Fun application.... as a person who has been in the pressure sensitive label business since 1973....omg I’m old.... we’ve been doing smaller “stickers” these many years.....71 and still working 40 hr weeks.... hint: when you cut that hinge, fold over about an inch or so of the liner so that when your done with the first half...there is a little inch or so of handle to pull the second half of liner....great video great look on your boat....
Great video as always brother, also for older boats wiping the area down with a little rubbing alcohol on a rag will make sure any grease or oils are gone and promote better adhesion. Keep it up mang!
I done some decal work, removing and installing so I know that wasn’t as easy as it looked, those ribs had to be a pain. But it sure looks on your boat!!!
I built a "junk drawer" that goes under the seat on my kayak, and it's covered with stickers from products I use, channels I watch, etc...it sports a Fishin N Stuff sticker on it, too! :) High quality, good looking sticker, if anyone's wondering!
This vinyl should have air-egress. Or channels in the back of the vinyl. Dry apply it. U can also hit it with a heat gun. Make sure its laminated also. That gives it an extra UV protection. Any questions just Holla . Great job! On the application fluid use a few drops of 90% rubbing alcohol with johnson baby shampoo. This. Will increase evaporation of the fluid. Just a spoonful. And like 3 drops of shampoo.
It came out pretty good, I really like it . It does have a UV clear layer , the smaller one has it too . I needed you before I installed it lol sounds like you know your stuff
You have to check with Katfish on the price I hit my Fishin N Stuff decal from them , the SeaArk decal is made by SeaArk , they won't do anything with trade marks on it
no new channel here the fish's are really scared now lol of you seeing the swimming away laugh at the boat lol all they want for you is the 200 dollar lure they are stealing from your all they care for they will mount it and put it up on the trophy wall lol
That's cool. That's a good tip to hinge it and spray water.
That was awesome. Love them decals. It really dresses your boat up, way more than the factory decals. Thank you for sharing.
Thank you Sir
Your boat looks real good with your new decals. Have a great day, stay safe and be blessed
Thank you i really like it
That SEASHARK decal is AWSOME! You made me laugh when comparing the before and after! !
Fun application.... as a person who has been in the pressure sensitive label business since 1973....omg I’m old.... we’ve been doing smaller “stickers” these many years.....71 and still working 40 hr weeks.... hint: when you cut that hinge, fold over about an inch or so of the liner so that when your done with the first half...there is a little inch or so of handle to pull the second half of liner....great video great look on your boat....
Love your sense of humor!!! The decal looks great!
Thank you Sir
This is going to be real helpful for me when I start laying new decals on my Toy Hauler, Thank You!
Yes Sir thank you for watching
@Fishin N Stuff another great and informative video! Keep doin what you do! 👊
Man that decal just set that boat Off. I've been wanting to put a wrap on my OLD yes old boat. Great video Keith.
They do change em
As always you did an excellent job. You are certainly a very talented man.
I'm glad you made this video, I wish a bunch of locals would watch this 🤣
Man Keith that is too dang neat brother. I always wondered how that was done. Now I know.
Thank you Sir
I've used Windex to put stickers on company vehicles for years with zero issues. Never out a sticker that big on but the Windex works.
I'll try that
Absolutely fantastic video thank you for sharing my friend just order my decal $4.00 and free shipping can’t beat it
Thank you brother i really appreciate that buddy
Great video, & good times. Cool decals!!!
Great video! This video did make it look easier than it really is. I've done smaller decals, & they are NO fun!
Wish I would’ve seen this about a year ago. Great video.
Great video as always brother, also for older boats wiping the area down with a little rubbing alcohol on a rag will make sure any grease or oils are gone and promote better adhesion. Keep it up mang!
You definitely have topped yourself ta day best video
Thank you Sir
That's a awesome decal and IAM going go check out ur and ur wife's channel
Luv the video I’ve learned so much. Next time add alcohol to your mix. Helps the decal set up faster.
That makes a lot of sense
I done some decal work, removing and installing so I know that wasn’t as easy as it looked, those ribs had to be a pain. But it sure looks on your boat!!!
I like it man , now my boat almost looks as good as your boat
Fishin N Stuff 🤣🤣🤣🤣 you’re to funny!!!
I built a "junk drawer" that goes under the seat on my kayak, and it's covered with stickers from products I use, channels I watch, etc...it sports a Fishin N Stuff sticker on it, too! :) High quality, good looking sticker, if anyone's wondering!
Thank you you brother i appreciate that
Very helpful, thanks for sharing dude!!!
Hey Keith I ordered my shirt and decal and can’t wait for them I’m putting the decal on my boat and the shirt will be my new fishing shirt.
Thank you brother , I hope it brings you Luck lol
Awesome, Awesome, Awesome !!!!!!
This vinyl should have air-egress. Or channels in the back of the vinyl. Dry apply it. U can also hit it with a heat gun. Make sure its laminated also. That gives it an extra UV protection. Any questions just Holla . Great job! On the application fluid use a few drops of 90% rubbing alcohol with johnson baby shampoo. This. Will increase evaporation of the fluid. Just a spoonful. And like 3 drops of shampoo.
It came out pretty good, I really like it . It does have a UV clear layer , the smaller one has it too . I needed you before I installed it lol sounds like you know your stuff
Another Brilliant Video 😉Thank You for Your Time Once Again for Putting it all Together For us..... Brilliant!!!👍👍👍Regards: Rod
Thank you
Just found your channel and love it!!! Hoping to adapt some of your tips and tricks to the course fishing I do over here in the uk. Subscribed
Thank you Sir i appreciate you watching
What ever u do....is well done..my Lord...😀😀
Thank you
Looks good 👍
Awesome vid as usual, subscribed to the new channel as well, I got a feeling my wife will like it too, keep it up bro!
Thank you Sir my wife is pretty crafty
Thanks for the video!!! Really helpfull
Great job as always 👍
Another great how too brother!🤘🔥👊
Great jun - fun video
looks great !!
We need to get you a sweet boat cover!!!
I hate putting on boat covers lol . That's why I bought a building but now its a TH-cam studio lol
That was some cool Decals
Thank you Sir
Pfft whatchu waitin on haha. If I ever do this I'll def be using this method 👍
Stands out. I like it and great job. Your design?
Very nice, but I'll wait to see how they help improve your fishing before I commit to decals! :)
Good point lol , they don't help you catch fish at all lol
Awesome video, as always. Definitely going to check out the craft channel.
Thank you brother
Awesome video
Bloody Awesome video mate 👌👍✌⛵🎣
Thank you mate
I can't lie. It looks pretty sharp. Do you ever take it out where people can see it?😜😂
Couldn't find taday crafts yours and your wife channel
The link is in the description box
Removing decals and tape do not pull at 90deg..the decal or tape is pulling at ur paint. Pull at aprox. 180 deg rolling the sticker off
So what is price range on the facials? 19ft. Enjoyed the video
You have to check with Katfish on the price I hit my Fishin N Stuff decal from them , the SeaArk decal is made by SeaArk , they won't do anything with trade marks on it
Thank you
Try replacing the Dawn dish soap with ba b shampoo next time. Thank me later. 🤣🤣🤣 love you videos. Keep em coming
Baby shampoo
I'll thank you now , thank you brother
I was a window tinter and vinyl graphics installer for 10 years. The baby shampoo is far far better than dish soap
Will check out the other channel!!😂
Thank you Sir
Me and large stickers don't get a long! lol Great video buddy! Happy Fishing! I'm sub #41 on the other channel ;)
Thank you Sir , large stickers are tough
II think I like this also, love your vids & I`ll check the other channel
Thank you Sir
What happened to the catfish noodle video?
I've got one of em on a PVC video
no new channel here the fish's are really scared now lol of you seeing the swimming away laugh at the boat lol all they want for you is the 200 dollar lure they are stealing from your all they care for they will mount it and put it up on the trophy wall lol
Lol
@@FishinNStuff was the link to the channel
You mean you don't like giant air bubbles in your decals?
No lol I don't lol