 pieces. J1/c1/tvs1/tvs2 Shortcutting does not work
Hello bro, i hv issue regarding time. Dahua 4104HS model, after shutdown its reume from exit time. Tried many times with new cmos batteries but no solution found. What should need to do with it?
Check the cmos batter is connected well with the main board with multimeter. I am sure the is with the CMOS battary or connecting pins in the main baord.
@@BilalKhalid when cmos battery remove time will become 2000,but inserted cmos battery,its stored time but after shutdown it will return to previous shutdown time,what should i do brother, kindly give me solution. Thank you
Hello, I purchased a UL-TECH wireless cctv system model CCTV-WF-CLA-4C-4S with Serial No.NA018552. i was trying to set up for the first time and following the instructions manual. I already sets the camers, NVR and monitor. In setting up the system It tells in the instructions that if logging in for the first time the default ID was 'admin' and leave the password 'empty or blank' and press 'ok'. But when I click 'ok' it says 'username/password in incorrect!'. How do I know? Please help to fix this. Also can't find the J1 on mother board.
It means this dvr or nvr was not new, or you are not the one who unboxed it first. If someone opened it earlier, you are requested to contact the shop from where you purchased it.
My dvr settings revert back after reboot ive changed cr2032 battery ive tried default system i try format hard drive even un and replugged in hard drive i try deleting default account and admin account which both seem to be reserved users cant delete either......no matter what every time my dvr reboots its groundhog day again..... any ideas
@@BilalKhalid I have the same network video recorder. J10 has two points labelled 1 & 2. There is a K1 point where, in many videos, the reset button would normally be soldered onto. I have a photo of the mainboard if you were able to assist, but do not know how to upload on this platform. Cheers, Reneau
Dear bro I have dahua dvr 4 and freezing in starting. I formatted HDD, reset, all cable unplug and plug but still freezing. Board is okay Somebody told me upgrade software Guide me how to upgrade software
I have a xvr Dvr and the power button turns on and off. I can’t capture live event nor can I go to the video for replay. Also I notice that I am not seeing the infrared on the cameras. All the cameras are quiet, no clicking when capturing motion nor no infrared. Please help.
Subscribe To My Channel www.youtube.com/@bilalkhalid/?sub_confirmation=1
Defaults username and password is admin admin ? Or? Please answer this if you can,and THANKS TOO MUCH FOR RESET BUTTON 🙏🤲🙌
I lost my password. How do i reset mu dvr. On front it say APRICA and it has a aHi 3520 chip. On mother board a sticker with 7808T -ELD 2016121504. Do not know where the jumpet reset holes 8s and no reserlt button
So I have a Qsee QC918B dvr, forgot password, Qsee as of Dec 2020 out of business. I found J1 but there are 4 spots 1,2,3,4, not certain if this will also work.It looks almost the same as you video with that exception.I unsoldered battery but still don't reset, will your procedure still work and should it be J1 pin 1 to 2 ?
I have the same dvr model and needed to reset the password. I opened up the dvr and tried shorting J1, J9, J2 (pins 1-2) but nothing. Were you able to reset the QC dvr and if so, what pins did you short?
Any help will be appreciated!
I got the same dvr I did it but it's not showing on the tv
It works for my XVR-1B04, thanks a lot Bilal.
bht videos dekhi but ap ki explaination bht ala hai
thx you guys i reset my pswd by your help we love you sir
Thx
I just did a hard reset. Thank you,it worked.
thanks. I only set my DVR local so I never setting email or internet over it. I didn't think the reset will require this much trouble
Good job... i Will try this metode. Thx a lot
Welcome sir
thank you so much.ill give you a big big hug😘😘
Always welcome
5:52 Hi,Ji,DHI NVR4216-4KS2, I Found the J1 jumber in front panel only ( not in Mother Board) with one square and one Round shape, Shall I short that points?(for factory reset). you..Your video's great...Thank you..
bohet acha maine try kra thank you dear
Thanks bro you are grate work💞💞💞
It works perfectly, thanks 👍🏻
Thanks bro you genius it worked.
You're welcome!
Thank You for the information. Will I loose the video's I have on it already if I reset it??? I have a Demerji DVR
No data will be save as it is
It's working bro 😀
Thank you 👍
I have Dahua DVR. I found J1 but it has 4 halls. 1 square and 3 rounds. Which should i put together?
There is J7 ...Two holls...(1 square 1round) ..it will work..
iT WORKED, THANK YOU SO VERY MUCH
You're welcome!
Thx For sharing ,
If i reset the dahua, can i see the old record ? Or i will lose my data?
Yes, you can access your old data
@@BilalKhalid thx , have you a solution for doing a hard reset to the xvr5108hs?
@@benjemaamohamed4504 is it dahua brand?
@@BilalKhalid yes sir
@@benjemaamohamed4504 if there is no reset button on the main board, then try to find out the jumper for reset it. It could be near to the power button or surroundings of hdmi port.
que tal amigo, sabes? mi xvr estaba funcionando bien pero hoy lo desconecte por la mañana y en la noche que lo conecte de nuevo se ve la pantalla rosa y parpadea, lo cual no se ve claramente, vi tu vídeo, cres que si realizó el reseteo se componga? o si sabes que le pasó a mi xvr me podrías orientar? gracias y saludos.
thanks alot ,very use full
its realy good working
It's worked thank you ❤
Really work Thanks
Thanks bro it's working
Thank you.
Thanks for the Video Brother❤❤
Thanks!! In my case, the J1 holes were hidden under a sticker
Glad I could help
Is factory reset locked on some DVRs? I have the reset button, but it doesn't do anything on this N42B2P2 dvr, and I don't see any 2 pin jumper holes.
Sometimes button doesnt work due to dust and carbon inside button, If there is a button then try to short 2 legs of the button and try.
@@BilalKhalid I thought of that, but if I check continuity my multimeter beeps when I press the button. I still tried shorting the pins, but nothing seems to do anything. It shows the logo when powered on, then the screen goes blank for a bit and the camera squares come on the screen, which is what it does without pushing button/shorting pins. I think this one is somehow locked down. I also tried desoldering the cmos battery to see if that might clear it, but that didn't do anything either.
good day . . if reset is done . . .how about d hard drive installed ? it will not re configure . . . .or re format again ? problem is there is file vid to be back up
زبردست
Thanks...👍👍👍
You're welcome!
Bro if we reset this then all setting bcome reset or only password. I mean all recording also reset or no
Recording will not erase for sure. go ahead , thanks
Tnk u very much brother
Welcome
what is that device you holding for shorting those jumpers? thank you
Twezer
Thanks dear
Welcome 😊
Thanks ur tips worked
You're welcome
Thank you great help
Can you help me?
I have a 16ch from stanley/dahua lost my password.
No reset button and other jumper. I have 4 pieces. J1/c1/tvs1/tvs2
Shortcutting does not work
Ronald Landman find J1 on board and short it as I showed in video
Ser very very very very thnx 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍 ser name plz
You’re welcome
Great job bro.. thanks..
What if it has j1 has 4 holes do you short all those?
no no
hi can you help?cenos dvr I do not seem to have a j1 port in order to follow your instruction.thanks
Merci 🙏🙏🙏
This is not a password reset, this is a device reset, 2 very different things
wow what a discovery this years noble prize the best sh*t eater will be given to you congratulation
Brother in mine xvr j1 is opposite site and different from as you shown but as you shown j1 jumper in mine its j7.
What should I do
Do you want to reset password or what?
broo very very thankful
Good Job My Friend
Thanks for the visit
Thank you very useful
you're welcome
Hello bro, i hv issue regarding time. Dahua 4104HS model, after shutdown its reume from exit time. Tried many times with new cmos batteries but no solution found. What should need to do with it?
Check the cmos batter is connected well with the main board with multimeter. I am sure the is with the CMOS battary or connecting pins in the main baord.
@@BilalKhalid when cmos battery remove time will become 2000,but inserted cmos battery,its stored time but after shutdown it will return to previous shutdown time,what should i do brother, kindly give me solution.
Thank you
thanks for the video
thanks alot.it worked
If hard reset this os also delete the video record ?
No, It'll not erase the data
Hello sir velvu hdr mai password reset kerna hai same process j1 or other plz reply
Find the reset button first on the main board
I try but its not working sir,
THANK You sooooo much
You're Welcome
Hello,
I purchased a UL-TECH wireless cctv system model CCTV-WF-CLA-4C-4S with Serial No.NA018552. i was trying to set up for the first time and following the instructions manual. I already sets the camers, NVR and monitor. In setting up the system It tells in the instructions that if logging in for the first time the default ID was 'admin' and leave the password 'empty or blank' and press 'ok'. But when I click 'ok' it says 'username/password in incorrect!'. How do I know? Please help to fix this. Also can't find the J1 on mother board.
It means this dvr or nvr was not new, or you are not the one who unboxed it first. If someone opened it earlier, you are requested to contact the shop from where you purchased it.
hi ...Please can you help me to reset this model...EyeCam xvr4119
Is it by dahua?
@@BilalKhalid no :((
Try to find reset button on the main board
@@BilalKhalid i don't have button...give me your email so I can send you a picture of the motherboard
Thanks sir for my help
Bilal, I have a N41B2P2 and there’s no button or J1 jumpers to short out. Any help?
is it dahua brand?
@@BilalKhalid It is, it's a Dahua N41B2P2
hi I have a 16 channel Dahua-xvr4216AN all I see is j29 with 3 holes,j12 ,4holes,j11 4 holes which is the reset jumper?
Jumper should be 2 holes with 3v output one of the points.
@@BilalKhalid unfortunately no 2 holes anywhere on that board is there a technical support email you know of coz i havent got any reply two days
I have old Hikvision Model is DS-7204HVI-SN , so can you tell me , where is the jumper J1 ??
In hikvision there is no jumper
In all dahua xvr/dvr has same jumper number J1, pls reply
No
@@BilalKhalid how to reset xvr4b16
Thanks sir you talk to you DVR reset password thanks
Thanks 👍 your
This only for dahu company or all other company?
Only for Dahua
thx, it worked.
My dvr settings revert back after reboot ive changed cr2032 battery ive tried default system i try format hard drive even un and replugged in hard drive i try deleting default account and admin account which both seem to be reserved users cant delete either......no matter what every time my dvr reboots its groundhog day again..... any ideas
Check the cr2032 is connected wel on the board? Second do factory default settings and check
Thanks thanks a lot
welcome sir
I have this model number N52B3P Dahua
Same steps
I need to open it ?
I am from Trinidad and Tobago I bought a epcom dvr and it only asking for admin password of which I don't know please help me it is a 4 channel
would you how to disable password setting?..i hate going thru this process each time i open the dvr..could you help.
Thanks g
Welcome
Hi , do you know how I can do it for a hikvirsion ds-7604ni-k1 ?
Clueless
Спасибо 🙏
Thanks bro
Any time
Can this step be using for hikvision dvr?
No
@@BilalKhalid anu solution for that ?
@@anip137 would like to see the clear image of main board
@@BilalKhalid can give email address.. I email to you .
@@anip137 +44 7468 967559
Bro... The same board its not getting reseted, auto restarting itself. could u help out how to download this board's firmware..?
Thax sir
You are welcome Sunny
Can you help me about my dvr.its hikvision and i cant find j1 hole.
The model unit is 7200 series turbo hd dvr.please help!
I would like to see the clear image of mainboard. thanks
How to reset if we have a reset button n its not getting reset by pressing the button due you have another option for that
if you have reset button then make sure that button is working or not
I didn’t see J13 in Xvrcda820. Please reply ASAP (cantonk)
Which company’s dvr ?
@@BilalKhalid Cantonk
@@yesubcnp this method may only apply on dahua dvr only sir
Thanks for the info bro.
But my dvr is not showing display.
hi Terry, My Dahau NVR does not show display as well. Did you mange fix it? and how?
Buenas tardes cuanto tiempo tenemos que presionar el reset?? por favor me podrían colaborar por favor
20 segundos
Thank you so much! Thanks to you I was able to reset my system
Hi , could help My Dahau NVX same version your, but it does not show display.
Hi please help me with the dahua NVR 4216 , i seem not able to find the J1 jumper. Thanks
Can you help me with owsoo dvr password reset. Have seen the J1 tried to jumped it but its not working. Can you assist please
Nice videos
Thank you
Hi,
Please can you help me to reset this model : dahua DHI-NVR 4108HS-8P-4KS2?
Thanks very much for your response.
I would like to see the main board
@@BilalKhalid I have the same network video recorder. J10 has two points labelled 1 & 2. There is a K1 point where, in many videos, the reset button would normally be soldered onto. I have a photo of the mainboard if you were able to assist, but do not know how to upload on this platform.
Cheers,
Reneau
drive.google.com/file/d/13GpX1pdb3sqsmbPD0yVqkdqMheu1vrlz/view?usp=sharing
@@BilalKhalid drive.google.com/file/d/13GpX1pdb3sqsmbPD0yVqkdqMheu1vrlz/view?usp=sharing
hello , and this model dhi-xvr4108hs is possible reset password? thanks
Yes
@@BilalKhalid is the bridge pin too? Thanks
my j1 has 4 holes i have tried various combinations of two holes without success
You need to do all 4 at the same time
Thanks this video
Bro hard formate nai hi rahe yahi model ha options ma bhe nai ho rahe
Hard disk kharab ho gi
Do you have a solution for a Dahua DHI -NVR 608-32-4KS2. It does not have a J1 jumper. Looks like J16 with 3 jumper points. Could you assist pls?
Hello sir, it is same for acumen dvr.
Thx
No it is not
Dear bro
I have dahua dvr 4 and freezing in starting.
I formatted HDD, reset, all cable unplug and plug but still freezing.
Board is okay
Somebody told me upgrade software
Guide me how to upgrade software
Visit the official website of dahua and find out there latest firmware. But I think you cant upgrade the firmware until dvr is in stable condition.
Helo sir 🙏 my NVR also forgot password no reset button I can use same method
Yeah
How about unbind with app have been assosiate to dvr before
شكرا لك على الفيديو
I have a xvr Dvr and the power button turns on and off. I can’t capture live event nor can I go to the video for replay. Also I notice that I am not seeing the infrared on the cameras. All the cameras are quiet, no clicking when capturing motion nor no infrared. Please help.