Awesome job !!! Love your channel. I say a prayer for your son and family every night. I had a 2013 Camaro ZL1 but G.M. had to do a buy back on it because I went through 6 supercharger's and 3 set's of exhaust and I was going to buy the 2018 ZL1 but I went with the 2018 Jeep Grand Cherokee Trackhawck that I pick up mid December. I will still be following your channel for sure..
Lethal Garage is it possible to put it on without the rivets.. I’m not a fan of drilling into the car. Or do you know of another set of carbon fiber side skirts that use that oem mounting spots.
Looks good just one suggestion though just to be on the safe side when you install them put some blue painters tape on the carbon fiber part when you are drilling and putting in the rivets. Just a little bit of cheap insurance
Hi lethal, I messaged you in another video and about this specific problem not enough space to drill @ the end of each side you recommend to take off the tires but it wouldn't work so just saw that you ran into the same issue, we are neighbors city wise, but going to wait on install cause my rivets don't fit the 3/16 now that I saw you I'm going to try and make it work somehow, cause it leaves a nice gap so I wanted to know if you recommend any type of 3M tape or metal to plastic welding❓️❔️
Hi Matt !!! I’m finally getting my extreme online carbon fiber side skirts installed tomorrow this video was very informational I am going to a professional shop but I love to give them feedback on if certain holes are going to be hard to get to work!! Vanessa.
Matt ? Did you use the phastek side skirts b4 ? I could’ve swore you did ! And if so are they any good ? Need to know cause I’ve done research on phastek and extreme on line performance too and ACS too ! And ACS being the most expensive and 2nd extreme on line was 2nd expensive! The best price for un painted side skirts and front lip was the best price for the dollar ! Just need to know if you used phastek ?please a quick response needed buddy appreciate your help on this !
They are now producing a Satin Black for us 1LE owners. Their website says they are “ready for prep & paint.” Does that mean they have to be painted prior to installation? Thx in advance.
Where can I find a nice carbon fiber body kit for my 2018 v6 Camaro Rs redline edition? Most sites are only offering for the as models. Also a question I have is (can the ss kits fit a v6 model? It’s the body of the car the same?
😎🇺🇸👍 those are some beautiful carbon fiber side skirts. I think the trick to a good pop rivet install is running the tool flush with the head of the rivet before squeezing off the trigger, do you agree? Nice 👍 job great video 🍷cheers!
Please do a video on side scoops! They make cars look like beasts imo but am having trouble finding them for 6th gen camaros. Is there a place to get them custom made?
I've installed probably over 5000 rivets . So what can happen is they can bind up in weird spots and they will break like they did in your video that just as called s*** happens also sometimes the rivet gun doesn't grab it right and it will break it prematurely again should happens nothing you can really do about it but try to make sure your rivet is tight in its housing what I mean by that is that the bottom the point at which is being placed into the hole that bottom is flush up against the housing and that your rivet gun is placed firmly up against the top of the housing. Other than that s*** happens you can use a Dremel or just leave it it's not like it's going to do anything
Awesome job !!! Love your channel. I say a prayer for your son and family every night. I had a 2013 Camaro ZL1 but G.M. had to do a buy back on it because I went through 6 supercharger's and 3 set's of exhaust and I was going to buy the 2018 ZL1 but I went with the 2018 Jeep Grand Cherokee Trackhawck that I pick up mid December. I will still be following your channel for sure..
Lethal Garage is it possible to put it on without the rivets.. I’m not a fan of drilling into the car.
Or do you know of another set of carbon fiber side skirts that use that oem mounting spots.
Thanks for the video, I knocked out the install of my C7 skirts last night, and this definitely made it go faster!
Looks good just one suggestion though just to be on the safe side when you install them put some blue painters tape on the carbon fiber part when you are drilling and putting in the rivets. Just a little bit of cheap insurance
17 minute video, 5 seconds of what it looks like -- at the end, and in the dark. Bravo
they look really nice , those side skirts really accent the sides of the car
Those look sweet! Awesome install guide. Used this for similar side rockers that i bought
Hi lethal, I messaged you in another video and about this specific problem not enough space to drill @ the end of each side you recommend to take off the tires but it wouldn't work so just saw that you ran into the same issue, we are neighbors city wise, but going to wait on install cause my rivets don't fit the 3/16 now that I saw you I'm going to try and make it work somehow, cause it leaves a nice gap so I wanted to know if you recommend any type of 3M tape or metal to plastic welding❓️❔️
Can I buy those screws at my local shop like hom depot ?
Matt, as usual great job. Question, is it possible to use 3M double faced tape in place of the rivets. What's your opinion.
Ray
Hi Matt !!! I’m finally getting my extreme online carbon fiber side skirts installed tomorrow this video was very informational I am going to a professional shop but I love to give them feedback on if certain holes are going to be hard to get to work!! Vanessa.
How did it work out for you?
Matt ? Did you use the phastek side skirts b4 ? I could’ve swore you did ! And if so are they any good ? Need to know cause I’ve done research on phastek and extreme on line performance too and ACS too ! And ACS being the most expensive and 2nd extreme on line was 2nd expensive! The best price for un painted side skirts and front lip was the best price for the dollar ! Just need to know if you used phastek ?please a quick response needed buddy appreciate your help on this !
did u had any gaps?
Has C7 reached out to you about the rivet points on the ends? That looked impossible to reach without damaging something.
You should do a review/install of the gm footwell lighting kit
How much does it cost to install a carbon hood on my camaro. I am trying to upgrade it
Matt should do a beard edge up tutorial. His beard is always on point 😂
Wanna install rockers splitter diffuser and wing on my camaro LT1?
Do I? Unfortunately no, don’t even have time to work on my own cars?
@@Lethalgarage haha it was worth a shot 😂
They are now producing a Satin Black for us 1LE owners. Their website says they are “ready for prep & paint.” Does that mean they have to be painted prior to installation? Thx in advance.
You ever find out out if you gotta paint it? I recently got a 2017 1LE
TrigunVS ordered mine they come in satin finish to match hood color 👍
Appreciate the video I’m looking into getting this mod. Just out of curiosity what size drill bit and type did you use before the rivets?
Nice work. Those look wickedly good.
Do a review on the e85 Camaro with exhaust clips and pulls!!
Matt, those are Dope ! Love your vids man!!!! Ray
What size was it for the drilling ??
Hey Mat not shore if I missed this but, how do you know how far apart to drill for the rivets ?
Has marks
LethalGarage oh man awesome and thank you for getting back at me , I’ve been following your before I even pick up my 2017 1SS
You know a place to order the screws
Im installing the same side skirts. What type of rivets are you using? Are they aluminum?
Where can I find a nice carbon fiber body kit for my 2018 v6 Camaro Rs redline edition? Most sites are only offering for the as models. Also a question I have is (can the ss kits fit a v6 model? It’s the body of the car the same?
😎🇺🇸👍 those are some beautiful carbon fiber side skirts. I think the trick to a good pop rivet install is running the tool flush with the head of the rivet before squeezing off the trigger, do you agree? Nice 👍 job great video 🍷cheers!
Please do a video on side scoops! They make cars look like beasts imo but am having trouble finding them for 6th gen camaros. Is there a place to get them custom made?
justin colburn check out American Authorite
Cory Straeter didnt find them?
Love your installs dude!
Can you do any work on a G8 of 2015ish chevy SS by any chance?
I have no plans to cover the G8
LethalGarage , would be good to see your install videos on them
I Come from Burkina faso.i have a camaro2010.i want louvers and it.can you help me?how must?
U should do installs in the 5th gen
Will this fit to a 2018 camaro RS?
It should
One bad camaro man, how do you pass smog in Cali? Im still trying to figure out how i can do that when i put mods on lol
ThezKiKi he won’t need to for at least another 6 years lol
Those Carbons look killer. Alot of Carbon looks "grayish" . These look like a more BLACK Carbon. Me Likey!
Looks damn good Mat. You going to install mine when I get them?😁
Installing black side skirts, on a dark grey car, at night, in a poor lite garage. kinda hard TO SEE...
Hey bro can you tell where he got the hood I really like get that for my camaro
He made it...
LethalGarage does he sell them? Lol
looks exactly the one I've bought on amazon for a cheaper price
Cool video if you ever need a guinea-pig I have a 2018 ss1le😁😁
No a fan of the open underside of these. Reminds me of the acs ZL1 front splitter. Just for looks
That price point tho.... I have to have them!!
I've installed probably over 5000 rivets . So what can happen is they can bind up in weird spots and they will break like they did in your video that just as called s*** happens also sometimes the rivet gun doesn't grab it right and it will break it prematurely again should happens nothing you can really do about it but try to make sure your rivet is tight in its housing what I mean by that is that the bottom the point at which is being placed into the hole that bottom is flush up against the housing and that your rivet gun is placed firmly up against the top of the housing. Other than that s*** happens you can use a Dremel or just leave it it's not like it's going to do anything
Damn, he said $475 back when this was made. They're almost $750 now
What? No after video??
Urrg...
I love it very good my boy
$55 for shipping? damn...
Oversized box is oversized
LethalGarage any lethal discounts from them?
Unfortunately no
It's $55 to Alaska, that's a deal. I had to ship rims down south and bring them back in my checked luggage to avoid hundreds in shipping cost.
Silly waste of money $.
I disagree