Big Brandoh, liking your content! I'm disabled looking to start a small clothing cap apparel! Naming it after my Grandson PAC Apparel (Parker Adam Camacho) Right On!
Just found your channel this is really helpful information! I’m starting out it’s chaotic being one person and making all my designs custom myself and learning how to do all of this in the process plus reaching out to manufacturers for packaging but I’m excited and nervous but know it’ll be all worth it 🙏🏾🙏🏾
Thank you for taking the time to put your knowledge to video and getting the info across in an easy to understand way. I appreciate that. I do have one question. How well will the design hold up over time and multiple washes compared to other methods? Since you're using it I'm guessing it's as good or better than anything else?
thanks for watchin. you can use mouse pads. i have a video showing the process. type in the youtube search bar "big brandoh custom size labels" the videos should pop up.
Thanks for all of this solid info! Do you have any content on how you launch a new design? Pre-orders, website, or social media? What's the process there?
Hey, so my comment for you is I know they say four fingers down, but I have small hands. How would I accommodate that when measuring for the left chest press?
Great video Brandoh. You're using a hat press to hit the label and left chest? Also, I've actually been following you for years; almost forgot since moving around the past few years; glad I reconnected, appreciate your channel!
Happy Thanksgiving to all! Mr. Brandoh thank you for all of your videos. The content is great and greatly helps point me in the right direction. I am new to the field and am in the middle of doing my research and tests. I have what I think may be a simple question. The section where you talk about pressing a sample shirt with pieces of your transfer at different temperatures. If I do my first test sample at 300 degrees and then move onto to 305 or 310 degrees for my next sample. Do I need to prepare or protect the first sample from the heat? I do have the non-stick upper platen protector on my press. You help would be greatly appreciated.
no i dont change the design size based on t shirt size. i use the same design on size small and 3XL. gotta remember a screen print shop burns one screen and prints all t shirt sizes using that one screen.
Big Brandoh; LET'S GO!!! Dope video!.. I attempted to reach out to you via email in regards to this same design, back when you where on squad creatives podcast. What advice moving forward would you have to someone with similar design?
great minds will always think alike. personally speaking, any time there is similarity's in designs, i feel like there is enough money for everybody to make. google "gods plan shirt" and see how many people are selling the same thing on the internet. i never worry about what the next person is doing, i always worry about myself and myself only. BUT, thats just my take on it. lots of people feel differently about it.
@@BigBrandoh I definitely dig that!! Actually I thought back to when you were doing the churro squad tees and what you said when someone tried to mimic your design. LOL! There will always similarities in designs rather it be placement, font, sayings etc.. thanks for helping me realize that and for the recommendation 😉👍🏽!!
yes. i got vids on my channel showing how to do it with no hat press. you will need a mouse pad tho. hit the youtube search bar with "big brandoh custom neck label" and "big brandoh sleeve print"
i prefer screen printed transfers. i like the feel, quality, clarity and durability the best. also i like the ease of use and efficiency of screen printed transfers. i can do 100 shirts with front and back printing in less than an hour.
it depends on the design. ive done left chest designs that are 2" and ive done some that are 6" and everything in between. when i say it depends on the design, if i told you this design in the vid is 3x4 but your design is a straight bar of text, your gona stretch that bar to be 3x4? no that would look weird and not proportional. get me? your best bet is to take some tape and tape off the soze that looks good to you, measure that and design to those dimensions.
Hey bro, I enjoy your videos as we are just getting into the Tshirt printing business and I find your advice super helpful ! I have a question regarding the temperatures on the heatpress and the time you are pressing - I see a lot of people on youtube doing their DTG and DTF with 350F (177C) degrees heatpresses for 30-40, sometimes even 45 seconds. In this video I see you doing 320 for 15 seconds. Do the temperatures you use vary depending on what you are pressing, or is this pretty much the default you are using? What are the downsides of using higher temperature on the press for a longer periods of time ? Thanks a bunch !
application settings are based on the specific transfer you are pressing. any company you buy transfers from will give you application instructions. use those instructions as a starting point and you make the changes as needed.
the biggest sheet Supacolor offers. i dont remember the exact measurements but if you click the supacolor link in the description and look up the biggest sheet they offer. there it is
i dont use rulers cuz it slows down my process. i suggest finding a visual indicator for yourself to help you find the perfect placement. if rulers help you, use a ruler to find what the perfect placement is to you. for me, 4 of my fingers down from the collar is what looks good to me. doesnt mean thats the correct measurement for print placement. thats just what looks good to me. you have to find what looks good to you and what works within your work flow
im not a lawyer or an attorney. So i cant give legal advice. I would recommend seeking professional advice from an attorney if you were curious about the laws and regulations.
Hello, I am a manufacturer of DTG DTF printers. Our company has over 10 years of industry experience, and we have high-quality printers and services! If you need to replace or add a printer, please feel free to contact me! Thank you.
Mr. Brandoh thank you for your time and how you teach. You are a blessing to a lot of us. Much love ❤️ and respect.
That thought on the arm logo being out the window is a 💎. That's big brain stuff man (Big Braindoh). You always come with something 🔥
Always appreciate your videos. Thanks for your time helping us. 💯
Big Brandoh, liking your content! I'm disabled looking to start a small clothing cap apparel! Naming it after my Grandson PAC Apparel (Parker Adam Camacho) Right On!
Just found your channel this is really helpful information! I’m starting out it’s chaotic being one person and making all my designs custom myself and learning how to do all of this in the process plus reaching out to manufacturers for packaging but I’m excited and nervous but know it’ll be all worth it 🙏🏾🙏🏾
I had to subscribe. This guy is awesome & amazing! Great videos!
Definitely subscribing. I’m about to start making my own MERCH for my photography company and your videos are very informative.
big ups to you brandoh!....i just started getting into the tshirt game and your videos helped out soo much!....
Great Video.. Thanks BRANDOH🔥🎯💙
yoooooo thanks for watchin 💪🏾💪🏾💪🏾 i really appreciate it
Left side for the ride. That's dope.
And I love watching your videos also very very very informative
Bro im so fucking happy I came across your channel. Much respect
Thank you for taking the time to put your knowledge to video and getting the info across in an easy to understand way. I appreciate that. I do have one question. How well will the design hold up over time and multiple washes compared to other methods? Since you're using it I'm guessing it's as good or better than anything else?
thanks for watching. type in the youtube search bar "big brandoh wash test" and you can see the results for yourself in my videos.
I love your videos ❤❤
Appreciate the tutorial
Appreciate the help
Thank you for the video! When you're just starting with a full size heat press, what is the best way to do the neck label?
thanks for watchin. you can use mouse pads. i have a video showing the process. type in the youtube search bar "big brandoh custom size labels" the videos should pop up.
Thanks for all of this solid info! Do you have any content on how you launch a new design? Pre-orders, website, or social media? What's the process there?
yup. hit the youtube search bar with "big brandoh marketing" you'll see my strategies.
@@BigBrandoh 🔥 thanks! And also thank you for putting out all of this info.
Thank you for this! I have a question. How do you store your gang sheets that aren’t being used?
i keep them in the bags and boxes that they come in. just throw them in a drawer
sir, would you mind if i ask the brand name of your cap press and heat press? i would love to hear it sir big brandoh. from philippines subscriber.
HPN. i have links in the description box of all my equipment. thanks tor watching
After you peel and press a 2nd time, is it the full 15 sec? Thanks for sharing the process!
when you press a second time after usually 5-6 seconds is good. you need just enough to reinforce the graphic into the fabric.
Hey, so my comment for you is I know they say four fingers down, but I have small hands. How would I accommodate that when measuring for the left chest press?
Great video Brandoh. You're using a hat press to hit the label and left chest?
Also, I've actually been following you for years; almost forgot since moving around the past few years; glad I reconnected, appreciate your channel!
i use my hat press to do neck labels and sleeve hits. not left chest.
@@BigBrandoh Thank you. Appreciate it. I meant sleeve lol
Happy Thanksgiving to all! Mr. Brandoh thank you for all of your videos. The content is great and greatly helps point me in the right direction. I am new to the field and am in the middle of doing my research and tests.
I have what I think may be a simple question. The section where you talk about pressing a sample shirt with pieces of your transfer at different temperatures. If I do my first test sample at 300 degrees and then move onto to 305 or 310 degrees for my next sample. Do I need to prepare or protect the first sample from the heat? I do have the non-stick upper platen protector on my press. You help would be greatly appreciated.
Big Brandoh? Are you using dtf printer? Like this video Men alot of help. Thank you. PINOY!!
no i am not using dtf printer. these transfers are made by Supacolor. it is a screen printed transfer
@@BigBrandoh do you think Dtf printer is worth it?
i made videos about dtf printers and transfers. check it out when you get a chance. type in the youtube search bar "big brandoh dtf printers"
I’ve only ordered from transfer express. I have an order to place with supacolor. Do you have any videos on how to order with supacolor ?
Thank you😀
I appreciate you bro.
Do you use shaka wear garment dyed or just the max?
if your doing a large transfer on both sides of the shirt can you load that like a screen print, instead of the whole shirt being pressed?
yeah you can load the shirt however you want. its really up to you and what feels right to you
@big brandoh question,what temp and time do you press vinyl on 50/50 poly cotton blend?,I just got everything so much help is needed
temp and time is based on the vinyl or transfer you use. whatever your using should have came with application instructions.
Who made your transfers for you? I need somebody to do mine.
check out the links in the description box.
Hey question for you t-shirts print do you use the same size for. L to a 3XL or u change the print sizes thanks
no i dont change the design size based on t shirt size. i use the same design on size small and 3XL. gotta remember a screen print shop burns one screen and prints all t shirt sizes using that one screen.
@@BigBrandoh
Thanks
Your video had help me a lot I appreciate the time you take to make every single one of the god bless
Big Brandoh; LET'S GO!!! Dope video!.. I attempted to reach out to you via email in regards to this same design, back when you where on squad creatives podcast. What advice moving forward would you have to someone with similar design?
great minds will always think alike. personally speaking, any time there is similarity's in designs, i feel like there is enough money for everybody to make. google "gods plan shirt" and see how many people are selling the same thing on the internet. i never worry about what the next person is doing, i always worry about myself and myself only. BUT, thats just my take on it. lots of people feel differently about it.
@@BigBrandoh I definitely dig that!! Actually I thought back to when you were doing the churro squad tees and what you said when someone tried to mimic your design. LOL! There will always similarities in designs rather it be placement, font, sayings etc.. thanks for helping me realize that and for the recommendation 😉👍🏽!!
thanks boss . is it possible to do the sleeve and neck on a regular heat press?
yes. i got vids on my channel showing how to do it with no hat press. you will need a mouse pad tho. hit the youtube search bar with "big brandoh custom neck label" and "big brandoh sleeve print"
Heyy what’s the white sheet on the top plate of your press? Is that parchment paper? The press I have doesn’t have that on there
nonstick cover by heat press nation. its like a teflon sheet that fits on your press like a bed sheet.
Does the chest hit get pressed twice when you do the back? And is that ok?
Do you press all of your ahirts after receiving the order from Supacolor or do you wait for the orders to come in?
Did you have to trademark the west side part or is it considered an ornament?
Hi, Big Bandoh. Was wondering why you don't use Dark Transfer Paper over vinyl. Could you share your thoughts?
Thanks and more power to your channel.
i prefer screen printed transfers. i like the feel, quality, clarity and durability the best. also i like the ease of use and efficiency of screen printed transfers. i can do 100 shirts with front and back printing in less than an hour.
YOU screwed in the teflon paper onto the top? How big is that sheet? Where can i find it? Thx
no refrigerator magnet clips
@@BigBrandoh after further research , saw heatpressnation has a tan cover for the top part. in other videos you do have the clips
What program do you use to get the dimensions how you want them on the print
i use photoshop and illustrator
Dope ass shirt!!!!
You don’t repress the dtf after removing the top cover of dtf image ?
thanks for watchin. this is not a dtf print. but i do repress after i remove the backing.
@@BigBrandoh oh ok got it .. thanks for the 411 and the dope vids .. 🤙🏽
Great video Brando when ordering left chest prints on a gang sheet what size are your left chest print designs
it depends on the design. ive done left chest designs that are 2" and ive done some that are 6" and everything in between. when i say it depends on the design, if i told you this design in the vid is 3x4 but your design is a straight bar of text, your gona stretch that bar to be 3x4? no that would look weird and not proportional. get me? your best bet is to take some tape and tape off the soze that looks good to you, measure that and design to those dimensions.
@@BigBrandoh Gotcha❤️
man do you have a class we can sign up for
nah. all the info is free on my channel for you. the playlists will help too
Is the big back print the 11.7 x 16 size supacolor offers?
yes
Hey bro, I enjoy your videos as we are just getting into the Tshirt printing business and I find your advice super helpful ! I have a question regarding the temperatures on the heatpress and the time you are pressing - I see a lot of people on youtube doing their DTG and DTF with 350F (177C) degrees heatpresses for 30-40, sometimes even 45 seconds. In this video I see you doing 320 for 15 seconds. Do the temperatures you use vary depending on what you are pressing, or is this pretty much the default you are using? What are the downsides of using higher temperature on the press for a longer periods of time ? Thanks a bunch !
application settings are based on the specific transfer you are pressing. any company you buy transfers from will give you application instructions. use those instructions as a starting point and you make the changes as needed.
What size is the back piece? 11x11 or 14x14?
For the supacolor which one do you use for your shirts?
What size did you do for the back?
its the biggest sheet size Supacolor offers. dont remember the exact size
What is the brand for your neck label press?
@bigbrandoh Do you know if I can I use this process for passport covers?
hello, im not sure. it all depends what the passport cover is made out of.
@@BigBrandoh Ok Cool. PU Faux leather covers
Dimensions on that back print you did?
the biggest sheet Supacolor offers. i dont remember the exact measurements but if you click the supacolor link in the description and look up the biggest sheet they offer. there it is
Who you order your transfers from
"Nobody reads that stuff" 🤣 ain't that the truth !
4 fingers are different on different size hands.. I have very small hands and so cm or inches would be helpful. Thank you.
i dont use rulers cuz it slows down my process. i suggest finding a visual indicator for yourself to help you find the perfect placement. if rulers help you, use a ruler to find what the perfect placement is to you. for me, 4 of my fingers down from the collar is what looks good to me. doesnt mean thats the correct measurement for print placement. thats just what looks good to me. you have to find what looks good to you and what works within your work flow
What table are you using?
work table from lowes, home depot, costco, sams club. they all got the same one
Wat size is that back print
What’s the big back print size
i did a front and back press and the left chest press got messed up when I pressed the back
What font is that? ❤❤❤
its called Glamour
What size was the back print?
full size Supacolor Transfer Sheet. they call it A3. i dont remember what the exact dimensions are
@@BigBrandoh thanx!
hit the like
👌🏽🔥
Aren’t you required by law to put all the info on the neck tag
im not a lawyer or an attorney. So i cant give legal advice. I would recommend seeking professional advice from an attorney if you were curious about the laws and regulations.
Hello, I am a manufacturer of DTG DTF printers. Our company has over 10 years of industry experience, and we have high-quality printers and services! If you need to replace or add a printer, please feel free to contact me! Thank you.