How To Access/Get to Your Rear Spare Wheel On a Pajero
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Welcome to the first Hot Tip Tuesday video! In this episode, I will show you how to access/get to your spare wheel/tyre of your Mitsubishi Pajero in case you might not know! Make sure to be quick with those spare wheel changes instead of reading through the manual first :)
Follow my socials:
Facebook: / budget4x4life
Instagram: / budget4x4life
#pajerospare #howto
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/m...
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/q...
Good stuff mate. 2-4 min videos are excellent, especially for quick tips and tricks for Pajero owners. Keep it up 🤙
That's it mate!💯😄 Cheers!
Thanks for good videos! One of my bolts do not come out..they were both pretty hard to loosen, but the upper bolt went out fine..the lower bolt just spin after it got loose, and now it is not possible to tighten it either..what is it on «on the other slde»? A nut or other device holding the bolt which might have been broken??
Just give it a wiggle to come out. Might just be a little stuck because of all the years. Grab a hammer 😄
About to buy lefting tools after buying used Pajero short! , and this video saves me $150 when I knew this little secret place 😂.
Thank you 🙏
Haha no worries 🤣
Does anyone know the thread size for those bolts? Previous owners cross threaded one and I want to clean it up.
Read my mind! I was going to TH-cam this today before our trip up north. Awesome vid and great idea!
😄😄😄 awesome! Glad I got it out before then 💯 Enjoy your trip 🙂
I just searched n u came out 1st
Good stuff 😃
Hi mate, thanks for the video. Was wondering, how tight should the bolts be? I feel they don’t fit directly after closing the cover, I have to wiggle it a bit and hold the cover in a specific position for the bolt to tighten.
Hey matey when you put the bolts back you should wiggle it in spot and push it hard up against the thread first. Then tighten. It should be tightened till it cannot be turn any more 😃
Thanks brother
🤙🏼🤙🏼
Tq brother ❤❤❤
Hi thanks for the vidéos. Where did you buy the table? Link please 🙏
There is a video on my channel about it if you want a more in depth look😊💯
www.kaon.com.au/?
👍
🙌🏼💯
Big thanks to you brother ❤
You're welcome 🙌🏼
Hello, Do you know how to remove the plastic housing for the spare tire cover off a 2001 Montero Limited
No sorry
Mooi man!!
Haha net so 😄💯
❤❤❤❤❤
Thank you
No worries 💯🙂