00:47 I'm getting ready to try this method and it just dawned on me it might not work with eutectic 63/37 solder? Is this an accurate assumption, do I have to use 60/40 solder for this method???
@@jadeelectronics4343 Right the only thing I could worry about on some PCBs are the pads being lifted up. But so long as that does not happen I'm all for blasting the blobs with some heat :)
Wow, I don't know how to say this correctly, but you need to take a soldering class. If I was to solder like that my boss would fire me! Sorry for the bad comment.
This is just some really bad soldering techniques, there are some days that I hand solder over 100 SMD devices on printed circuit boards and they CANNOT look like the ones that are in this video.@@Irfan__
Did you apply flux beforehand?
Skill's here, but that smooth jazz ambiance makes it all.
Thank you Sir! What's the temperature setting that you use?
00:47 I'm getting ready to try this method and it just dawned on me it might not work with eutectic 63/37 solder?
Is this an accurate assumption, do I have to use 60/40 solder for this method???
Yes 60/40
what temperature did you have the iron set to?
Plugged in!!
Who is doing the piano on the music (nice video by the way)?
Nice one sir
Thanks
👍😍😍
😁😁😁... Bye bye fried chip... 😀.. Well at least wear some microscopic goggles..😀... What no goggles too?! ... You're the man! 😃👍
What did you use to clean?
Lighter Fluid
good method very important though is your solder iron must be the correct temperature to pull it off
Yes correct
@@jadeelectronics4343 Right the only thing I could worry about on some PCBs are the pads being lifted up. But so long as that does not happen I'm all for blasting the blobs with some heat :)
@MILEAGE ADJUSTMENT UK The temp that melts solder!
Excellent video my friend. Thanks for sharing. May I ask what product did you use in the cotton swab to clean the motherboard?
isopropyl alcohol
@@kevdel ^ this
5:10 all I hear is dankpods music everywhere I go
is it necessary to clean the surface?
Yes sir
Hi sir
What kind of chemical do you use Cotton bond?
Special stuff!
What's that special stuff?
What is the Name of the liquid you used?
Lighter Fluid
@@jadeelectronics4343 what is the purpose of that ??and what watss the soldering iron?
To clean the surface . Soldering 60 watts
IC said the blind man.
Wow, I don't know how to say this correctly, but you need to take a soldering class. If I was to solder like that my boss would fire me! Sorry for the bad comment.
💀
This is just some really bad soldering techniques, there are some days that I hand solder over 100 SMD devices on printed circuit boards and they CANNOT look like the ones that are in this video.@@Irfan__
For personal at home use this enough.
Not for me@@boxsesyt7617
Nakaka intindi po ba kayo ng tagalog sir ?
siguro. haha
Terrible technique