TLDR if you're hurried: Dirty or chalked ropes frayed much faster than clean ropes in stress tests . "Dry-treated" ropes, treated with a chemical to resist water and dirt, were somewhat resistant to this effect, but dirt and chalk still made them fray faster. Washing ropes does help protect ropes, but don't climb with a wet rope or you'll damage it, and likewise don't use a heater to dry the rope.
As a user of Mammut ropes in some pretty abrasive conditions, I want to let you guys know that I buy your ropes specifically because they hold up to abrasion better than other company's ropes in my experience. Just wanted to let you know your hard work in the lab is paying off out at the crag!
my experience is completely the opposite! was just scroling down to type that I bought a brand new rope and in just two weeks have had to cut it! posted about it on instagram and had several people replying (from places as far as the US, Thailand and Jamaica) saying their ropes had deteriorated extremelly fast too! I bought a Mammut rope 12 years ago and it was absolutely fine but this new one has been absolutely terrible, I have another Sterling rope that has been exposed to the exact same dirt and conditions and climbing which is a month older and is looking as good as new...
@@facelesstraveler Not an accusation toward you, but are your absolutely sure you didn't end up with a Chinese counterfeit rope? It happens a metric frackton. Fake car parts, fake tools, fake infrastructure electronics (telco routers), fake clothes, fake food items. In fact I can't think of a category that isn't fighting a tidal wave of Chinese counterfeits.
or maybe they're going through all this effort to justify the poor quality of its recent ropes...(I bought one recently and its deteriorated super fast) they should repeat these tests with other brands
@@twobrokenlegs13 do you work for them? Many people recently saying their new ropes are terrible, one even saying that Mammut ropes recently bought for a gym are also disintegrating choss, and there is not a lot of dirt in gyms
As someone who worked as a carpet cleaner, it is incredibly difficult to explain to people that some areas of the carpet simply will never look lile new because of how extreme abrasion can effect the look of carpet, and how it reflects light back at the eyes. The damage can sometimes be so extensive that old dirt goes all the way down and damages the carpet glue that holds it all together.
Carpet glue? … 😞. That’s sucks to hear. I still use my mothers carpet she got when she was 20 so they are 50 years old and look new. They’ve moved 3 countries and have outlived her. Sometimes just buy for sustainability. I think they were made in some Turkish village, (or factory), but definitely visibly hand made. Never had a complaint from the carpet cleaner about dirt or glue.
@Emir K I'm talking about modern synthetic wall to wall carpeting, not a hand woven wool or silk RUG. Carpeting, and rugs, can last well over a decade or more if cared for properly. The video is clearly about the effects that dirt and other abrasives can have on the strength and appearance of a rope, and not carpet, but the same principle applies. If left dirty, it will fall apart much faster than if kept clean.
I don’t climb or use any equipment like this, but it’s always good to educate oneself especially with such quality educational content as yours, friend. Thank you for all the work put into these videos
You dont need to be a climber for it to be useful information, in my opinion. Because it's useful information in other scenarios. Also you can always give that information to other people you know to help them out.
You said what i was about to say ... Thank you for the comment and thank you guys for the video its so good to learn new things even if you will never use it
Beal has original detergent for washing ropes harnesses etc, if anyone is thinking of washing their equipment after watching this video, this is probably the safest option.
@@PapP148 If you use regular detergents with stuff for washing your clothes it could have bleaches and various enzymes that were put in there to dissolve or break down dirt, fats and all things related to humans being dirty. This isn't the same at all for ropes and if for example you were to use bleaching detergent (whitening) on a nylon rope, it could react with the nylon, bleach being an oxidant and nylon being quite oxidazable due to it's chemical structure. Beals detergent probably accounts for all this and actually is designed to clean stuff out of rope that a rope would be drity with, without compromising the chemical structure of the polymers you rely on not to die.
Amazing results! I'm a quality control tech at Sterling Rope in the States. Impressive results on the dirty and chalk filled ropes. I have been interested in conducting these tests for some time and I'm glad to see other companies doing the same. Looking forward to seeing the wet rope drop tower test. Great job guys and gals!
@@HardIsEasyHey there. Just found your channel, and I'm hoping you'll see this - In washing ropes, it's clear to NOT dry them over a heat source. This would be static, though, so what about in a dryer on low heat that tumbles and keeps them constantly moving / air circulating? Or, what about in my tumble dryer, but with NO heat (aka air setting)? I don't have much room to spread lots of rope to air dry. My concern from past experience drying camping gear is the areas of overlap on the rope can get musty or worse... at least, with the ropes I've been using. I don't climb like this, but I'm getting more deeply into "bushcraft adjacent" type stuff. One of the things I do is get up in trees for overnight or even mobility. This often requires setting ropes over lowest branches and "walking up" the trunks, and repelling to get down. I've been exploring kevlar rope for this as well, since it's pretty strong and durable but not nearly as bulky. I'm hoping I don't find it's limits the hard way, tho.😅 Thanks much!
I think this is the best channel about climbing equipment and safety in youtube. Why? The videos are about scenarios every climber must have thought, but only few go and dig deeper. Nice job!
not everyone digging deeper is a full time professional youtuber though, everything in that video i told the people for so long time, but without a shiny video and big sponsor offering such machinery , people believe nothing.
@@apeclimbing yea, you need to demonstrate your idea before people believe it. I mean, you wouldn't want people to believe anything anybody says, or anything you say just on your reputation. But the demonstration doesn't have to be this expensive, you could send it to HOWNOT2 for testing, or develop your own test!
@@apeclimbing Oh! I just got this video from recommendations, I was not specifically looking for this kind of video. Yes it is a different approach when one makes full/partial salary out of youtube. However, I do agree that a lot of great and useful videos don't get the attention they deserve. I would too like to stumble on more random videos here, without google guessing what one might like to see or not.
Great to see these practical tests inside the Mammut facility with their actual engineers. The transparency and simple advice for keeping your ropes clean is excellent!
I don't climb nor do I have plans to any time soon, but you kept me captivated throughout the video. You're a great presenter. It found it to be really interesting and engaging.
I'd love to see the wet ropes that went through the drop tower go through a tension test AND a wear test to see if they break/wear down faster than ropes that never got wet dropped. And ropes that went through a washing cycle with a strong detergent, but that'd start to be a lot of ropes... Thanks for the video and taking the time to make them !
Well it would need a bunch of test cycles but not that much rope, you need only enough rope to span on the machiene, which looks like 4m maximum per sample.
Double-drum spinning dryers where you wrap the rope on the inner and close the outer around and just spin it so air is forced centripetally through the rope are the best. Tumble driers apply a great deal of impact (millions tiny little stresses) and almost always have detergent or softener residue in them. The US Army has an entire manual of rope care as does the Navy.
If you’re in a lab, a dirty rope introduces abrasives into the system; if you’re on a cliff, abrasives are already in the system. A dirty rope could still make that worse, but it would probably be a much smaller change in the real world than in the lab.
The takeaway for me is demonstrating how great the disparity is between lab conditions and real conditions; not so much about how you use the rope, but how big of a grain of salt you take regarding lab testing claims on the ropes you decide to rely on.
@@bradonhoover3002 At the very least, lab testing gives common conditions with which to make comparisons between products. (Assuming you know the testing methodology)
@@myuzu_ I agree. Standardization and isolation of outside factors is important in baseline testing by which to compare a set of products. Testing as it stands is fine for comparing ropes to one another, but the reference point is arbitrary. This video gives a reminder to new climbers who might take lab claims at face value that they should be prepared for the eventuality that their cord might not last as long as it's claimed to, but is still most probably better than another one that was claimed to be worse
Excellent point. However in climbing, sandstone, dirty/chossy rock can introduce dirt to the rope, like lowering over a ledge without an alpine/extension. But getting a rope dirty (like flaking on dirt instead of a bag/tarp), and then running it through gear over and over without washing it, is pretty close to these lab conditions.
I have never written a coment at any video. But you deserve recognition for your job. Your content is not only entertaining but also helpful, well presented, interesting and highly useful. Thank you!!
This explains a lot . I have just come to the conclusion that the same applies to tow rope and snatch straps. The snatch pretty much lives in the dirt and would make a recovery from a deep bog quite dangerous. It's amazing how research in one subject translates to another.
Excellent for Mammut to help with this video - an excellent collab and hopefully we'll see more collaborative videos with other manufacturers. One good thought though is that the same side of the rope would probably not rub against the sharp edge as the rope would probably twist a bit as it's moving over the edge.
Very cool video! As an arborist the stuff you guys trust your life to blows my mind. My climb lines are in the 11-13mm range with minimum strength requirements of 5,400lb, they're made of nylon and/or polyester which don't much care about getting wet. I wash mine often putting oil on it first to get pitch out. According to the manufacturer (Samson) the only common chemical to worry about is bleach so if there's any question of contamination make sure you run a rinse cycle before putting your rope in the machine.
The ropes are definitely very different (despite maybe not appearing so, besides thickness). If I’m not mistaken arborist ropes are generally thicker and static (or semi static?). Climbing ropes are dynamic which is crucial for the application. This greatly reduces the amount of force that gets applied to anchors and the climber when there is a fall. A dynamic rope with a lower breaking strength can hold a fall with less chance of breaking compared to a static rope so it may not be what it appears when comparing the two ropes (the “stronger” rope isn’t always going to be less likely to break, ie if a factor 1 or factor 2 fall happens). Similarly though a dynamic climbing rope isn’t going to preform as well for an arborist. They’re both specialized pieces of gear.
Dude... Just wanted to say out of all the channels that Ive clicked on from TH-cam Shorts, your channel does a great job of not making it confusing on where the full length video that matches the short is so easy to find lol, thank you great video!
Interesting confirmation that dirt and grit essentially turn the rope into sandpaper, which means it wears out much faster. It’s cool to see the same effect in a different context! Also fascinating that washing ropes had a difference in how much they frayed, but that washed and unwashed ropes both fail at roughly the same rate. Really cool!
HOLY MACARONI. Loved the video, not nerdy at all. Super informative and I love how videos now are taking the science shows of the 90's and 00's and make availble on TH-cam.
I can tell you from experience in 3d printing that if your polymer rope has absorbed moisture it will need to be mildly heated to drive moisture away. Simply drying at room temperature will only remove moisture that is clinging to the fibers but anything that has been hydrolyzed will remain and compromise the polymer properties. you do not need much heat a day in hot sun or maybe the lowest temperature setting on your dryer. Always check the material data for exact temperature tolerances
Great stuff here and very informative! Suggestion for a follow up test: how does a dirty rope compare to a clean one when doing fall testing? Does the dirt also reduce the lifetime when counting falls before it fails? Most of my ropes fail not due to abrasion but from repeated falls (and jugging back up on it after)
what stresses a rope in a fall is the bending radius in knots or squeezing on biners. a kind of friction not to different from this abrasion test, so i am pretty sure that a dirty rope suffers more damage on falling on it too. the most damage likely will happen on the contact point with the most stress at highest quichdraw or, when contacting rock for sure.
@@apeclimbing I agree that certainly seems likely. Curious if it is a relatively minor effect (compared to abrasion) or very severe. That is, does fall number rating drop by, say, 10% or more like 50% for a dirty rope? That's less clear!
I’m over here in the United States watching this thinking about how valuable this information is for my kinetic tow ropes and the effects of snow and dirt on the rope life. Very fascinating information to consider. Up to now, the only rule is to never run it over but I think pulling while wet or dirty should now become a consideration.
Thank you for the great video! As a (relatively) new climber I have been wondering about the proper maintenance of climbing shoes and would really appreciate a similar video to see the effects the washing machine in performance and/or other things or no washing at all. Your experience with climbing shoes would also be valuable as well if you wouldn’t mind sharing that.😅 Thank you again for all your videos!
I don't climb, but this was an interesting question that I NEEDED the answers for. Very well done, Mammut staff was very accommodating! It makes sense that any kind of dirt, or foreign substance increases the abrasion on the rope, causing it to fail more quickly. Great video.
Surprised they weren't already performing such tests. Also, I only used ropes indoors - lead climbing - and I still got those black streaks, or darkened sections on my rope. The gym isn't exactly clean, but it's not crag dirt either -- so probably a mix of general grime, oils, dust etc is also causing this.
Also the stripes of the lab rope they showed in the video look nothing like the stripes of the "real" rope so I'm not convinced that those stripes really stem from dirt in general. Also the color (silver/gray) seems to point towards aluminium abrasion
As a kid I would always help my dad with things in my yard (which is all sand.) He would always tell me to get as little dirt as possible in the ropes because it could mess them up.
I don't think this experiment is accurate, and potentially comes to a wrong conclusion. The blade used here is furnished metal, and microscopically it's very smooth, so the force is spread out in a large area without any local high pressure that forces the microfiber to snap. And dirt creates a high-pressure area since it lays between the blade and the rope unevenly, so dirty ropes snap faster in this case. However, in real life, rocks are not smooth, the uneven pressure is innate, the effect of dirt is unknown and it might add up or counteract the surface profile of a rock. I wish more realistic experiments can be done since the current conclusion might be misleading and premature considering it's vital in saving lives.
Risky question i would ask mammut to test: of course washing/wearing the rope is removing the fluorine waterproof coating. Would it work re-treating the rope with something like Nixwax? (But sounds hazardous stuff). And thanks a lot for the TOP LEVEL informative and scientific content :)
Great experiment!. Chalk, or the dirt increases friction in contact, so it is normal the rope wears more. If the rope was soaked in oil i suppose it would last much longer, but it would dangerously negatively impact on climbing experience. So it is fair to keep using dirty ones, but just check for damage, and cautiously decide if the rope still is good for the stress you intend to put it on for your next climb.
For the same Reason Carbon ropes for Kite Dragons are under no circumstances dipped into Saltwater or mud. The Salt will dry and form little crystals like the mud particles than reaming the line and splice it. So if your lines get wet in salt water or mud it is considered a total loss due to salt or other stuff that sticks in the lines.
Washing, but particularly using the rope will very probably degrade the treatment. It's more than likely very similar if not the same as hardshell water repellency treatments.
great video, I learned something new today, thanks! I was hoping you would go into a scientific explanation of how chalk and dirt accelerate the wear on ropes. Like are dirt/chalk particles being dragged along the rope and crushing the plastic polymers, or is there a more complex explanation such as they reduce the ability for the rope strands to slide past one another and causing increased stress etc.
Great job. I have always washed my ropes occasionally, though I might switch my detergent to something designed for washing waterproof jackets. It also shows the durability, and therefore the value, of dry ropes. I was not aware that dry ropes were also dirt resistant. Good to know.
Hi! Some factors that can affect this experiment: the tensile strength of where the edge meets the rope does not look like it was taken into account; if one rope was dug in more deeply than another rope, that will affect results, especially since it looks that point was not noticed due to how it was attached to the machine (tied). Also, these ropes look like polyester. If the ends of the rope was melted prior to testing after being cut, this can affect results due to how the rope was twisted. Since the ends of the rope will hold the rope together, we can see that it did actually have an affect on the experiment in the "unwashed unwaxed rope" test. Chalk, talc, and dirt all add friction to the rope, and that friction when rubbed against a rope will cause damage amongst the threads.
u should test different temperatures of washed ropes and whether or not u used washing detergent.. i wonder if the chemicals might effect the rope and high temperatures might weaken it? a washing machine can wash 40 c or 60c or 90c etc
Very interesting video. I've always used a damp cloth to wipe down the rope after climbing outside. It seems to get most of the dirt without the dry time. Any thoughts on this method?
Good idea I do the same because this fast snd easy method removes most of the dirt and this is pretty enough to reduce the negative abrasion effects on the rope without washing and drying
Thanks for the great content! I'm wondering if you talked about whether cleaning a dry-treated rope can affect the dry-treating at all? I'd be interested in knowing if the beneficial effects of removing the dirt/chalk from the rope might "even out" with a negative effect of deteriorating the dry-treatment.
Thanks Ben, good stuff (like always). I'm surprised - I still have the suspicion that washing made the lifespan of 2 of my ropes much shorter, since washing made them more rugged (less "fluffy") - maybe washed out the dry treatment (yep, used very little light detergent, dried correctly, did tumble on 400rpm). Totally doesn't match your experiment :)
Nice tests thnx!! However the conclusion about the extra wear at the rope ends because of chalk is very far fetched as the usual spot for the extra wear is 1 to 2 meters away from the knot and where you touch it the most. It's simply the repetitive falling on the same spot. When you think about it that spot where you touch it the most actually rarely touches the rocks
Subbed. As you were talking about wanting to test the effects of water on rope, I thought of Ryan's channel. Then you mentioned that y'all are friends. Cool. Can't wait to see the next video!
Guess this could also apply to winch ropes. Mud riding soaks the whole rope in dirt and mud and it scrapes against the fairlead plate. Guess it explains why they only last one season on average.
A good mild detergent for handwashing would be dish soap like Dawn. Mild detergents for washing machines will be labeled something like "gentle" or "for sensitive skin".
As much as I liked climbing and repelling, I can’t do it anymore. I’ve always loved carabiners for some reason. I use them for just about anything you could think of. If I’m at a store that carries climbing gear, I have to go look and see if they have any unique operating ones I don’t have or haven’t seen.
I washed my first rope, a 9.8mm Mammut. I hand washed it in a tub of warm water, no soap. Then rinsed it several times. It definitely lasted way longer as a result. Not sure if I'd use a washing machine or not and I definitely wouldn't use soap. But that's just my experience.
@Nathan Taylor the rope just looked cleaner afterwards. I definitely got dirt and dust out of it because the water was dirty. Which is why I carefully rinsed it a couple times. It was like washing a dirty pair of trekking pants. They just feel softer and nice and clean afterwards.
I've never climbed, I have no interest in climbing, and I have never watched any climbing videos before. But here I am watching a 20 minute video on climbing ropes and I'm enjoying every minute of it.
Hey Mammut...I'm in the market for some new rope (a 60m for sport climbing and a 30m for ski mountaineering)...and I'm going to buy Marmut rope specifically because of the assistance you have provided to this channel. Thanks!
Thank you for posting this excellent video! I've long been an advocate for washing climbing ropes frequently. I hope this video will encourage more people to do it 🙂
I love science. This makes me think of the straps used to secure heavy loads on semitrucks... while we strive to secure freight to be as secure and immobile as reasonably possible, inevitably every load is subject to constant vibration and the straps undergo constant turbulence. These straps are never washed except for the rain and can become dry rot.🤔
Washing my ropes regularly (in standard laundry machines) since 15 years, since muddy conditions are most use scenario for me. this video hopefully end the old rope washing dispute
Washing ropes should lead to chalky deposits caused from water. Would be interesting to see if a rope that is washed 10 times has an other effect than one that’s only washed one time!
It's amazing how many people don't realise why they should pay extra for a good Vacuum cleaner for their Carpets, dirt in carpets does exactly the same as it does to the rope. It's also why you should have a good mat for people to clean their shoes on before entering the house and keep the mat clean as well :)
A question about washing I haven’t found anywhere else - how do you know when it’s dry? Just because it’s dry to the touch does not mean the core is dry! It will dry from the outside to inside is my understanding.
TLDR if you're hurried: Dirty or chalked ropes frayed much faster than clean ropes in stress tests . "Dry-treated" ropes, treated with a chemical to resist water and dirt, were somewhat resistant to this effect, but dirt and chalk still made them fray faster. Washing ropes does help protect ropes, but don't climb with a wet rope or you'll damage it, and likewise don't use a heater to dry the rope.
thank you internet person. very cool
thank you internet person.
Thank you, saved me 20 minutes
Thank you so much!
Thank you I was in a hurry
As a user of Mammut ropes in some pretty abrasive conditions, I want to let you guys know that I buy your ropes specifically because they hold up to abrasion better than other company's ropes in my experience. Just wanted to let you know your hard work in the lab is paying off out at the crag!
I hope they are giving you a bonus. Jokes Aside it seems like a good product.
my experience is completely the opposite! was just scroling down to type that I bought a brand new rope and in just two weeks have had to cut it! posted about it on instagram and had several people replying (from places as far as the US, Thailand and Jamaica) saying their ropes had deteriorated extremelly fast too! I bought a Mammut rope 12 years ago and it was absolutely fine but this new one has been absolutely terrible, I have another Sterling rope that has been exposed to the exact same dirt and conditions and climbing which is a month older and is looking as good as new...
You may also try gottifredi maffiori ropes, also Samson ropes is a great dealer
@@facelesstraveler Not an accusation toward you, but are your absolutely sure you didn't end up with a Chinese counterfeit rope? It happens a metric frackton. Fake car parts, fake tools, fake infrastructure electronics (telco routers), fake clothes, fake food items. In fact I can't think of a category that isn't fighting a tidal wave of Chinese counterfeits.
Same here. Have a Mammut Rope for over 15 years. It's not looking new but it's not worn at all!
I gotta say, knowing Mammut is willing to allow you to go through all of this makes me want to give them my money when it comes to buying ropes
Me too. Thanks Mammut, for supporting Ben's work. And of course, it goes without saying, many thanks Ben!
fknah
or maybe they're going through all this effort to justify the poor quality of its recent ropes...(I bought one recently and its deteriorated super fast) they should repeat these tests with other brands
Will be money well spent, I love their ropes!
@@twobrokenlegs13 do you work for them? Many people recently saying their new ropes are terrible, one even saying that Mammut ropes recently bought for a gym are also disintegrating choss, and there is not a lot of dirt in gyms
As someone who worked as a carpet cleaner, it is incredibly difficult to explain to people that some areas of the carpet simply will never look lile new because of how extreme abrasion can effect the look of carpet, and how it reflects light back at the eyes.
The damage can sometimes be so extensive that old dirt goes all the way down and damages the carpet glue that holds it all together.
Carpet glue?
… 😞. That’s sucks to hear. I still use my mothers carpet she got when she was 20 so they are 50 years old and look new. They’ve moved 3 countries and have outlived her.
Sometimes just buy for sustainability.
I think they were made in some Turkish village, (or factory), but definitely visibly hand made.
Never had a complaint from the carpet cleaner about dirt or glue.
@Emir K I'm talking about modern synthetic wall to wall carpeting, not a hand woven wool or silk RUG.
Carpeting, and rugs, can last well over a decade or more if cared for properly.
The video is clearly about the effects that dirt and other abrasives can have on the strength and appearance of a rope, and not carpet, but the same principle applies. If left dirty, it will fall apart much faster than if kept clean.
So vacuuming a carpet weekly really does protect it?
What would use to clean these ropes or protect them? Also, do you follow indyrugwash? Little bit of a cult following
I don’t climb or use any equipment like this, but it’s always good to educate oneself especially with such quality educational content as yours, friend. Thank you for all the work put into these videos
Same & agreed!:D
You dont need to be a climber for it to be useful information, in my opinion. Because it's useful information in other scenarios.
Also you can always give that information to other people you know to help them out.
Free solo!
You said what i was about to say ... Thank you for the comment and thank you guys for the video its so good to learn new things even if you will never use it
I have a long dog leash made out of similar rope material so this info could probably apply to it.
Beal has original detergent for washing ropes harnesses etc, if anyone is thinking of washing their equipment after watching this video, this is probably the safest option.
Why?
@@PapP148 If you use regular detergents with stuff for washing your clothes it could have bleaches and various enzymes that were put in there to dissolve or break down dirt, fats and all things related to humans being dirty. This isn't the same at all for ropes and if for example you were to use bleaching detergent (whitening) on a nylon rope, it could react with the nylon, bleach being an oxidant and nylon being quite oxidazable due to it's chemical structure.
Beals detergent probably accounts for all this and actually is designed to clean stuff out of rope that a rope would be drity with, without compromising the chemical structure of the polymers you rely on not to die.
I was going to say, Sterling also has a rope wash, “wicked good rope wash”
@@PBnJConniseur Well said
Well, just don't use any detergent at all. Let the water do its thing.
Amazing results! I'm a quality control tech at Sterling Rope in the States. Impressive results on the dirty and chalk filled ropes. I have been interested in conducting these tests for some time and I'm glad to see other companies doing the same. Looking forward to seeing the wet rope drop tower test. Great job guys and gals!
Great to hear! Thanks!
@@HardIsEasyHey there. Just found your channel, and I'm hoping you'll see this -
In washing ropes, it's clear to NOT dry them over a heat source. This would be static, though, so what about in a dryer on low heat that tumbles and keeps them constantly moving / air circulating? Or, what about in my tumble dryer, but with NO heat (aka air setting)?
I don't have much room to spread lots of rope to air dry. My concern from past experience drying camping gear is the areas of overlap on the rope can get musty or worse... at least, with the ropes I've been using.
I don't climb like this, but I'm getting more deeply into "bushcraft adjacent" type stuff. One of the things I do is get up in trees for overnight or even mobility. This often requires setting ropes over lowest branches and "walking up" the trunks, and repelling to get down. I've been exploring kevlar rope for this as well, since it's pretty strong and durable but not nearly as bulky. I'm hoping I don't find it's limits the hard way, tho.😅
Thanks much!
I think this is the best channel about climbing equipment and safety in youtube. Why? The videos are about scenarios every climber must have thought, but only few go and dig deeper. Nice job!
not everyone digging deeper is a full time professional youtuber though, everything in that video i told the people for so long time, but without a shiny video and big sponsor offering such machinery , people believe nothing.
@@apeclimbing yea, you need to demonstrate your idea before people believe it. I mean, you wouldn't want people to believe anything anybody says, or anything you say just on your reputation.
But the demonstration doesn't have to be this expensive, you could send it to HOWNOT2 for testing, or develop your own test!
@@apeclimbing Oh! I just got this video from recommendations, I was not specifically looking for this kind of video. Yes it is a different approach when one makes full/partial salary out of youtube. However, I do agree that a lot of great and useful videos don't get the attention they deserve. I would too like to stumble on more random videos here, without google guessing what one might like to see or not.
@@apeclimbing Daten Sammeln ist halt irgendwie aussagekräftiger als "meine persönliche Erfahrung".
@@kilianhzh bro science
Great to see these practical tests inside the Mammut facility with their actual engineers. The transparency and simple advice for keeping your ropes clean is excellent!
I don't climb nor do I have plans to any time soon, but you kept me captivated throughout the video. You're a great presenter. It found it to be really interesting and engaging.
The girl engineer's laughter is healing 😂
Or it makes you sick. 😵💫
I thought it was cute 🥰
I'd love to see the wet ropes that went through the drop tower go through a tension test AND a wear test to see if they break/wear down faster than ropes that never got wet dropped. And ropes that went through a washing cycle with a strong detergent, but that'd start to be a lot of ropes...
Thanks for the video and taking the time to make them !
No need, we already know not to climb on a wet rope.
I second this!
Well it would need a bunch of test cycles but not that much rope, you need only enough rope to span on the machiene, which looks like 4m maximum per sample.
Double-drum spinning dryers where you wrap the rope on the inner and close the outer around and just spin it so air is forced centripetally through the rope are the best. Tumble driers apply a great deal of impact (millions tiny little stresses) and almost always have detergent or softener residue in them.
The US Army has an entire manual of rope care as does the Navy.
I’ve never gone climbing in my life why did I watch this entire video
That question popped in my head shortly after seeing this comment
lets hope one day we look back and appreciate the time we wasted here 😅
If you’re in a lab, a dirty rope introduces abrasives into the system; if you’re on a cliff, abrasives are already in the system. A dirty rope could still make that worse, but it would probably be a much smaller change in the real world than in the lab.
The takeaway for me is demonstrating how great the disparity is between lab conditions and real conditions; not so much about how you use the rope, but how big of a grain of salt you take regarding lab testing claims on the ropes you decide to rely on.
@@bradonhoover3002 At the very least, lab testing gives common conditions with which to make comparisons between products. (Assuming you know the testing methodology)
@@myuzu_ I agree. Standardization and isolation of outside factors is important in baseline testing by which to compare a set of products. Testing as it stands is fine for comparing ropes to one another, but the reference point is arbitrary. This video gives a reminder to new climbers who might take lab claims at face value that they should be prepared for the eventuality that their cord might not last as long as it's claimed to, but is still most probably better than another one that was claimed to be worse
What
Excellent point. However in climbing, sandstone, dirty/chossy rock can introduce dirt to the rope, like lowering over a ledge without an alpine/extension. But getting a rope dirty (like flaking on dirt instead of a bag/tarp), and then running it through gear over and over without washing it, is pretty close to these lab conditions.
I have never written a coment at any video. But you deserve recognition for your job. Your content is not only entertaining but also helpful, well presented, interesting and highly useful. Thank you!!
So much work Ben to make our life safer ! I love this nerdy series :)
This explains a lot . I have just come to the conclusion that the same applies to tow rope and snatch straps. The snatch pretty much lives in the dirt and would make a recovery from a deep bog quite dangerous.
It's amazing how research in one subject translates to another.
Excellent for Mammut to help with this video - an excellent collab and hopefully we'll see more collaborative videos with other manufacturers. One good thought though is that the same side of the rope would probably not rub against the sharp edge as the rope would probably twist a bit as it's moving over the edge.
I’m a college student studying textile engineering and taking a beginner rock climbing class so this video is just perfect!!
🥰 good times at Mammut again
Super nicely done Ben, as always 😊
Aaah always a pleasure to cut your ropes ;)
Very cool video! As an arborist the stuff you guys trust your life to blows my mind. My climb lines are in the 11-13mm range with minimum strength requirements of 5,400lb, they're made of nylon and/or polyester which don't much care about getting wet. I wash mine often putting oil on it first to get pitch out. According to the manufacturer (Samson) the only common chemical to worry about is bleach so if there's any question of contamination make sure you run a rinse cycle before putting your rope in the machine.
The ropes are definitely very different (despite maybe not appearing so, besides thickness). If I’m not mistaken arborist ropes are generally thicker and static (or semi static?). Climbing ropes are dynamic which is crucial for the application. This greatly reduces the amount of force that gets applied to anchors and the climber when there is a fall. A dynamic rope with a lower breaking strength can hold a fall with less chance of breaking compared to a static rope so it may not be what it appears when comparing the two ropes (the “stronger” rope isn’t always going to be less likely to break, ie if a factor 1 or factor 2 fall happens). Similarly though a dynamic climbing rope isn’t going to preform as well for an arborist. They’re both specialized pieces of gear.
The quality is getting real!
Maybe one day will reach unreal level as well :D
@@HardIsEasy Then you will live in Unity (with all things).
Dude... Just wanted to say out of all the channels that Ive clicked on from TH-cam Shorts, your channel does a great job of not making it confusing on where the full length video that matches the short is so easy to find lol, thank you great video!
Interesting confirmation that dirt and grit essentially turn the rope into sandpaper, which means it wears out much faster. It’s cool to see the same effect in a different context! Also fascinating that washing ropes had a difference in how much they frayed, but that washed and unwashed ropes both fail at roughly the same rate. Really cool!
😂😂 Johnny Depps famous line in pirates of the Caribbean "I've got a jar of dirt" love the play on words with bag of dirt
You're truly a gem to the climbing community Ben, thank you for these videos.
HOLY MACARONI. Loved the video, not nerdy at all. Super informative and I love how videos now are taking the science shows of the 90's and 00's and make availble on TH-cam.
Thank you Ben. I love the nerdy episodes! Especially because you go into details.
1:28 "It's multiple bags of durd!" XD
Seeing the wear on the wear block would have been interesting as well
I can tell you from experience in 3d printing that if your polymer rope has absorbed moisture it will need to be mildly heated to drive moisture away. Simply drying at room temperature will only remove moisture that is clinging to the fibers but anything that has been hydrolyzed will remain and compromise the polymer properties. you do not need much heat a day in hot sun or maybe the lowest temperature setting on your dryer. Always check the material data for exact temperature tolerances
I would be interested to see a test of how the tensile strength is affected by clean/dirty ropes that have gone through the abrasion test
25 years ago when i first got introduced to climbing gear, we were told to never let the rope get dirty and why...
Great stuff here and very informative! Suggestion for a follow up test: how does a dirty rope compare to a clean one when doing fall testing? Does the dirt also reduce the lifetime when counting falls before it fails? Most of my ropes fail not due to abrasion but from repeated falls (and jugging back up on it after)
what stresses a rope in a fall is the bending radius in knots or squeezing on biners. a kind of friction not to different from this abrasion test, so i am pretty sure that a dirty rope suffers more damage on falling on it too.
the most damage likely will happen on the contact point with the most stress at highest quichdraw or, when contacting rock for sure.
@@apeclimbing I agree that certainly seems likely. Curious if it is a relatively minor effect (compared to abrasion) or very severe. That is, does fall number rating drop by, say, 10% or more like 50% for a dirty rope? That's less clear!
Amazing content Ben. So useful, so practical!
Always great to see proper tests, none of the old wives tales. Thank you!
I only trust my wife! ❤
I’m over here in the United States watching this thinking about how valuable this information is for my kinetic tow ropes and the effects of snow and dirt on the rope life. Very fascinating information to consider. Up to now, the only rule is to never run it over but I think pulling while wet or dirty should now become a consideration.
Thank you for the great video! As a (relatively) new climber I have been wondering about the proper maintenance of climbing shoes and would really appreciate a similar video to see the effects the washing machine in performance and/or other things or no washing at all. Your experience with climbing shoes would also be valuable as well if you wouldn’t mind sharing that.😅 Thank you again for all your videos!
I don't climb, but this was an interesting question that I NEEDED the answers for. Very well done, Mammut staff was very accommodating! It makes sense that any kind of dirt, or foreign substance increases the abrasion on the rope, causing it to fail more quickly. Great video.
Moral of the story: don't use rope when climbing.
The conversation at 16:29 had me thinking of pruney fingers.
Surprised they weren't already performing such tests. Also, I only used ropes indoors - lead climbing - and I still got those black streaks, or darkened sections on my rope. The gym isn't exactly clean, but it's not crag dirt either -- so probably a mix of general grime, oils, dust etc is also causing this.
Also the stripes of the lab rope they showed in the video look nothing like the stripes of the "real" rope so I'm not convinced that those stripes really stem from dirt in general. Also the color (silver/gray) seems to point towards aluminium abrasion
1:42 that moment when you have a good reference and nobody gets it. (Jack Sparrow jar of dirt)
Awesome idea, and really good scientific methodologies there!! Thanks for the knowledge 💪🏻
As a kid I would always help my dad with things in my yard (which is all sand.) He would always tell me to get as little dirt as possible in the ropes because it could mess them up.
I don't think this experiment is accurate, and potentially comes to a wrong conclusion. The blade used here is furnished metal, and microscopically it's very smooth, so the force is spread out in a large area without any local high pressure that forces the microfiber to snap. And dirt creates a high-pressure area since it lays between the blade and the rope unevenly, so dirty ropes snap faster in this case. However, in real life, rocks are not smooth, the uneven pressure is innate, the effect of dirt is unknown and it might add up or counteract the surface profile of a rock. I wish more realistic experiments can be done since the current conclusion might be misleading and premature considering it's vital in saving lives.
I'm not even climbing myself, but I love to watch this because it's fun science :D
Risky question i would ask mammut to test: of course washing/wearing the rope is removing the fluorine waterproof coating. Would it work re-treating the rope with something like Nixwax? (But sounds hazardous stuff).
And thanks a lot for the TOP LEVEL informative and scientific content :)
I think this coating is already gone when the rope gets dirty to the point you want to wash it.
@@iacamigevaerd376 exactly but then would it be possible to restore it ?
Great experiment!. Chalk, or the dirt increases friction in contact, so it is normal the rope wears more. If the rope was soaked in oil i suppose it would last much longer, but it would dangerously negatively impact on climbing experience. So it is fair to keep using dirty ones, but just check for damage, and cautiously decide if the rope still is good for the stress you intend to put it on for your next climb.
This ruled! Thanks y’all.
Our pleasure!
For the same Reason Carbon ropes for Kite Dragons are under no circumstances dipped into Saltwater or mud. The Salt will dry and form little crystals like the mud particles than reaming the line and splice it. So if your lines get wet in salt water or mud it is considered a total loss due to salt or other stuff that sticks in the lines.
Do you have any insight from the Mammut team if washing a Dry rope can actually remove the treatment?
Was wondering about that as well
Same question. My experience suggests that it degrades the coating (side load washer, delicate cycle, warm water, no detergent)
Washing, but particularly using the rope will very probably degrade the treatment. It's more than likely very similar if not the same as hardshell water repellency treatments.
Great test !! Thanks a lot to you !!! ...and to Mammut supporting you !!
great video, I learned something new today, thanks! I was hoping you would go into a scientific explanation of how chalk and dirt accelerate the wear on ropes. Like are dirt/chalk particles being dragged along the rope and crushing the plastic polymers, or is there a more complex explanation such as they reduce the ability for the rope strands to slide past one another and causing increased stress etc.
Great job.
I have always washed my ropes occasionally, though I might switch my detergent to something designed for washing waterproof jackets.
It also shows the durability, and therefore the value, of dry ropes.
I was not aware that dry ropes were also dirt resistant. Good to know.
What about ones with different grain sizes? Are finer chalks less abrasive?
Hi! Some factors that can affect this experiment: the tensile strength of where the edge meets the rope does not look like it was taken into account; if one rope was dug in more deeply than another rope, that will affect results, especially since it looks that point was not noticed due to how it was attached to the machine (tied).
Also, these ropes look like polyester. If the ends of the rope was melted prior to testing after being cut, this can affect results due to how the rope was twisted. Since the ends of the rope will hold the rope together, we can see that it did actually have an affect on the experiment in the "unwashed unwaxed rope" test.
Chalk, talc, and dirt all add friction to the rope, and that friction when rubbed against a rope will cause damage amongst the threads.
In what way is that surprising? You're basically slowly rubbing them on sandpaper.
It's not surprising, but it's not one of those things that are obvious either.
Honestly, thank you for making this. Now I know for when I need it in the future! Dunno when, but I know I will.
u should test different temperatures of washed ropes and whether or not u used washing detergent.. i wonder if the chemicals might effect the rope and high temperatures might weaken it? a washing machine can wash 40 c or 60c or 90c etc
I suspect going to high temps won't make it better. Usually it helps for sanitizing or dissolve greasy dirt. For ropes sounds mainly dust..
I'm not even interested in climbing but this was still interesting to watch.
Very interesting video. I've always used a damp cloth to wipe down the rope after climbing outside. It seems to get most of the dirt without the dry time. Any thoughts on this method?
Good idea I do the same because this fast snd easy method removes most of the dirt and this is pretty enough to reduce the negative abrasion effects on the rope without washing and drying
1:41
Great. New Samples. Once the water content, the grain Size distribution and the glow loss of this sample.
Thanks for the great content! I'm wondering if you talked about whether cleaning a dry-treated rope can affect the dry-treating at all? I'd be interested in knowing if the beneficial effects of removing the dirt/chalk from the rope might "even out" with a negative effect of deteriorating the dry-treatment.
Amazing video Ben! Thanks for all the work on putting this together and Mammut for assisting with the testing and info. Great stuff!
Thanks Ben, good stuff (like always).
I'm surprised - I still have the suspicion that washing made the lifespan of 2 of my ropes much shorter, since washing made them more rugged (less "fluffy") - maybe washed out the dry treatment (yep, used very little light detergent, dried correctly, did tumble on 400rpm). Totally doesn't match your experiment :)
I think you can trust the guys from Mammut on this one..
Nice tests thnx!! However the conclusion about the extra wear at the rope ends because of chalk is very far fetched as the usual spot for the extra wear is 1 to 2 meters away from the knot and where you touch it the most. It's simply the repetitive falling on the same spot. When you think about it that spot where you touch it the most actually rarely touches the rocks
Her laugh is the most happy one I’ve ever heard, I love it 😂
😵💫
9:39 "Holy macaroni" I'm absolutely in love with their accent
Subbed. As you were talking about wanting to test the effects of water on rope, I thought of Ryan's channel. Then you mentioned that y'all are friends. Cool. Can't wait to see the next video!
Guess this could also apply to winch ropes. Mud riding soaks the whole rope in dirt and mud and it scrapes against the fairlead plate. Guess it explains why they only last one season on average.
4:00. So glad a pause for heat was considered! Thought it would've been something looked over!
A good mild detergent for handwashing would be dish soap like Dawn.
Mild detergents for washing machines will be labeled something like "gentle" or "for sensitive skin".
As much as I liked climbing and repelling, I can’t do it anymore. I’ve always loved carabiners for some reason. I use them for just about anything you could think of. If I’m at a store that carries climbing gear, I have to go look and see if they have any unique operating ones I don’t have or haven’t seen.
I washed my first rope, a 9.8mm Mammut. I hand washed it in a tub of warm water, no soap. Then rinsed it several times. It definitely lasted way longer as a result. Not sure if I'd use a washing machine or not and I definitely wouldn't use soap. But that's just my experience.
Can you remember - did you see much dirt etc. in the water you washed with? Did you see a change in your rope's appearance (ie. colour)?
@Nathan Taylor the rope just looked cleaner afterwards. I definitely got dirt and dust out of it because the water was dirty. Which is why I carefully rinsed it a couple times. It was like washing a dirty pair of trekking pants. They just feel softer and nice and clean afterwards.
Everytime I take new climbers out I tell them please don't step on the rope and everytime they step on the rope. Definitely sending this video out
I dont give a shit about climbing or the science behind the tools used, but the way you approach the questions, it feels like a documentary 😮 subbed
Was taught about keeping rope clean thirty years ago volunteering in a search and rescue unit
as I know the first fall with wet dynamic rope is OK, but after that the rope turns to static untill it returns to dry
17:16 "What is a mild detergent?"
Thank you so much for asking that question!!!!!
I'm asking myself that question since the last 20 years, seriously!
Next time it would be good to have replicates within the experiment
I've never climbed, I have no interest in climbing, and I have never watched any climbing videos before. But here I am watching a 20 minute video on climbing ropes and I'm enjoying every minute of it.
Hey Mammut...I'm in the market for some new rope (a 60m for sport climbing and a 30m for ski mountaineering)...and I'm going to buy Marmut rope specifically because of the assistance you have provided to this channel. Thanks!
Thank you for posting this excellent video! I've long been an advocate for washing climbing ropes frequently. I hope this video will encourage more people to do it 🙂
TH-cam recommended can really make us all climbing enthusiasts.
I don't climb or use ropes in any capacity, but the nerdy deep dive was delicious.
How about the abrasion on that edge? Running ropes over it hundreds of times is gonna blunt the edge, which will skew the results too.
I love science. This makes me think of the straps used to secure heavy loads on semitrucks... while we strive to secure freight to be as secure and immobile as reasonably possible, inevitably every load is subject to constant vibration and the straps undergo constant turbulence.
These straps are never washed except for the rain and can become dry rot.🤔
Washing my ropes regularly (in standard laundry machines) since 15 years, since muddy conditions are most use scenario for me. this video hopefully end the old rope washing dispute
Thank you! What a really good video, I really enjoy seeing this type of content because it is very valuable to the community
Washing ropes should lead to chalky deposits caused from water.
Would be interesting to see if a rope that is washed 10 times has an other effect than one that’s only washed one time!
It's amazing how many people don't realise why they should pay extra for a good Vacuum cleaner for their Carpets, dirt in carpets does exactly the same as it does to the rope.
It's also why you should have a good mat for people to clean their shoes on before entering the house and keep the mat clean as well :)
Makes sense that the rope designed to resist abrasion has a smaller difference between clean and dirty.
0:59 AYOOO that's a Mercadona plastic bag you ain't fooling me, sneaky sneaky
1:44 makes an epid reference to classic 2k's TH-cam YTPMV... Nobody else appreciates the deep cut reference* the story of my life... I feel the pain
A question about washing I haven’t found anywhere else - how do you know when it’s dry? Just because it’s dry to the touch does not mean the core is dry! It will dry from the outside to inside is my understanding.
Great to see this! Thank U! And I must say, the Ladies of Mammut!! WOW!!
14:27 that was a clean victory
I dont have any clue why i watched this video becuz i have nothing to do with ropes, climbing nor dirt. Guess YT algorithm kicked in. Great vid!