I’ve been watching you for so many years now, you’ve gone so far, I remember when you never even had it in your mind to do a drift competition in that car 🤣 I watched all your food, deliveries and everything😂
Nico I’ve been watching you for quite a while and you are genuinely the TH-camr that I get most excited for when you upload. I checked your channel today not realizing you had uploaded because I hadn’t gotten a notification in awhile😂 Please don’t be too hard on yourself for not having made as much content! I absolutely love your videos and I think the best thing you could do is have a more vlog style of videos just documenting what you’re doing on any given project if you’re working on something and of course the driving whenever you can share it!
Put studs instead of bolts on the rear wheels. Your bolts were torn off, my wheel was also torn off because of this. I put studs and made sure to weld them on the back side. The hub is very thin and there are few threads, I think because of this
Yoo I think you should keep the same format you have been doing over the years but just add little sneak pics here and there. I think is cool to have a vid dedicated to each car rather than having one for all
Hello Nico, I've been fighting a misfire in my e36 for almost a year now and at a loss. I've narrowed it down to the fact the car seems to only register the first fuel bank in the ecu as it was previously turboed, I've tried multiple different tuned ecu's, and everything down to the plugs, multiple crank sensors and all that has been had multiple thrown at it. The whole engine harness was swapped as it didnt have front o2's. The timing was off a tooth and just finished getting done.. and it didnt change the problem, let alone change how the car ran at all. Most of that is all back to stock and it still wont show a second bank which causes an odd misfire under max load after a certain duration, if car is turned off the car will reset and the car could drive without issue until it goes under max load again and after a certain duration but the duration seems to get shorter as the car repeats this and gets hot I think i dont know (but for example trying to push the car through an event it seems to come back quicker).
@@HoonGarage Yea the compression test came back pretty odd the numbers were all over the place but the car doesnt show signs of that. Thanks for your response.
@@HoonGarage Do you have any idea why the car would only be showing me 1 fuel bank when im trying to read the fuel trims on multiple different tuned ecu's?
love the channel bro. Here for any content you make! You were a big motivator for me to get on showtime with my new drift car. I suck currently but maybe one day we'll run tandems or something!
Can we get more videos please 🥺 Drifting, wrenching, etc. No need for daily or even weekly uploads just an upload every month or two is all we askin for.
bro that was amazing drive i love it . I have a question for you ive 318ti with m44 engine, what engine do u use on e36 . İm thinking swap engine or turbo it what do you think
Hey bro random question. I’m swapping a 2JZ-GTE into my IS300 real soon and was wondering if you got any advice for me ? Like, if you were gonna do it all over again, what would you do different ? What should I watch out for so I don’t blow it up within a year ?
@@HoonGarage An exhaust valve blew yours up, wtf? Thanks for the heads up. You’re 100% right about using my stock GE, honestly I didn’t even wanna turbo it. Blew my stock W55 trans and was looking for a replacement… found a GTE with a CD009 and adapter kit for 6k Canadian $. Couldn’t pass that up lol. Guess I’m going all in now 🤷🏻♂️
Shouldn't you keep the car ON while using the fan? I suppose coolant will not flow if car is off🤔 else it'a cooling the coolant in the radiator only🤔🤔🤔
A HOON GARAGE UPLOAD NO WAY
Fr after a million years
I be smiling and shi😂😂😂
He comes back with milk like a deadbeat dad 😂
I’ve been watching you for so many years now, you’ve gone so far, I remember when you never even had it in your mind to do a drift competition in that car 🤣 I watched all your food, deliveries and everything😂
Man I remember when this guy was consistent, Always loved the parking lot drifts n stuff, Hope to see more soon!
Going straight to the FD league, I can feel it
Dude you are literally a one man show from what I can see, upload when you have time. Take your time and stay gold. Can’t wait for the next update.
Been watching for a couple years. Seeing videos like this make me all the more excited to get in a stock e36 and start sliding
We got hoon drift comps befouh gta 6
take your time coming back brotha we love you🗣
Nico I’ve been watching you for quite a while and you are genuinely the TH-camr that I get most excited for when you upload. I checked your channel today not realizing you had uploaded because I hadn’t gotten a notification in awhile😂 Please don’t be too hard on yourself for not having made as much content! I absolutely love your videos and I think the best thing you could do is have a more vlog style of videos just documenting what you’re doing on any given project if you’re working on something and of course the driving whenever you can share it!
Hoony uploaded love it! Never thought I miss a video from you so much boi ❤️.
Many greetings from Germany 🇩🇪
MORE GARAGE ENGINE BUILDS / MODS
hell yea niko. cant say ima day 1 but u came a long ass way bro n no fake luv shi but im proud of u
🔥🔥🔥 HOON DAY IS GOOD DAY 🔥🔥🔥
At what PSI did you run the cosmos man? Anyway amazing video brother
I ran them at 40psi this event to keep my clutch happy but the 205/50 was definitely the move. Really like that size for stock power.
Put studs instead of bolts on the rear wheels. Your bolts were torn off, my wheel was also torn off because of this. I put studs and made sure to weld them on the back side. The hub is very thin and there are few threads, I think because of this
You are awesome! Keep re-inventing yourself!
4th place let's go!!!!!! 1st comp, and you were top 5! Nice job!
Yoo I think you should keep the same format you have been doing over the years but just add little sneak pics here and there. I think is cool to have a vid dedicated to each car rather than having one for all
ROBBED!! Your such a good driver bro and def my biggest inspiration for e36
Hello Nico, I've been fighting a misfire in my e36 for almost a year now and at a loss. I've narrowed it down to the fact the car seems to only register the first fuel bank in the ecu as it was previously turboed, I've tried multiple different tuned ecu's, and everything down to the plugs, multiple crank sensors and all that has been had multiple thrown at it. The whole engine harness was swapped as it didnt have front o2's. The timing was off a tooth and just finished getting done.. and it didnt change the problem, let alone change how the car ran at all. Most of that is all back to stock and it still wont show a second bank which causes an odd misfire under max load after a certain duration, if car is turned off the car will reset and the car could drive without issue until it goes under max load again and after a certain duration but the duration seems to get shorter as the car repeats this and gets hot I think i dont know (but for example trying to push the car through an event it seems to come back quicker).
I’d try changing out the coolant temp sensor also run a compression and leak down test and boost leak test
@@HoonGarage Yea the compression test came back pretty odd the numbers were all over the place but the car doesnt show signs of that. Thanks for your response.
@@HoonGarage Do you have any idea why the car would only be showing me 1 fuel bank when im trying to read the fuel trims on multiple different tuned ecu's?
man me and the boys love your videos. absolute dream build e46
i‘d really love to see the e46 jdm3 more often and also the oldschool streetdrift stuff you‘ve been doing (or compound)
compound is gonna be a while unfortunately, cops have it shutdown for the time being smh.
@@EthanDrifts THAT IS GAY!
Man, stay strong❤
love the channel bro. Here for any content you make! You were a big motivator for me to get on showtime with my new drift car. I suck currently but maybe one day we'll run tandems or something!
"I'll be driving this car with a remote control for maximum weight reduction"
Eyy just moved to the area and went to showtime my first time 2 months ago, going to go back down there soon hope to see you there
No way bro found his TH-cam login. Sick skids and definitely keep us updated on all projects more often pls
very nice and clean drifts budy keep going
you're awesome bro, i hope you keep posting
"i've been failing you guys as a channel creator" nah bro u doin just fine💪 ur just a human aswell👍 just do what u do ill watch every video anyways
Can we get more videos please 🥺
Drifting, wrenching, etc.
No need for daily or even weekly uploads just an upload every month or two is all we askin for.
always have loved the content dont think your failing your fans g
Nah bro lost me when he said he wont eat for maximum weight reduction 😂
bro that was amazing drive i love it . I have a question for you ive 318ti with m44 engine, what engine do u use on e36 . İm thinking swap engine or turbo it what do you think
missed you buddy
3:02 “then your gonna come around here”
LETS GO E36 MAKING IT TO THE BIG LEAGUES
You NEED to get a m3 bumper man, Love it tho!!
Was all those laps 2nd gear with 391?
2.93
I didn’t get the notification! So glad I checked on the channel!
Love these vids keep it up from the UK!
I missed you. Post more plz🥺
Siiiiiick 🔥🔥🔥🤌🏽🤌🏽🤌🏽🤌🏽🤌🏽😂
Hey bro random question. I’m swapping a 2JZ-GTE into my IS300 real soon and was wondering if you got any advice for me ? Like, if you were gonna do it all over again, what would you do different ? What should I watch out for so I don’t blow it up within a year ?
Do not get an exhaust valve that’s what blew mine up lol if I was you I’d just get GTE internals and toss them in instead of an entire engine.
@@HoonGarage An exhaust valve blew yours up, wtf? Thanks for the heads up.
You’re 100% right about using my stock GE, honestly I didn’t even wanna turbo it. Blew my stock W55 trans and was looking for a replacement… found a GTE with a CD009 and adapter kit for 6k Canadian $. Couldn’t pass that up lol. Guess I’m going all in now 🤷🏻♂️
can't wait for the e46 m3 videos again
Got the noooodle. Smoooookin'
So many projects definetly are time-eating. Maybe u need a friend to make the videos while ur working
Shouldn't you keep the car ON while using the fan? I suppose coolant will not flow if car is off🤔 else it'a cooling the coolant in the radiator only🤔🤔🤔
Good stuff btw🤩
U should start a series for each car build
what diff you running? 391?
2.93
@@HoonGarage i took mine out couldnt handle it that fast. guess ill get better and slap it back in! lol
No outro edit 😢
gotta start adam lzing it with the builds 😂
Missed hoon❤
Finally, a NEW VIDEO!!!
Please install an m50 intake!! It will improve it by a lot!
WOOOO FIRST LOVE YOU BRO
LESGOOOO DUDE(from France)
you should watch some PrizzaMike videos and take some inspiration from his videos. you two are my fav car TH-camrs by far
(in terms of keeping us up to date with builds)
not eating because of weight reduction is insane :D
we need Nico in FD asap
❤❤
Yuh
Ima need a DoorDash vid
i dropped down to 205/50 on my e46 best decision of my life
yo hoon love you brother
IM COMMENT 69 🥶🥶🥶
Get a halo chief voice changer, teach people how to do an engine swap in the voice, and don't edit any of the video, so it's like an hour long 😎
Here😂
😫
DO MORE DOOR DASH
Honestly, dude, just hire me as a video editor; I would love to help edit your content.
4th
Same