Ae86 Air Suspension Installation | Airmext | DIY | How To | UKAC | Pt1
ฝัง
- เผยแพร่เมื่อ 21 พ.ย. 2022
- Sam makes a start at fitting his custom air suspension kit produced by airmext.
Subscribe to the channel and add us on Instagram to keep up to date with all the projects and random antics at the farm!
Instagram
@ukautocollective
@Spanner_86
Music
Music produced by myself using the #groovepad app!
Just an update for those that would like to do this for bc racing coilovers the part number is SN12O18OBLY from airmext
Great job and awesome info on that mod! Can't wait to see the end product!!
Sweet mate, keen for the next one
Great videoas always mate. Thanks
I got my rear bag brackets separate from the front bags.They are steel but I'm also going to have to do a bit of modification to mine as well. i dont think the rear bags i got were as large as the airmext ones. Though I did get their management.
@chrisgreer9245 I found out that airmext expect you to remove the rear bump stop mounts to fit the bags supplied. This is something I didn't want to have to do, but it would allow me to use a double bellow and the car to sit lower.
This is class Sam I subscribed to your channel do you remember me from ukso your donated me a 4efte manifold painted it and sent to me in ireland
@mattybyrne6203 I appreciate that buddy. I do remember very well. Possibly the cleanest advance ep82 I've ever seen 👌 Hope your keeping well, it's been a long time 🙂
2 questions for you....one: could I order those spacers/brackets for the rear bags from airmext separately? I dont see it anywhere on their site unless I buy the whole kit which I dont want to do.
Two: what is the part number for the rear bag?
Would greatly appreciate...loving the content. Beautiful car. Thank you.
Hi buddy, if you are referring to the 2.5mm aluminium spacers which sit under the pillowball spacer, i had these made up by a friend of mine. I'm confident you won't need them. With regards to the pillowball spacer i purchased these from a company in the uk called only charged dubs. Regards to part numbers, i unfortunately don't have them. The kit was ordered via a friend who owns Rimscarnated. The rear bags i produced are custom so in theory don't exist as an ae86 rear bag just yet as I'm still trialing it. An update video is in progress so I'll be able to let you know what works. Hope this helps and thanks for the kind words 👍
should really use the bearing in the top rather than relying on the spherical top mount bearing
hi! how do i know what height i should order? i dont want the o-ring to touch the threads right?
The o-ring sits on the shoulder of the shaft. It won't foul on the threads 👍
@@ukautocollective yes, but i mean the bottom of the air bellow. if the bellow is to long then the orings in the bootom will start to go over the threads, and if it is too short then the orings wont reach the smooth part above the theads and seal correctly.
@@Danielssongustav the front bags were made for my bc coilovers. With regards to the where the o-rings sit, that is explained in the video where you have to measure the distance so that the o- rings won't reach the threads. Hope this makes sense.
Are these the ones from ali express , I have spoken with an airmext company on ali express and they sell the bags pretty cheap , are these the same ones?
Yes i think they are 👍
@@ukautocollective how is the quality? Im currently in the process of measuring everything to send the measurements to them
@@davidursachi4581 very good. I have airlift bags to compare them to and i would say the build quality is just as good 👍
@@ukautocollective thank you very much
What is the part number for the front bags?
There isn't a part number for them as they are made to spec buddy. If you use the guide issued on the website they will spec the bag which is correct due that application 👍
@@ukautocollective I want to buy the exact bag you have I am going to bag an ae86 Corolla with bc racing coilovers. That's why I asked which bag is the one you purchased.
@@erikh.1072 I didn't receive a part number for it unfortunately. I just gave the spec I required to Rimscarnated who then sent the details over to airmext to have them made for me. Sorry I can't be anymore help buddy.
@@ukautocollective got it i know this is asking for a lot but do you happen to have the spec's still?
@@erikh.1072 I think I might have at the unit. I will have a look for you when I'm next there 🙂👍