Changing the blade on a miter saw

In this video we will change the blade on the miter saw.
#kevinrobinson6688 #MiterSaw #ChandeMiterSaw
IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 24T amzn.to/2Z3d2Tt
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
Keep it real & clean.
Help Support My Channel paypal.me/kevi... Thank You.
Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123

[@dmwagnersalisbury]

Thanks, Kevin! I misplaced my manual and thanks to you I switched the blade in about 5 minutes!!

[@Robinson-Homestead]

Glad to help thanks for the comment and watching.

[@BBQ_kevin]

Thank you. It is not my saw, but you told me what the instructions were not. I needed to find the blade lock, and after that, tighten my blade fine, and my saw was back up and cutting again.

[@Robinson-Homestead]

Thanks for watching, glad i could help.

[@staceymilochik6750]

Thank you!! I was going crazy trying to figure it out with the manual but you made it super easy!!

[@Kalixadam9977]

Kevin you saved my cutting day!!! 🎉 thank you sir 🫡🙌🏻

[@Robinson-Homestead]

Thanks for the comment glad to help.

[@brswggr]

Thanks for this! I inherited a similar miter saw recently and couldn't figure out how to change out the blade. The thing must be 30 years old. Your video was exactly the guide I needed to figure it out.

[@Robinson-Homestead]

Thank you so much for the comment glad to help.

[@Anthanos89]

Thank you so much. Perfect instructions for an Ozito mitre saw.

[@Robinson-Homestead]

Thanks for the comment glad to help.

[@gomezfriesen]

Thanks!
Done!

[@Robinson-Homestead]

Your welcome glad i could help

[@dm19609721]

Thanks, great video! Manual was horrible.....you made it look easy

[@Robinson-Homestead]

Glad it helped! thank you for the comment Dennis M.

[@brianhong4413]

Thank you so much. This was the perfect video for changing the blade.

[@Robinson-Homestead]

Thank you glad to help Brian

[@dayslumber]

So much great info packed into a short video!

[@Robinson-Homestead]

Thank you so much for the comment and watching hope it helps.

[@perryarmstrong9586]

Thank you

[@Robinson-Homestead]

You're welcome thanks for the comment and watching.

[@wlodekcyranowicz8707]

Thank you. I now now was not sure.

[@Robinson-Homestead]

Thanks for the comment glad to help.

[@debragary6063]

I have a small maitre saw which I have really abused over the years,, and never changed the blade. I can now take the old one to Lowe's and replace my blade. Thanks for the video!
Debra

[@Robinson-Homestead]

Thank you Debra you can do it.

[@onsturn]

My 10” Craftsman had a 1/2” nut instead of the allen head screw. I’d like to add that laser attachment to mine. Thanks for the vid!

[@Robinson-Homestead]

They are great to have it really helps.

[@marcoc4419]

Just the video I was looking for
Thanks

[@Robinson-Homestead]

Thanks for the comment glad to help

[@wanda2080]

Thank you! I just bought my first mitre saw and was nervous on how to change the blade. This was a great demonstration.

[@Robinson-Homestead]

Thanks you Wanda

[@robertstange8665]

I can't thank you enough for this video. It took me longer to walk out to my woodshop than it took to take blade off. I've ordered new blade, and had to order batteries for the laser light. In my area batteries(3) are hard to find.....GPA 76. You've put a smile on my face....Thanks again....

[@Robinson-Homestead]

Glad I could help I did a video on the laser light to if you need it
th-cam.com/video/1sf4Bw6aTMs/w-d-xo.html

[@robertstange8665]

@@Robinson-Homestead Yep I got the old batteries out.....just had to order them GPA 76.....Couldn't find them locally. Thanks again for the videos....

[@Robinson-Homestead]

@@robertstange8665 I had to go to Lowe's to get mine

[@socorrogallegos9914]

Wonderfully done!

[@Robinson-Homestead]

Thank you for the comment.

[@Hatch61]

Regardless of the tool, don’t you just love a new blade. Helpful video Kevin, thanks for sharing it. Be well my friend.

[@Robinson-Homestead]

That's for sure Hatch thank you for the comment.

[@bobbylowski9691]

Hatch is another Mass man! Lol I watch your videos also pal, I recently moved to Brockton but I'm originally from South Boston Mass...
Great videos too bud!!!

[@oiseaudenuit]

Very good video thank you! Came here before changing it!

[@Robinson-Homestead]

Thank you for the comment and watching glad to help.

[@chrishendrix8278]

Thanks so much for the easy instructions!

[@Robinson-Homestead]

Your welcome glad to help thanks for the comment and watching.

[@curtisbriand4265]

Great guidance. Ty😊

[@Robinson-Homestead]

Thanks glad you liked it.

[@TheWoodHaven]

Man, I need you to do a video on how to find your allen wrench so I can change my blade.

[@Robinson-Homestead]

Lol thanks for the comment Daryl.

[@chriswilliams5498]

Thanks for vid. I was a bit stuck. New blade now on and clearly my old blade was very dull. New one cuts like you say. Hot knife thru butter

[@Robinson-Homestead]

Thank you Chris glad to help.

[@Bob1Mack]

Thanks, mate. I'll be doing this for the first time tomorrow morning. You're a great help.

[@Robinson-Homestead]

No problem and thanks for watching

[@Michael-bv1nq]

Just joined your channel thank you for your time and videos

[@Robinson-Homestead]

Thank you for watching

[@fredwilhite423]

I haven’t changed my blade in years and didn’t remember the steps! Thanks for the video. I have the exact same saw

[@Robinson-Homestead]

Glad I could help! thank you for the comment Fred.

[@ernestomartinez4443]

Haha, thanks for the video. Was not understanding the instructions but then I saw this vid and it all made sense. 👍

[@Robinson-Homestead]

Glad it helped!

[@helmutcallin4474]

This saved me a lot of time
Thanks

[@Robinson-Homestead]

Your welcome

[@rrr7967]

Amazing !!!! Thank you so much for this ... I didn’t even realize there was a “side button” to lock the blade ... I was stripping the hex nut abs getting frustrated. Thank you !

[@Robinson-Homestead]

Thanks for the comment and watching

[@stillwalking64]

Thanks a lot sir I've been building and things for over 20 years. My problem I haven't had to change a blade in that length of time and I needed to know the direction to loosen it. It was just really tight thanks a lot my friend

[@Robinson-Homestead]

Glad I could help thanks for the comment and watching.

[@kortniewithak5885]

Thank you! This is my first time using a Miter Saw and I had no idea what I was doing trying to put a new blade in my new saw 😅

[@Robinson-Homestead]

Glad I could help!

[@mikaylaclark5829]

Thanks. Helpful

[@Robinson-Homestead]

Thanks for the comment glad to help

[@robertgustafson3258]

Thanks, you gave me the info i needed concisely and expertly. I'll subscribe to your channel.

[@Robinson-Homestead]

Thank you Robert glad I could help thanks for subscribing.

[@rubenvargas3547]

Thank you sir, going to do this Saturday 👍

[@Robinson-Homestead]

glad to help

[@sirkid8553]

Thanks for the video, glad I found this one first =)

[@Robinson-Homestead]

Thanks for the comment glad to help.

[@PaulDGreen-bu4iz]

Nice to know Kevin! Thank you for sharing!

[@Robinson-Homestead]

Thank you Paul.

[@explorer867]

Good instructional video Kevin.

[@Robinson-Homestead]

Thank you Explorer.

[@bobbylowski9691]

ANOTHER informative video, good stuff pal! Spoke to Daryl today and it's honestly an honor that you guy's even know who I am because YOUR VIDEO'S are literally the 1st I started watching and basically the main reason that I got hooked on TH-cam videos! 😂👍✌️

[@Robinson-Homestead]

Thank you for watching and the comment Bobby my friend.

[@jmccracken491]

Good video much needed information.

[@Robinson-Homestead]

Glad it was helpful! Thanks for the comment Jim.

[@ariw9405]

Thank you this was very helpful

[@Robinson-Homestead]

Thanks for the comment and watching glad to help.

[@Reform_With_Carnivore]

Thanks

[@Robinson-Homestead]

Thank you for watching and the comment

[@godsfilmmaker8863]

Beautiful video! Worked great for me. Only difference was I have an older saw with a normal bolt (not a hex wrench).

[@Robinson-Homestead]

Glad it helped

[@dmwagnersalisbury]

Same here! Worked great.

[@fantastic40s]

Thanks Kevin! Very helpful for a newbie like me :-)

[@Robinson-Homestead]

Happy to help!

[@scottrichards8914]

Great video. The other one I saw said take the cover completely off. When I did that the spring came out and I can’t get the protection cover spring back in. Any suggestions or a video on that? Really appreciate any help.

[@williammcnabb1354]

This is exactly where I'm at right now. I'm heading out to my shop to try a different strategy. But this video is extremely helpful. Thank you :-)

[@jamesjacobsen9501]

I was hoping you would make a note of which direction the blade is supposed to turn

[@Robinson-Homestead]

The Edge goes to the saw on the bottom.

[@williammcguire3rd]

Nice tip video! Keep them comming. Lean alot from ya!!🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸

[@Robinson-Homestead]

Thank you William.

[@nennguyen7557]

good. job

[@Robinson-Homestead]

Thank you Nan Nguyen.

[@kirkin2006]

3:25 I removed the screw but cannot remove that washer, it looks stuck on the blade. What could be the issue? Many thanks,

[@Robinson-Homestead]

Hit it with something.

[@kirkin2006]

Hit it from behind with a rubber mallet. It worked!. Thank u Sir @@Robinson-Homestead

[@jmax5105]

Is there a way to tighten up the blade brake on these saws? Mine is almost to the point that it doesn't even stop the blade at all now... Is that something close to where you were working in this video?

[@Robinson-Homestead]

I'm not sure mine doesn't have a break.

[@winstonallick3914]

How can i get oñe bolt fòr my chop saw charft man

[@Robinson-Homestead]

You might have to contact the saw manufacturer about it sorry i can't help.

[@ventureclearly4one]

What is the model number on your unit? My guard is missing and the identifying sticker is not Legible. Thanks

[@Robinson-Homestead]

Model 315.243130 It has a customer help line to
1-800-932-3188 hope this helps thank you for the comment and watching.

[@dougmiller4382]

Adjust Tuscany tub faucet

[@Robinson-Homestead]

Thanks for watching

[@rogerlunn7599]

What size Alan head on blade bolt

[@Pete.Ty1]

👍

[@Robinson-Homestead]

Thank you Pete.

[@debragary9760]

Can you add a palm sander to your Amazon store? I need one for the work on my Runaway Camper and want to get one from you.
Debra