all these negative comments geez. not everyone is a charistmatic speaker. sorry that yall are used to politicians who lie constantly to you. i care about facts and substance and hes EXCELLENT! keep it up josh, thanks for bringing us great produxts and great informational videos
A sales person should speak better than this guy.. nobody is asking for a politician but just someone who doesn't put people to sleep talking about his products
Josh has gotten much better as these have continued. Good for him for doing the hard thing and just learning and getting better. Lesser disciplined people would just give up instead of adapting.
Or with it set to 45, just flick your thumb down for fire then back up for safe. As a righty, I kinda prefer the one side 45 over any Ambi, just cause it’s not absolutely necessary
Great selector, 45 degree doesn't always work with geissele triggers. I'm not sure if that is a geissele or Radian tolerance issue, only ran into it once in my builds so not a rampant issue
The feel of a good safety after having a sharp square metal one that cut my finger is a nice little upgrade you wouldn't expect to be worth much, but I love my Radian. I went with twin mediums, I found the tapered ones to be kinda meh.
that SOTARD Clown is always creating drama to draw attention to himself, he has been known to break stuff just to do videos. Its time he is sued into oblivion!
First thing you'll loose is the little tool so forget ever removing it later. I've installed 3 with no problems but one I've flipped it the 180 degrees and it doesn't work at all, then flipped again, sort of works, again and again, and again. And, IMO, the levers are too thick and too short. oh, and be prepared to loose the MINUSCULE little spring loaded pins for the levers. They'll stick to your fingers and go flying everywhere instead of just dropping into the little hole.
I used to love these safety’s PSA They will not consistently work with some triggers. I have had issues with not allowing my AR’s to fire with Geissele SSAX style trigger either X style triggers SSAEX or SSAX triggers. I’ve read there are many people having the same concern
I have a bcm with ssa-e with around 6k, and a super duty with ssa-e x bow with just shy of 3k rounds and have dozens of builds for clients with some variation of ssa-e /x and have not experienced this phenomenon, nor have I gotten any reports from clients complaining of same. Not sure what is causing your issue or what your sample size is, but I'd look into that.
My latest build has an SSAE X along with the talon safety selector. No problems here. I've never heard or seen the issue you mentioned with running these two products together. Perhaps you messed up somewhere during assembly
@@Jody2gunz well installed correctly has happened on multiple lowers….. I’ve herd others with same concern only with X style I run the Talon on my SSA’s and AE’s with no issues
all these negative comments geez.
not everyone is a charistmatic speaker. sorry that yall are used to politicians who lie constantly to you.
i care about facts and substance and hes EXCELLENT! keep it up josh, thanks for bringing us great produxts and great informational videos
Well said. 👍🏻
A sales person should speak better than this guy.. nobody is asking for a politician but just someone who doesn't put people to sleep talking about his products
@@d8ed78end product user ends up paying the salaries of those slick talking salesmen.
Josh has gotten much better as these have continued. Good for him for doing the hard thing and just learning and getting better. Lesser disciplined people would just give up instead of adapting.
Great upgrade made with good materials on all the parts…love mine. Keep up the good work, Radian. 👍🏻
Love your instructional videos! Thank you.
I’ve have used these an all my builds over the last few years, love the products from Radian, such a nice selector switch, love the 45 setup!
I love being able to go off safe with my thumb and on safe with my index finger. Great upgrade!
Or with it set to 45, just flick your thumb down for fire then back up for safe. As a righty, I kinda prefer the one side 45 over any Ambi, just cause it’s not absolutely necessary
I love the ones that I have!
Can't really support your Rumble channel if you never post anything there.
Great selector, 45 degree doesn't always work with geissele triggers. I'm not sure if that is a geissele or Radian tolerance issue, only ran into it once in my builds so not a rampant issue
The feel of a good safety after having a sharp square metal one that cut my finger is a nice little upgrade you wouldn't expect to be worth much, but I love my Radian. I went with twin mediums, I found the tapered ones to be kinda meh.
can anyone tell me if split pins (they act like roll pins) r ok to use where rolls pins are? (any location)
Funny this comes out right after SOTAR showed issues with it.
What issues did they find?
that SOTARD Clown is always creating drama to draw attention to himself, he has been known to break stuff just to do videos. Its time he is sued into oblivion!
Josh’s face in the beginning “this sh** again here we go”🤣
Last videoiwas hoping the had a med vac standing by for Josh. God bless man.
Pws buffer?
I might add that be careful not to launch the detent and spring for the levers. Wear goggles. Josh was clearly better at that than I
First thing you'll loose is the little tool so forget ever removing it later. I've installed 3 with no problems but one I've flipped it the 180 degrees and it doesn't work at all, then flipped again, sort of works, again and again, and again. And, IMO, the levers are too thick and too short. oh, and be prepared to loose the MINUSCULE little spring loaded pins for the levers. They'll stick to your fingers and go flying everywhere instead of just dropping into the little hole.
I used to love these safety’s PSA They will not consistently work with some triggers. I have had issues with not allowing my AR’s to fire with Geissele SSAX style trigger either X style triggers SSAEX or SSAX triggers. I’ve read there are many people having the same concern
I have a bcm with ssa-e with around 6k, and a super duty with ssa-e x bow with just shy of 3k rounds and have dozens of builds for clients with some variation of ssa-e /x and have not experienced this phenomenon, nor have I gotten any reports from clients complaining of same. Not sure what is causing your issue or what your sample size is, but I'd look into that.
My latest build has an SSAE X along with the talon safety selector. No problems here. I've never heard or seen the issue you mentioned with running these two products together. Perhaps you messed up somewhere during assembly
@@Jody2gunz well installed correctly has happened on multiple lowers….. I’ve herd others with same concern only with X style I run the Talon on my SSA’s and AE’s with no issues
Never have this guy in the channel again. It's like listening to a rock having a conversation with a 2x4.
He's gotten better but needs to stop saying "um" and "huh".