How to Fabricate and Weld in a Patch Panel. Step by Step Process.
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2025
- Today we are repairing the front fender for the 1936 Chevy Truck. We will build a complicated patch panel using simple tools, then we show how to weld it into the fender
Here is a link to part 1 , which shows the metal shaping in more detail: • Metal Shaping. How-To ...
If you found this video useful and would like to help support the channel, please check us out on Patreon.
/ carterautorestyling
Or you can send us a donation via Paypal:
www.paypal.com...
#Carterautorestyling #dentrepair #migwelding #classictruck #classiccar #restomod #restoration #customcars #hotrods #classiccars #cars #fabrication #metalworking #automobilererpairshops #bodywork #autobody #autobodyrepair #rustrepair #car #classiccars #hotrod #behindthescenes #sheetmetal #custom #metalshaping #fabricating #classiccar #metalfabricator #metalfab #trucks #gmc #chevy #tigwelding #beadroller #ChickenTruck #kustom #bondo #bodyfiller
This Man is impressive. I did auto body repair and restoration for over 20 years starting in the early 80s. Back then you would have to fabricate lots of parts because replacement panels/pieces were not readily available. You Sir are a true master of the art.
He sure is. He has been my hairstylist for a while.
Carter hair re styling. I see you fit 4 vehicles in your boutique.
Thank you!
I had some crackhead (bonafide) ding up a miata with a cinder block . The sheet metal used everywhere other than the aluminum hood is very hard/brittle it prefers to crack rather than being malleable.
I remember the '80s... Lots of "Cave and Pave", in those days... Especially under B.C. Govt. Insurance (they didn't want to pay for much of anything)... 😒😒😒
His skill level is next to none! He has forgot more about metal working than most will ever know. He is a delight to watch!
Great Tip: Mark new panel layout before cutting half the fender. As a newbie, I love these great tips.
I like how the maestro of metal says he doesn't need to "get it perfect" and then proceeds to just blow your freaking mind.
I watch a lot of different people doing this type of work on TH-cam. Your understanding of how metal reacts to heat amazes me. Your work is on par with Cornfield Customs and you do it all by hand. It is nice to see craftsmanship and someone who truly cares about the quality of their work. I watch another TH-camr from Canada (won't mention his name) who basically fixes everything with body filler. I aspire to work metal the way you do. To me, it is a matter of personal pride. Kudos to you Kyle.
"Rad!" -Dad
I know who you mean and agree with you . As of one month ago I unfollowed him , got tired of his body filler classes .
The skill level of this man is hideously high. Thanks for sharing
Ah, the old days when your jacket had the appearance of being just of the hook, before you became a trend setter, fashion leader.and an icon of the workshop catwalk. Summed up perfectly in few words by Scott of CWM as sartorial elegance. I reckon though your jeans are about 15 squats away from becoming shorts. BTW great informative video as usual.
Congratulations, you are a restoration artist and since you like cats, you must also be a good person!
Damn, this kid is good. People would pay handsomely for that quality of work.
Having all the fancy tools is one thing, having the skill to do even basic metal work eludes the v.vast population, we love seeing alternative methods.
Thanx for explaining everything. I know nothing about metal working, welding, and cars, but with your help it all makes sense. I'm 71 today and remember when cars were so different. I am glad I happened upon your videos.
In the mid 60"s when I was in High School I worked for a Mechanic shop in a small town in Northern Calif. , the shop owner had a 36 chevy with a 292 six and a powerglide open drive line , it had dual carb manifold and split exhaust , it was his daily driver and our shop truck . Very nice work on that fender and it was great to see a 36 Chevy again .
That is an amazing repair to the fender. It looks flawless. Your repairs made sense after seeing all the cracks that were welded before. I'm looking forward to seeing you get the blue car on the road. She is a beauty.
My wife just walked in and asked what I was watching.....she said my jaw was totally dropped to my chest in awe of your amazing work. Blows me away seeing you work this repair.
Thanks much.... Im the guy with the 35 Master.... just trying to do the same edge repair as youve just done. Perfect! Glad to see someone loves these old Chevies
I must be one of the two cause I'd really like to see the old sedan on the road. Would be pretty cool to see it next to Scott's 37
Brother you gotta give yourself so much more credit!! Beautiful job..
Cats are always an integral part of precision bodywork.
Well played, Kyle.
I learned the same method of "tack every inch, grind, planish then weld end to end" from a very talented British coachbuilder/fabricator... but using oxy/acet. A few decades of doing it using the "weld a bit and let it cool method" sucked compared to the way you do it. So much less warping this way.
Now as a senior citizen (read that "Old Fart") I'm trying to learn this with TIG. Fun stuff, when you can learn by playing instead of at a 9-5 (or more) job.
Anyone who says you need to weld a bit and let it cool, with oxy/acet or tig hasn't been shown how do it properly or just won't learn. MIG is a whole different story.
As usual, Kyle.... nice work.
Thanks Joe! As my old boss used to say "I pay you to work, not to learn" I had to learn tig welding on my own time or be banished to mig welding for all eternity
@@CarterAutoRestyling Time well spent, obviously.
How are you doing these days Joe?
Your methods do produce winning results; we can't dispute that. I hope you have fun with this one too.
I love the time travel episode!!! I took the opportunity to buy some 28cent/gallon gas.. went to an all-original member Guess Who concert and took a couple of pot shots at Oswald from the grassy knoll. (I missed.. sorry) Can't wait for the next time travel episode. I know I'm all about the blue car... who's the other guy? Cheers from your loyal viewer.
Me thinks you set the dial too far back on the Way Back Machine Mr. Peabody!😆
@@glennnickerson8438 Artistic license...
You old timers sure know how to party! More time travel coming as soon as I get my flux capacitor back from the repair shop
I will continue to watch whatever you film. It's nice having a few projects especially when parts take time to find fund and show up.
Your "not too bad" looks pretty darn good to me 👍
I think that's partly Canadian modesty, but Kyle seems to be afflicted with a severe case.
This is craftsmanship on a level rarely seen today.
It's inspirational to be comforted knowing you use the same method and level of organization in your work area that I attempt to achieve and maintain.
the music is refreshing, I can almost see you pounding out a suit of armour for jousting knights..
Some artists work in oil, you work in metal and your work is amazing!
After losing his Bondo sponsorship for his preferred artistic medium, he is stuck with using lead. . .
I have to agree, amazing!!
I agree
Thanks very much!
Another beautiful repair from the Savage Saskatchewan Savant! I learn something every time. Looking forward to all of the upcoming projects! Cheers from the junkyard...
Thanks!
Two uploads in a couple of days , thank you Kyle quality content as always fella
5)- I love how perfectly smooth body work comes out when it's lead that's being used. This truck will be beautiful when done!
Thank you Mr. Carter for teaching us how to move forward on projects and encouraging us to work at our projects. Kind regards
Artist at work!
The "Fairy Dust" didn't work for you???🤣🤣🤣
I Love the work you do...
Keep it up...
💪💪💪
Yay, the highly anticipated follow up video. It did not disappoint. Flawless detail in the finished product.
Luckily I wear reading glasses when I'm watching videos, so when the camera went out of focus I just had to take my glasses off and the footage was perfectly in focus.
ha ha ha Good one!
Not perfect to you is perfect to most folk. Nice work man 👌
The explanation of how you see and do things is great I think I’m learning.
The cats are the.fur ball on the cake, so to speak. You are a dynamo body man. Thanks!
Thanks Kyle love the two videos in a week. I could watch you metal finish all day in real time so amazing, don’t be afraid to share more
You can tell how much you love doing this from the quality of your work mate !! Keep up the great work and thanks for your videos 🤙🤙🤙
love the cats bro. Do you ever just say f it. That's enough perfection for this piece of imperfection.
You are an artist
It's always a pleasure to watch things come together. Fine work and with simple tools. My Dad always said. Use it up, wear it out, make it do or do without. Thanks Kyle.
You are a great body man and what you do is a lost art.great job
Hi Kyle, Beautifully done. Roland
I love that old truck, your work is perfect to me, you say it's not, but it is.
Absolutely incredible as always!!! Mike at Cornfield customs welds in his patches the same way and it usually drives people crazy!
"...decent fitment..."
Man, i'd say SUPER
The Flower duet from the opera Lakmé, is also highly recommended welding music,, 💖🥰💖
Thank you for everything Kyle,, 👍🌟👍
Nice unexpected footage. Making it look easy.
you are a good teacher
Still down playing your work whem most of us wish we could do half as good work ... this was a great video showing lot of techniqe and tricks ... great vide Kyle ... and I'm the other guy that likes the 35 sedan ...
I would have been proud of myself if I had done the filler patch!😆 Thank you for showing us mere mortals how a true craftsman does things!
Thanks Kyle....Great Fathers Day Treat.
Truly an art what you do with metal, as always a great job! Sir Allen and Lady Poe don't forget to with your "Dad" Kyle Happy Father's Day!
As well as the skill on display, I love that copyright "forces" the classical sound track. Win/win as far as I'm concerned.
Great video Kyle, my first laugh of the week and really impressed with your work and commentary, always a nice break from mundanity 👍
Love that old truck
Boy Kyle, pretty nice work, for just giving it a quick job!
Two videos in three days, most impressive, thank you! I did get a little dizzy when you showed all the angles you check. However I did recover and was able to follow along. Great job as usual. Cheers! 😎👍🛻🏁🏁
I'll be the third person that cares. Cause that blue car is awesome 👍 and I can't wait to see it running and driving.
The Chev towncar brings the channel joy, keep on showing her rebuild.
The repair turned out great! So bad this video wasn’t around when I was working on my 31 Ford coupe fenders. I’m excited about all the projects. Something different. Never know what you’re gonna put out but I’m excited anyway they’re all gonna be great when you get them finished, they’re great. They are shoot. I wish I had one in my yard for a yard art.
May I just express my utmost respect about your work!
I've watched a bunch of your videos before attempting a repair like this myself - and even together with someone who had alot more experience in sheet metal than myself, it was a BUNCH of hard labor!
Now that I've done it once, I'm glad if I never have to do it again, but my hats off to you for doing this out of free will in your leisure time!
Count me in for not caring about the blue car. 😂 Seriously, beautiful work on the fender patch.
I care about the car but my love is in the truck, and it sounds like a great plan for it with the T-5, I'm running one in my 47 Ford truck and they are a great addition to any project, beautiful work as always Kyle 👏
Interesting quality metal work and love the vintage trucks..
Well Kyle that was another outstanding video chock full of stuff. The cats were on top of their game today with all of the antics, the way they carry on. It was almost too much cat content. (just kidding). Anyway, I enjoy your shows. Thanks.
You do beautiful work.
Superb fabrication and metal working , excellent tig and lead work . ❤ From the UK .
I enjoy seeing progress on all of your vehicles. Thanks for taking the time to share them with us.
Looking forward to seeing more metal magic. Cheers ❤️👍✌️😎
Been watching your vids for a couple years now and always looking for your next one. :)
You do such great work and do it in a small shop showing others that we don't need a big fancy shop with the newest tools to do what we like with our own hands. One of the things i've learned over the years is that a huge percentage of people who say "I wish I could do that" are only lacking two things...determination and patience. when I started out I had no tools and no place to use them. I started gathering tools at garage sales and when I could afford it I'd buy a tool I needed. Turned my horses birthing stall into a small shop (about 12' x 17') by laying down wood pallets level with each other and buying used plywood screwing to the pallets underneath for a floor. That first street rod won a 1st place trophy at the Goodguys car show "Budweiser's Best Home-built corral" in Puyallup, WA years ago, taking 5 years to build. All I had was an old Arc welder.
I always tell the young guys to get off their ass and stop telling yourself you can't do it, get off the dope and booze and go for it...stop listening to others who say you can't do it..and if your wife or girlfriend says no then find a new one... don't be a pussy. Now (Thank the good Lord) i have a huge shop and a Hobart welder like Kyles and have built many many many projects with it...and made some of my own tools etc. So Kyle thanks again for showing your humble skills!!!! And thank God every day!
Edit: By "humble" I mean you do excellent work better than most and are a humble example. peace
I just realized somebody will probably think "how did he keep from burning his wood floor and shop down?" Good question because back then I didn't know about fiberglass blankets that protect from weld spatter/sparks...I must have been real lucky or used sheets of plastic laminate because laminate (formica) is "almost" fireproof...almost haha. It takes a very hot fire to burn it (I was a cabinet maker/countertop maker back then). Hey Kyle, I think I've burned more shirts up than you!!! hahahaha
Very well said! Thanks for watching!
You are the “JEDI” master. When I grow up I want to be just like you. I’m 66 is that to young?
Yes Sir!!!
Excellent work!!! Now I'm going to go out to my shop and do it the wrong way while helping keep Bondo in business.
Great body work Hoss.
You are like me. I do things my way and don't give a care what others think.
Nice work Kyle! I really enjoy learning how to perform these repairs and other tasks. Your attention to detail is impressive. Cheers!
Get them on the road woooooo! looking forward to more thanks for the vid Kyle
Great job Kyle👌perfect made replacment panel(with just few basic tools),and excellent final result.it looks like you're coming from the really old days,when who did this job HAD to be good,and knowing the dill.👌👍
Always amazed at what some people can do with sheet metal, a real art. Nice work.
❤ Absolutely Magical to see your Magic !!! And those Radbag lazy Cats !!! 😉🙃😎 NZ
you are a great metal man
Very nice work don't cut your self short
Lots going on in the garage!!! Thanks for sharing Kyle!
Hey Kyle, good video it’s good to see you getting back on the truck and finally getting that patch finished up, and may I say a beautiful job on it. I love how you take your time and work it so it looks like it’s factory. Can’t wait for your next video ok. Later
Very well done fantastic work. For us mear mortals its not a job many of us can do. Im a welder fabricator by trade and ive engineered a lot of stuff but it take special skills to get to this flawless degree of metal working
Great work and excellent teaching!
Beautiful work once again, Kyle!
Your so talented Kyle! Fun to watch
Hey ,I love watching you work. I get a kick out of the way you do and explain what you are doing. I wish we were neighbors..you Canadians do awesome work. Thank you for sharing
Watching you work is always a pleasure; it's even better that my shed looks just like yours! (without the cats lol) I have a tig welder too, but at 75 yrs old, it sort of frightens me a bit (read a lot) and I haven't used it yet. I have watched videos etc., etc., but it just sort of confuses me a bit, thanks to the after effects of a stroke. I have to start one day I guess.🧐😕🙄👴
I agree with @JimsIfitaintbrokefixit, great Fathers Day Treat!! Thank you for sharing Kyle!!
That was an amazing job and an awemazing video!
Hello Po Hello Allen and you too Carter
Another great video.
Great job on the fender repair. Enjoying the cat interludes too!
a few more years at it you will get good at this , nice job
Nice video cheers from the UK 🇬🇧
You Brits probably understand his Canadian pretty well, eh?
I care about the blue car! Love your work fella .😊