I liked the accent, but could've been better planned with the LED's on the room side and knock-out lights on the wall side and taking advantage of textures of the wall. I'm not sure the epoxy was even needed. Materials of detailed fashion can set the led need.
The epoxy is OK, and an idea to be easier to clean/vacuum dust & Debris, however the "led" strips should NOT have been inside the epoxy. The "led's" should have been attached to the underside of steps against the "dried" epoxy to still allow the light to make epoxy glow colors & "allow" for fix/replace burnt out leds on both sides of steps. The raised tread look is a good idea & allows them to "appear as floating" & not anchored to wall, elevating the design to a nicer look. Alot of the under stair work could have all been done before installing the panels .
LED strip lights have an average lifespan of 30,000 to 50,000 hours. Assuming 5 hours of use per day, that's over 16 years on the low end. I don't think it's going to be an issue.
You should have added an aluminum chanel for a heat sink for your LEDs if your going to that muchwork .It will make your lights last 5 times longer and its dirt chesp.
Светодиоды выделяют тепло. На правильных изделиях их крепят к теплоотводящим поверхностям. Типа аллюминиевых профилей. В данном случае светодиоды теплоизолировали. Они будут сильно греться. Как результат - быстрая деградация. Возможно, в течении года. Как менять ленту?
Great build not just the stairs but the shower as well. As some have pointed out replacing LED strip will require a lot of unnecessary work if they were installed a different way. Definitely liked the pet bed under the stairs and little cupboard. Great video.
I'm all for adhesives but there's a term. Less is more. Copious amounts of adhesive don't cure properly. The landing at the bottom, well, I'm not sure what happened there?Was the end result good looking, sure.
j'aime 💛beaucoup ce nouveau format. merci. +1 like Edit: mais je préfères le format en plein écran que le format short, je suis sur PC / MSI GT73VR 7RE-486FR Titan SLI 4K /Edit
Hello my friend, your work is more than wonderful. Your high-level work skills and techniques have made me very enthusiastic about entering this field and gaining skills from you personally. I only need the work tools and start immediately. I wish you success, my friend. ❤
Thank you for the update, TechFreeze..!! Truly a work of art. The second video showing the installation of a curbless shower system is amazing as well.
Love it and great video. My only thing would be to hide the led from top by some defuse strip vs encased in epoxy. Those go bad that is entire stair replacement
I can definitely lift some ideas from this. Minor thought, but why not insulate under the landing and respective treads too?! Not a fan of the handrail/bracket choice
Hello Hello just like start with I first time watcher of this and must say I like your work definitely got a new subscriber in me but one thing I must say is I really enjoyed the little fire hydrants you paint on walls underneath steps for dog area you get 👍👍👍 from me plus thanks an keep making great content
I would never use drywall in the shower. Even the blue or green moisture resistant. Cement board or Schlueter foam board only. The drywall is only for the rest of the bathroom.
Not a fan of the LED look. Who really wants to be blinded when going up and down stairs? Then you also made it impossible for the LED to be replaced when the diodes start burning out without redoing the project. The LED really should be an accent for the stairs, so it's best to have the strips run along the nose of each tread. That way they're pointing down and not directly in the eyes. They're easily accessible and replaceable.
This is a joke. No one builds stairs like this because you’d never be able to tear it out without ruining everything. Fun fact: those LED strips aren’t good forever. This was a waste of $3000.
Конструкция совершенно не продумана. Видно, что собирают первый раз. Материалы нехорошие использовали. Старая лестница была лучше. Это видно по демонтажу.
Watching screws being screwed, watching holes being drilled, watching saws sawing and cables being installed is the most boring entertainment on TH-cam nowadays. 😊
Absolutely horrendous. No idea where to start on this abomination. Poor craftsmanship and work practices but worst of all truly awful planning and design. All flash and cash for this trash.
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
It always gets me how so much useful lumber is destroyed.
Some people have more money then brains this clip proves it
Only one question. What you gonna do when one of your LED in stair burn out? Deconstruct whole stair? This is not repairable...
My very first thought 😂
I liked the accent, but could've been better planned with the LED's on the room side and knock-out lights on the wall side and taking advantage of textures of the wall.
I'm not sure the epoxy was even needed. Materials of detailed fashion can set the led need.
lol my first thought to
The epoxy is OK, and an idea to be easier to clean/vacuum dust & Debris, however the "led" strips should NOT have been inside the epoxy. The "led's" should have been attached to the underside of steps against the "dried" epoxy to still allow the light to make epoxy glow colors & "allow" for fix/replace burnt out leds on both sides of steps. The raised tread look is a good idea & allows them to "appear as floating" & not anchored to wall, elevating the design to a nicer look. Alot of the under stair work could have all been done before installing the panels .
LED strip lights have an average lifespan of 30,000 to 50,000 hours. Assuming 5 hours of use per day, that's over 16 years on the low end. I don't think it's going to be an issue.
Excelente trabajo lo felicito 👍🇨🇱 que tengan un lindo día usted y familia a cuidarse mucho todo
The simplicity of your approach is truly beautiful!
You should have added an aluminum chanel for a heat sink for your LEDs if your going to that muchwork .It will make your lights last 5 times longer and its dirt chesp.
Sei bravissimo 👍
Светодиоды выделяют тепло. На правильных изделиях их крепят к теплоотводящим поверхностям. Типа аллюминиевых профилей.
В данном случае светодиоды теплоизолировали. Они будут сильно греться.
Как результат - быстрая деградация.
Возможно, в течении года.
Как менять ленту?
Excelente trabajo mucho talento y dedicación felicidades.
Wow this is quality work!!
Братан ,ты все топы электроинструмента отрекламировал! Лайк!😂
Великолепно,профессионалы😊
Great build not just the stairs but the shower as well. As some have pointed out replacing LED strip will require a lot of unnecessary work if they were installed a different way.
Definitely liked the pet bed under the stairs and little cupboard.
Great video.
I'm all for adhesives but there's a term. Less is more. Copious amounts of adhesive don't cure properly. The landing at the bottom, well, I'm not sure what happened there?Was the end result good looking, sure.
Клей затвердеет. Потом. Вопрос времени. В остальном верно сказано, меньше- лучше.
Thank you, you work very well and your work is very technical
Красивая и качественная работа!!!Завораживает, взгляд не оторвать!!!
That is some beautiful work
I've seen exactly this staircase rebuild last week at Quantum. 😮
Content stalkers
j'aime 💛beaucoup ce nouveau format. merci.
+1 like
Edit: mais je préfères le format en plein écran que le format short, je suis sur PC / MSI GT73VR 7RE-486FR Titan SLI 4K /Edit
You do superb quality work, respect.
Precision work. Neat and tidy.
Beautiful work.
I would love to have someone like you do this for me. Great job
Really awesome project and a lot of hard work which should always be appreciated. Amazing job guys and it looks fantastic😎🇬🇧🏴
Hello my friend, your work is more than wonderful. Your high-level work skills and techniques have made me very enthusiastic about entering this field and gaining skills from you personally. I only need the work tools and start immediately. I wish you success, my friend. ❤
Хорошая работа друг 🤝😁👍
Лохотрон для заказчика за серьёзные деньги!!! 😂
Nice work man 👍👍👍👍🤘
Классно развёл заказчика на $$$ 🤣🤣🤣
Thank you for the update, TechFreeze..!! Truly a work of art. The second video showing the installation of a curbless shower system is amazing as well.
Love it and great video. My only thing would be to hide the led from top by some defuse strip vs encased in epoxy. Those go bad that is entire stair replacement
Красавцы! Руки из плеч!
Good work!
Great Job
Good organazer,lov it
And if the LEDs stop working lol?
Really nice work… well done. But I would never cast in a led light strip… ever.
Молодцы ребята! Класс!
That's one expensive LED replacement job😂
Very creative. Great job!
Молодец, заметно сделал!
I can definitely lift some ideas from this. Minor thought, but why not insulate under the landing and respective treads too?! Not a fan of the handrail/bracket choice
Dobra robota 👍
Great work!
Hello Hello just like start with I first time watcher of this and must say I like your work definitely got a new subscriber in me but one thing I must say is I really enjoyed the little fire hydrants you paint on walls underneath steps for dog area you get 👍👍👍 from me plus thanks an keep making great content
O Problema é a hora que o LED Queimar, como é que faz, Desmancha para Colocar outro!?!?
Я читал, что Гарри Поттер жил под лестницей. Но не думал, что так шикарно)
Que trabalheira, ficou bom, mas como fazer caso a fita de led venha precisar de manutenção?
Really cool work, those projects mean business
ABSOLUTELY AMAZING DUDE 🇺🇸
Bravo les profs ❤
Not a good idea to epoxy in strip lighting. Probably made in China and will need replaced sooner rather than later. Looks cool though.
I very much agree with you.
Si algun led se quema ,haces una escalera nueva .
Son extremadamente economicas y sencillas de fabricar ...
Admire the skill,enthusiasm and ingenuity; why cut up solid stairs to begin with? ...sorry I get it now. That's a solid well done
Шир потреб за дорого и материалы так себе.
Yeah imma have to just glue a strip of lights along the edges and be done.
Why attach the inside stringer to the wall? If that wall settles it's going to pull the stairs out of level.
I would never use drywall in the shower. Even the blue or green moisture resistant. Cement board or Schlueter foam board only. The drywall is only for the rest of the bathroom.
Not a fan of the LED look. Who really wants to be blinded when going up and down stairs? Then you also made it impossible for the LED to be replaced when the diodes start burning out without redoing the project.
The LED really should be an accent for the stairs, so it's best to have the strips run along the nose of each tread. That way they're pointing down and not directly in the eyes. They're easily accessible and replaceable.
Those Led's last 50 years?
Я одно не понял,зачем разобрали лестницу?Поставили другую,не чем не лучшую,только понтами и из дешёвого материала.К чему,зачем?
Looks like the recess light was drilled wrong the first time.
Und wie kommst an das LED Band hin, wenn es den Geist aufgibt?
What happens when Leds go bad?
Кайф
Когда попросили сделать лестницу а в итоге сделал ванную. единственный нюанс всё кривое и не по уровню😂😂😂😂
I learned a phrase to excuse lazy precision: "I'm not building a piano". Your workmanship could actually build a piano.
Жаль, безжалостно, разломанную лестницу😂
Aguanta la entrega😅😅😅 esos leds no son eternos para cambiarlos... Vaya lío...
Хересе лестница!
This is a joke. No one builds stairs like this because you’d never be able to tear it out without ruining everything. Fun fact: those LED strips aren’t good forever. This was a waste of $3000.
Простая лестница,а делает долго с большим количеством инструмента.можно сделать проще и надёжнее.
Конструкция совершенно не продумана. Видно, что собирают первый раз. Материалы нехорошие использовали. Старая лестница была лучше. Это видно по демонтажу.
Согласен заплатить 300 баксов ему, пусть сделает мне лестницу. Можно попроще, я не превереда.
7:41 what kind of blue machine name???
Кондуктор. Мебельный.
Полный комплект Кондуктор Pocket-Hole Jig 720 Pro с комплектом для установки на верстак KREG KPHJ720PRO-INT
После решетки хозяйку повёл расплачиваться что-ли😊😊
You need to use some glue.
Like all the glues...
It's a pity that in six months the LEDs will burn out and everything will need to be taken apart.
Сгорит подсветка - да и черт сней, новую смастерим. 😂😂😂😂😂
sad to see no use of personal protection particularly eye protection
How to make a $3000 staircase/closet using your $5000 wood shop
Quando queimar os leds troca-se a escada? Isso não é nada pratico.
Now pray those cheap Chinese LEDs don't blow out
Дороже дома выходит
Watching screws being screwed, watching holes being drilled, watching saws sawing and cables being installed is the most boring entertainment on TH-cam nowadays. 😊
Young "Americans" learn this skills and your borders will be free of workers😊
Лучше бы показал, как она выглядит, вместо этой чепухи.
Absolutely horrendous. No idea where to start on this abomination. Poor craftsmanship and work practices but worst of all truly awful planning and design. All flash and cash for this trash.
Why is it 3k? I could build that for under $300 easily
Show us. And I’ll pay you 5K. Go, boy!
It is quite overkill.
$3,000???? With everything entailed,how did you make any money? Want a job in Virginia 😂?
Что не устраивало.
Где сидел ?
Эти ёлочки красные не подходят.
А если диод сгорит??? 😵💫
Destroying a perfect stair for such a cheap eyecatcher.
Man sieht die fehlende deutsche Tischlerei Ausbildung.
Komplett falsch gemacht!
Typisch deutsch, eine geniale Arbeit niedermachen
Awful lot of work for such a dumb project
У него лента бессмертная что ли? Теперь каждый каждые полтора года каждый раз вся эта ёбань чтоб не поменять?
The installer is damn sexy!!
Terrible carpentry the wost stairs ive ever seen in my life cowboys
Ridiculous.
Built like a brick sht house is an understatement. Nice
Халтура!😊