Chiedo aiuto: Non funziona il bilanciamento dei carichi della mia Thor_07ASP Imposto la modalità Fast. Nelle Impostazioni: Impostazione della stazione EV: corrente uscita massima dal palo elettrico (a): 18 (che equivale a 4kw circa). Bilanciamento del carico: abilito e imposto un nuovo periodo (ogni giorno, tutto il giorno), massima potenza importata dalla rete: 4,5kw (ho il contatore da 5kw). Però, se inizio la carica a 4kw (a cui si aggiungono consumi istantanei di casa di circa 0,5kw) e dopo accendo il forno, la pinza amperometrica della colonnina segna 6kw (l'ho lasciato per 2 minuti e poi ho spento). Come mai???😭 (versione firmware THOR_07AS-V4.2.13-20230714)
Hi, thanks for your videos. The EC charger works without wifi? This have Bluetooth too? I need to install the charger in a parking with no internet. Regards.
Yes. The charger is great. The only downside is for Teslas. There is no unlock button on the handle and I have to unlock the port from my phone or the car.
I was unable to test the PV linkage. I need to get more sensors for 3 phase system. My main fuses are 63A and the one going to the charger is 50A so no issues there.
@@komjazz I have only one phase but it is splited on three conductors. No idea why I don't have 3phase input. So that's why I use single phase charger. In order to use pv linkage I have to monitor those three conductors.
Good morning, Sir, I am contacting you because I am really lost in the commissioning of a Growatt Thor 22 as-p... I am an engineer in Belgium and I have a small renewable energy company! I have no answer from the Growatt technical department. I have already spent hours on ShinePhone and ShineTools but I cannot add and make the commissioning of this E-V Charger! LinkdIn is my last hope to contact Growatt and try to get help... I hope you can help me or direct me to someone who can help me. In advance I would like to thank you. Sincerely yours.
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Chiedo aiuto: Non funziona il bilanciamento dei carichi della mia Thor_07ASP
Imposto la modalità Fast.
Nelle Impostazioni:
Impostazione della stazione EV: corrente uscita massima dal palo elettrico (a): 18 (che equivale a 4kw circa).
Bilanciamento del carico: abilito e imposto un nuovo periodo (ogni giorno, tutto il giorno), massima potenza importata dalla rete: 4,5kw (ho il contatore da 5kw).
Però, se inizio la carica a 4kw (a cui si aggiungono consumi istantanei di casa di circa 0,5kw) e dopo accendo il forno, la pinza amperometrica della colonnina segna 6kw (l'ho lasciato per 2 minuti e poi ho spento).
Come mai???😭
(versione firmware THOR_07AS-V4.2.13-20230714)
Those t-shirt change faster than the car :D
Hi, thanks for your videos.
The EC charger works without wifi? This have Bluetooth too?
I need to install the charger in a parking with no internet.
Regards.
Are you happy with the charger? Is it any good?
Yes. The charger is great. The only downside is for Teslas. There is no unlock button on the handle and I have to unlock the port from my phone or the car.
Alright thanks! I've ordered mine yesterday so wish me luck :D
Hi, how does PV linkage work? Also load balancing, did it happen to shut down your fuzes?
I was unable to test the PV linkage.
I need to get more sensors for 3 phase system. My main fuses are 63A and the one going to the charger is 50A so no issues there.
Thank you for your video, did you use 1 phase 7kw? Why 3 phases?
@@komjazz I have only one phase but it is splited on three conductors. No idea why I don't have 3phase input. So that's why I use single phase charger. In order to use pv linkage I have to monitor those three conductors.
Hi, thank you for your reply, i have SPF5000 like yours, would love to see how it works. So little information on the internet now. 🙏
Can you limit the %charging (ex. limit to 80%) from the growatt app?
No, the limit has to be set on the car.
Good morning, Sir,
I am contacting you because I am really lost in the commissioning of a Growatt Thor 22 as-p...
I am an engineer in Belgium and I have a small renewable energy company! I have no answer from the Growatt technical department. I have already spent hours on ShinePhone and ShineTools but I cannot add and make the commissioning of this E-V Charger!
LinkdIn is my last hope to contact Growatt and try to get help... I hope you can help me or direct me to someone who can help me.
In advance I would like to thank you.
Sincerely yours.