NEW MILWAUKEE M18 FUEL OSCILLATING MULTI TOOL (Most Powerful Ever Made)
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- NEW MILWAUKEE M18 FUEL OSCILLATING MULTI TOOL (Most Powerful Ever Made) We show the #verycoolgang the brand new Milwaukee M18 FUEL oscillating multi tool which happens to be the most powerful oscillating multi tool ever made! We unbox and setup the new M18 FUEL multi tool from Milwaukee that also comes with a OPEN-LOK™ 1-3/8" HCS WOOD BLADE (49-25-1101), a Multi-Tool Sanding Pad (48-90-2000) with multiple grit triangle sandpaper pads and test it though a range of different materials to push this multi tool to its limits. Let us know your thoughts on this new Milwaukee M18 FUEL Oscillating Multi Tool (2836-20) down in the comments section below and what are your experiences with oscillating multi tools as well.
#MilwaukeeTool #NothingButHeavyDuty
MILWAUKEE M12 FUEL CORDLESS OSCILLATING MULTI-TOOL (2526-20) : shrsl.com/2njg4
MERCH : vcgconstruction.com/store - แนวปฏิบัติและการใช้ชีวิต
I recently got one and used it on a job in my house. It was a very complicated job. It did it big time, I'm seriously impressed by the quality and versatility of the tool.
I have the older one, the 2626-20, which I have been using mostly to cut in Caddy Rings (MPLS). Over the past couple of days, I've cut in about 30 of them for a cabling project, and I have loved cutting them in with this tool. The space is already finished and carpeted (right, let's call in the network guy after we are finished the space. We seem to always be the last one they call!), so I also bring around my M18 briefcase vacuum so that I can clean up after each cut. What a great, time saving combo! I do need to remember to grab my CP3.0 batteries from my basement, I keep them for my router which I don't carry in my van, but would be nice to shave a little weight off of the oscillating tool.
Got mine yesterday and cut some holes in plaster and lath for electrical outlets (used a grout blade, followed up with wood blade). Super clean, effortless, and FAST cuts. And the auto speed feature seems pretty great!
Yes please do a 12 vs 18 i would like to know before i buy one
Milwaukee same company as dirt devil and hart from walmart. TTI industries
Agree on a comparison of the Fuel series M12 vs M18. I like the lighter weight of the M12 series, however, I use the multitool for a mix of light and heavy work. I am between both of them at the moment...
@@ashtonguillory2179 at least it’s made in Taiwan and not China
@@ashtonguillory2179 Doesn't mean it's the same parts.
I bought the 12v it's pretty good... great for tight spots. I love the built in light.
Just searched for a Milwaukee multitool review and this is posted minutes after hitting search. Heading out to get it now
Iv used makita, mil, dewalt. And fein. Dewalt is nice. But the blade get a little more flimsy cuz of the quick lock mechanical feature. Milwaukee you got to use the lever, then unscrew it, then tighten it then put lever down. Dewalt you only have to squeeze replace and release. Real easy. Fein is like that too. And they vibrate the least out of all the brands. Other brands can't figure out how to reduce vibration in the tool. Anyways. Makita nice to with a quick lock kinda like fein tool. But it's too damn large. The body is like humongous. Milwaukee also got the double squeeze battery release. I'd much rather only need a thumb to press and release it but just my thoughts on it. Iv used my mil tools alot don't get me wrong. I watched hella reviews about the tools before I bought. But not until I owned them did I see I wasn't fond of the oscillater. It does come with an extra adapter for certain blades Wich is cool but also a curse cuz you have to keep and and store it.
1000% smashed the like button and want to see the side by side of both m12/18, & m12/18 fuel to see the improvements
I just bought the PackOut Vacuum and now this tool looks like a perfect Christmas gift to me.
I have the M18 Fuel and I like the auto feature especially for scraping its slows down while clearing debris saving battery and lowering vibration. I seem to use it the most often. Works well in the other modes as well. I really like the M18 Fuel.
Thanks for sharing
Hey Vince. After one of your older videos about the Skil 12v Multi-tool, I gotta say, that tool has been one of my faves. I picked up the M12 FUEL Multi-tool over the holidays and even though they both offer a keyless change, I prefer the Skil.
Wow....it handled the steel alot easier than I expected. I am pretty sure the 11th setting is Auto. The quick change is alot easier than grabbing an allen key, but I have to give props to the yellow guys, their blade change system is pretty slick.
I feel like they should have included that Auto setting on the M12 Fuel. Pretty Awesome!
M12 vs M18 Head To Head!!!
Just finished the video and was not expecting it to cut through .5 in steel, I'm putting it on the buy list. Thanks VCG!!
I got one today and its amazing how clean it cuts with no vibration in the hand
I've been running the m18 since last week. Much better tool than before. The auto is great. It has more power than my corded Fein tool. Almost no vibration on your end but has power to spare.
Purchased purchased 12 fuel oscillating saw now I have to get the 18 v 😍
That is sweet. Damn straight. I used my son's corded bostitch that didn't cut that fast and the wood blade wasn't as fast. It seems auto is charge saver.
The 12v is very nice as well..... fits into tighter spots. Great for handymen and plumbers.
I just bought the M12 Fuel Multi and I have the non-Fuel M18 version I've been using for a few years. I also have a Rockwell Sonicrafter that I've been planning to give to my daughter. I love that Automatic feature and I may have to get one of these.
Vince I love your videos and everything the VCG does every day - a tip for you - you should always move the blade back and forth when you're cutting through nails, it distributes the stress and heat across the teeth. It's a SAW, it helps when you saw with it. Same goes for the steel.
Perfect, I'm going to use this tool to line up my beard while cutting trim
Vince. Really gonna need to see the m12 vs m18 fuel on this. Was about to pick up the m12 version but now I'm not sure. Side x side comparison with your professional opinion would be another great help. Thanks for all you do.
Already making my 2021 black friday list 📃
I've had the Milwaukee M12 Oscillating Tool for a while now.
As a licensed plumber (California) it comes in sooo handy, ESPECIALLY when I have to put my carpentry skills in action.
I can really see how the M18 version takes it to another level.
Thanks for the review!
Finally. Ive been waiting for this to hit the market
Great video as usual! I really like the magnetic and as well. The skil 12 V oscillating tool also has a magnetic end. Would be great to see a versus video between the 12 V Milwaukee and the 12 V skil.
Yeah, solid overview! I am really happy w/ mine 🔥
I have a gen 3 multi tool, but it is one of my favorite tools. You dont realize how often it comes in handy unless you have one. Buuut and its a big ol BUT, this new one looks pretty darn sweet.
Thank you for the detailed video on the new multi-tool. I hope to talk to Santa to bring me one.
That multi tool is a beast. Nice job Vince! 👍
Oh, the little magnets at the tool interface is a nice idea
I’m thoroughly amazed about the blade still having all its teeth after going through that steel!
Thanks for the video Vince I thought I needed a Allen key I wasn’t pushing the release far enough
Cant find my dremel so i ordered this👍 its a must have. Easy way to remove mortar from between woodlook floor planks when you use leveling clips👍
Auto is a great feature...
It enables you to start your plunge cut slow, then automatically ramps up to finish...👌
thanks for the review. I was thinking I needed to buy a few different items but this looks like it will do the job for my quick remodel.
Seriously this is the super man of oscillating multi tool💪💪
I am from Australia and we love Milwaukee. Totally buying this beast tommorrow. Thanks for the review mate
I JUST ORDERED THAT BEAST! THANKS FOR THE REVIEW!!!
I like it! I’ll be definitely picking one up !
I have the m12, ive been dying to learn the differences between it and the m18, i assume the runtime on the same amp hour batteries is increased 40ish percent and possibly more torque so you can push harder while plunging.
I love my m12 though, considering getting a few m18 tools like a band saw, circular saw, drill, vacuum, and the tripod light.
Auto likely saves the charge of the battery and helps you better control the re penetration of the material. T noticed on 10 when you were going fast it slipped off a few times.
Forth thanks Vince for being so cool and bringing us deals your deticated to bring us good deals
Well there ya go....I was going to buy the M12 but after seeing this....me gots to get the new M18!
Great vid Vince...THANKS!!
It does cut very well
I like the Auto feature. It will definitely take some getting use to, but I’m sure it will help batteries last longer once you figure it out.
Just bought this and I'm excited 😆.
Id have to admit if they’d offer more kits with the packouts, Id upgrade/ expand my tools more frequently. I know this because Ive purchased three drill/impact driver/packout kits just for the packout case and spare batteries. The drill & impact drivers are on the shelf still in bags for backup’s. I procrastinate every time I buy a bare tool because I know Ill have to find a case to stow the tool and I hate bags and blow molded cases take up to much room.
The improvement it needs, as you said... offered with pack out case kit!
Nice thx for sharing! 😊
Thxs VCG let’s have a shootout M12 vs M18 oscillating tool’s so I can buy one...
I'm not sure which one to get.. I may not use it often as I'm not in the construction business but I have some repairs to make
@@MichaelBlast I'm in the same situation.
Someone else tested both. And the m12 smoked the 18. With less vibration
@@sylvana393 thought that was a M12 fuel vs the old m18?
@@satnamsingh7636 might’ve been. If so the new m18 should do better.
Awesome tool, just had my employer order one for me for a specific mod I do.
Wow, that's pretty awesome.
That’s actually quite impressive cutting that steel
I was definitely impressed when it got through!
That auto is nice can't wait to get my hands on it
Brilliant demo as always Vince . Cheers Buddy .
I’ve just gone out and bought one 👌👌👌👌
Hi Vince,
The new milwaukee oscillating tool looks very nice. The Auto feature is interesting. Like the large LED light in the front. I differently need to feel the low vibration.
Now, the two things i wish milwaukee did change.
1. A flat bottom (not angle). Just like the (m12). I know you don't care for it but it's very handy to stand it up right on a lot projects
2. The quick blade should had a better design. Losing that bottom screw section will be very frustrating. They should had designed it like the DeWalt oscillating tool. I do like magnet feature but don't lose that screw.
Just my feed back.
Thanks for the video
That thing looks and seems really sweet. Especially since it goes to 11....givin us some Spinal Tap Vince!!! I love it 👍
Thanks Skolsaw you are da best!!
Mr Skolsaw- I don’t know if you got that FlexVolt Hammer drill with the free 6.0ah battery kit. The store in Rancho Cucamonga has 5 in stock now.
Finally! Good things come to those who wait...
BOUT TIME,
GO VINCE!
Next TTR with Dewalt 👍🏻
sold, thanks bro
Any time!
That was just fun ! Thanks for all your time and effort.
Glad you enjoyed it!
Shocked all the teeth were left after that 1/2” steel. Amazing
Bosch makes the best metal blade iv used.. milwaukee has some of the most expensive shit iv seen.
This thing is a BEAST
I just bought it online at the depot September 6, 2022 for 189.00 with a 5.0 battery. Yesterday Labor Day it listed at 229.00 no battery. I was happy I waited for a day to get what I wanted. I have all m18 fuel tools except for the full size saw-all which came with a fuel impact driver kit as a freebie
Excellent video Vince. I think I’ll hold onto my dewalt. The variable trigger and quick release blade change are too nice to give up.
I have the milwaukee gen 1 multi and I gotta say I prefer using my mates dewalt multi for those reasons.
Dewalts blade change is nice, but I'll say no thanks on the trigger. I accidentally turned on that DeWalt so many times just picking it up or changing cut orientation, almost nicking my hand or material. I will say the only con with dewalts blade change is that it's stiff as hell until it gets broken in. My dad, who is the DeWalt guy, bought it, and at 60 years old with possible beginning stages of arthritis, has a hell of a time working that lever. I ended up going with the m12. Same opm's as the m18 and the blade change is just about as fast as any competitor. Works for me.
I wonder what number it uses for each material it's cutting. Also I'm still rocking my first m18 and it works great. I don't see myself running out to get the new one for a lil bit more power magnet and a auto feature. Even though it's all nice that's for sure, but i hope the auto feature don't add any mechanical problems to the tool. Could you imagine it just going between the wrong different speeds and stuck on auto lol. I seen a friend's tool get stuck on the lowest speed setting on a dewalt..
I need one! so I can appreciate it more
Damn, I need this one. I bought the 2012 one that you got, now I want this one!
Love it, this is my next tool
I bought m18 fuel multi tool a week ago. Bare tool. It was a little high priced but I like it more than my regular m18. It needed an upgrade
@Sher John honestly it’s not that much difference it has more power and better light. But blade change is the same. But if my m18 wasn’t used up I woulda stuck with it.
just bought one. its a beast
We just got ours a few weeks ago. Came from a Dewalt corded version. You gotta give it to Dewalt when comes to oscillating tools, the trigger, toolless quick-change system is great! But this new M18 monster! This thing cuts through stuff like butter! Personally, I like the 'A' mode. We mainly use it for low voltage wiring stuff, paired with a Qbit blade to cut out 1 gang boxes. 'A' mode lets you start out slow and precise and then ramps up when needed. Great video as always, keep up the great work!
I think the auto mode is nice 👍 less vibration when you start a cut
I’m an electrician and I use multi tools for cutting pvc conduit that already has conductors in it
Man I already have the M12 Fuel oscillating tool. I couldn't help it I had to get I couldn't wait for the M18 to come out. Oh well I will pick up the M18 Oscillating tool as well.
m12 vs m18 lets go!
The auto sounds like it’s very responsive and works well. Good way to save some charge over time I would think
Your the man! I love the videos!
Yes definitely have a M12 vs M18 shootout
@VCG The 24v Kobalt has a magnetic blade retainer and a nice half turn pin removal making the blade changes super quick. Not as quite but worth a look.
Amazing tool .
I think the auto feature is great just for saving juice! I'll have to get one myself and put it to work to see if the auto setting has any advantages. It does seem that it might help decrease blade skipping when making precise plunge cuts into hard surfaces. Pork Chop Sammiches.
It does. I was cutting thick aluminum channel. And everytime I applied pressure it will increase and really start cutting. And battery was still fully charged after 5 cuts.
I have the regular m18 love it
Yes please do m12 comparison to m18 multi tool review
I really wish Milwaukee would make canvas pouches like the Klein tools pouches but with that fuel zipper. I love my Klein canvas pouches but if Milwaukee makes some I'll for sure stock up on them!
Got to have one . Like the auto
When 10 is not fast enough and you need a little extra, this one goes to 11! lol. That’s just awesome. I almost want to buy it just for that. If only it came in green...
Milwaukee-green, nah dog red's tremendous.
I vote for you guys to do a side by side comparison with m12 and m18
Awesomeness
I have several corded distributed around in various kit right? However my little M12 may not be the most powerful, but it’s so easy to haul and use in quick work, tight in and ladder work!
Having said that, this bigger M18 Fuel will probably end up with me for difficult to set up for areas where projects get real (and cord management is a pain).
Yes, compare the 12/18 fuels. Do a full shootout with them!
milwaukee was in beast mode 💪 one thing i would of liked to have seen in the review was the noise level coming from the tool compared to the gen 1 or the M12 model. We all know these tools are super noisy. The 5.0 or 4.0 amp would be the perfect size battery for this tool
Thank for your video very helpful 👍🏻👍🏻
Glad it was helpful!
I have the regular m18 and I used it often and it does great but this thing is such a beauty I’m crying. I have a m18 fuel hackzall that makes the job easier but sometimes I need to cut a 2x4 on a shower that’s on the floor and this would safe me that hassle of burning my blades easily.. 😭
You have me sold on this
I have a Milwaukee multi tool. It’s not fuel or brushless and i have to say my tool is badass. I cant imagine that one. I want it
After sitting through all those commercials and waiting to the end I was surprised there was no mention of a suggested retail price.
If anyone is serious about the best oscillating tool, which I found a few months ago, it is the new Festool OSC 18. Why? Because of the dust control feature. They have done a great job of designing a shroud that hooks to to the tool’s collar and rotates. I’ve had a few fine multimaster corded tools but I was sick of all the dust and was glad Festool came out with a solution.
These oscillating tools by their very nature generate a lot of cutting debris, which is so evident in this video. If Milwaukee wants to get serious when they come out with a new variation they have to address the possibility that the owner wants to have this dust collected before floating around in someone’s home or into their lungs.
The Festool OSC 18 is a bit pricey - I bought the whole kit for around $800 that’s with the two Bluetooth batteries, charger, dust collector, plunge base for making plunge cuts, in a systainer case. I bought it because I need it to do a large job of removing a lot of grout and it’s great having no dust flying around and the depth stop prevents me from cutting too deep into the grout line.
The plunge cutting base utilizes magnets to keep the blade straight to prevent vibration when making a plunge cut. Just as you mentioned the use of magnets in this Milwaukee tool, I think these magnets could be more utilized in innovative ways in power tools.
In an unrelated question, I just bought the two new Milwaukee Fuel vacuums the upright (0940-20) and the Packout version. The upright I loved at first especially because of the powered brush head (it is strong!) but there’s some quirks about it- like if you have the nozzle on if you’re running it at high speed the filter light always comes on, on the slower setting it does not come on. I assume because of the restricted airflow of the nozzle it’s sensing that it’s a clogged filter. Also the filter and the cyclone housing I had to pull off a few times to clean after just a basic vacuuming job. I’d like to see a review of that one to see what you think.
I just got the M12 fuel version for $119 with a free 2.0 battery. I don’t regret it.
cant wait to own mine !
love it
Been waiting a long time for the fuel one. 🤙🤙
I think this is the best oscillating tool