And can you make a video on how to make a inverter using npn transistor I have tried but failed ( how can I switch transistors on and off by circuit ).
@@geniusandmad Dude, those LEDs would not lit up from just one 1.5V battery, they need about 3V min. This is a joule-thief circuit and can light up those LEDs from near dead batteries (the circuit diagram says as low as 0.2V). Hope this help.
This is called a "Joule thief" It uses back emf and the switching action of the transistor to pump out short pulses of voltage higher than the output of the battery. Frequencies above 1kz, and even 50kHz are possible.
@@ge5645 Why all the screaming dude? Neon need at least 40v, LED can be driven by 3v. Neon lights are useful, but not in every application. hypertextbook.com/facts/2004/PhilipYeung.shtml
@Muckin 4on Good point. The induced field in secondary opposes the field of the primary, so while the primary produces back emf as its field collapses, the secondary produces forward voltage as its induced field collapses.
Any cable but at the time of making the video I don't have small gauge wires to make a coil of 8 to 10 turns. You can use any low gauge wire. Even motor winding wire will work just fine 🙂.
@@patrykzeex1637 in certain cases, solder refuse to stick to the surface,even if the solder wire has a flux core, say a slippery battery terminal, in that case you have two options... either file the surface which is always not possible, or use flux which will make the surface ready for soldering.
I'm learning to repair my light led .i wish to undertand how it work because ilike so much all about the electric things im david from el salvador thanks for this videos .i like to see it
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Very good project, I would add a rechargeable battery and a circuit to connect the whole thing to a 110 volts AC once the battery is depleted, of course with an overload protection.
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
You mean the Chinese tac and go technique, the same one that will break in short order rendering whatever it is you soldered useless and borked? Here is a pro tip: ALWAYS make a good mechanical connection when soldering, J hooks and loops so you have that added strength to your projects.
@@Elfnetdesigns No, sorry I only meant the innovative way of soldering the components directly to each other without using veroboard for example. It's like looking at the schematics and it's easier to underestand for dudes like me :-)
@@Creativecreator if we have to increase the voltage we can add more turns of wire it will change the voltage or we can use more guage copper wire ( I have 12 guage copper wire ) it will change the output
Hi friends, I just would like to understand the role of the toroid in this circuit (in other applications I use them is to clean up stray RF signals from coming back to a given transmitter or to make HF transformers, aka baluns, ununs). Thanks !
I believe it acts kinda like a capacitor/transformer, the inductance builds up in the magnetic field of the wire/coil and releases causing the transistor to amplify the voltage even though its just a single 1.5v AA battery. Which technically can't even run those lights.
Nice video. I have been following your channel from quiet a while now, I find it entertaining. But I think now you should start using more detailed titles, and some voiceover, along with some explaination or application of circuits :)
I tried in some videos buddy but the thing is that some people don't enjoy voiceover videos. You can check my 2 latest videos I tried but the response is not that great. So, its kind of disappointing ☹️
can u explain why two terminals of the transformer are soldered together and combined and linked to Vcc 1.5 V and the other two terminals are free , this is an unusual usage of transformer , can u explain its significance and usage ?
it's a simple oscillator that pulses the coil, Induction principles apply when the pulse creates a magnetic field and that field collapses it in return creates an EM spike of higher voltage on the secondary winding, pulse fast enough and you simulate a constant flow of higher voltage to power the LEDs like that. Upscale the circuit with high power components and you can run a standard 120 or 240 volt lamp off a couple batteries.. Your eyes do not see the pulsing but it exists and as mentioned, it's happening so fast it look like the voltage is constant. Neat little fact is this circuit is the core basis of how a stun gun works. Just lower the pulse rate and add a Marx generator stage or three and you have several KV there, add some capacitors and you drive up the amperage to make it actually stun someone.
This is called Joule thief circuit, here he is using 1.5V cell to power white LEDs which basically require around 3V So its use can be to squeeze last bits of voltage from a power source
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Here the toroidial core is used in self oscillation. Basically it is a small transformer that makes any voltage from (0.3 to 1.5v) to 3v. This is a kind of boost converter. you can search on google Joule Thief Здесь тороидальный сердечник используется в автоколебании. По сути, это небольшой трансформатор, который выдает любое напряжение от (0,3 до 1,5 В) до 3 В. Это своего рода повышающий преобразователь. вы можете искать в Google Joule Thief
1) BEST IDEA!!!DIY generator coil!!!how to wind a coil!!!LED test/как намотать катушку для генератора th-cam.com/video/6tosn77Vh7Q/w-d-xo.html 2) BEST!!!64v Generator 3D printing DIY/64в генератор своими руками на 3D принтере th-cam.com/video/Iao_HT0Vc7U/w-d-xo.html 3) Indicator flux gel test for soldering/индикаторный флюс гель для пайки тест th-cam.com/video/RaaS8dXLW30/w-d-xo.html 4) TOP 3 Electrical DIY #1/3 лучшие электронные самоделки 2021 своими руками th-cam.com/video/h3UmoXsmdn4/w-d-xo.html 5) BEST!!!AutoLight With Light Dependent Resistor LDR: Photoresistor/автосвет с фоторезистором th-cam.com/video/7LPpgEddAQg/w-d-xo.html 6) Solder Paste SD 318 NEW Test!!! тест паяльная паста th-cam.com/video/VtjyjsoK36c/w-d-xo.html 7) 0$!!!FREE energy!!!perpetual motion machine!!!free charging!!!Вечный Двигатель генератор из кулера th-cam.com/video/8290MzsLMws/w-d-xo.html 8) 12v simple battery level indicator without relay/transistors уровень заряда батареи 12В th-cam.com/video/iK7FnWakCsg/w-d-xo.html 9) Сurrent Phase Tester BC547 DIY индикатор фазы/скрытой проводки своими руками th-cam.com/video/lkAOjolr9Sw/w-d-xo.html 10) 3 Level Water Sensor Electrical DIY BC547 индикатор уровня воды 3 уровня своими руками th-cam.com/video/qEeE8NePDAg/w-d-xo.html 11) BEST!!!Wire cut indicator!!!Индикатор обрыва цепи!!!Open circuit indicator!!! th-cam.com/video/v83A0qzV52M/w-d-xo.html 12) BEST IDEA!!!timer switch off!!!soft off!!!плавное выключение!!!задержка выключения!!!BC547!!! th-cam.com/video/4ciQrg3U2w8/w-d-xo.html 13) BEST IDEA!!!Police LED Flasher Blink DIY!!!Полицейская мигалка своими руками!!!BC547!!! th-cam.com/video/Jjwp7nN8Jdw/w-d-xo.html 14) NEW 2021!!!TOP 3 Electrical DIY #2/3 лучшие электронные самоделки 2021 своими руками th-cam.com/video/ra-QVgh6z04/w-d-xo.html 15) BEST IDEA!!!Heat Sensor!!!датчик нагрева!!!thermistor and BC547!!!термистор и BC547!!! th-cam.com/video/575dOLzpR60/w-d-xo.html 16) BEST IDEA!!!IRFZ44n!!!MOSFET 2 WAY SWITCH!!!2Х СТОРОННИЙ ПЕРЕКЛЮЧАТЕЛЬ!!! th-cam.com/video/8ajqiKRozVw/w-d-xo.html
I used to build these back in the 1990's out of scavenged parts. If you use a power transistor and a bigger transformer you can power an actual light bulb or build a stun gun lol
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !! GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Not gonna lie, at first i trough it is some.. "American Tech" class of DIY video (if you know what i mean) but seems like it is legit tutorial how to build "Jule Thief" circuit.
![[NEW] Simple Electronics Project](http://i.ytimg.com/vi/Q0egyvceEtQ/mqdefault.jpg)
Schematics at the end of the video!
Hope you will like it :)
Bro mere channel ko bhi subscribe kar lo
th-cam.com/channels/Y0ZTmv7CABh6VFOojVHX7g.html
Bro why you added a transistor when you could have easily get rid of it using resistors
Plz reply
And can you make a video on how to make a inverter using npn transistor
I have tried but failed ( how can I switch transistors on and off by circuit ).
@@geniusandmad Dude, those LEDs would not lit up from just one 1.5V battery, they need about 3V min. This is a joule-thief circuit and can light up those LEDs from near dead batteries (the circuit diagram says as low as 0.2V). Hope this help.
@@takew4694 thank you so much for helping others 😊
This is called a "Joule thief" It uses back emf and the switching action of the transistor to pump out short pulses of voltage higher than the output of the battery. Frequencies above 1kz, and even 50kHz are possible.
Thanks. This channel needs explanations about what the circuit is actually doing and why components are needed.
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
@@ge5645 Why all the screaming dude? Neon need at least 40v, LED can be driven by 3v. Neon lights are useful, but not in every application. hypertextbook.com/facts/2004/PhilipYeung.shtml
@Muckin 4on Good point. The induced field in secondary opposes the field of the primary, so while the primary produces back emf as its field collapses, the secondary produces forward voltage as its induced field collapses.
Wonderful free energy projects. I'm also doing free energy videos.
Nice joulethief 😉
Nice video Thanks 🇧🇩🌹🥀🌷
Mantap selalu😂😂😂
Very nice, you did the entire project without soldering flux, thats the confidence
Thank you so much 👍
@@Creativecreator is usb cable necessary? Any insulated cable will serve the turning purpose, right?
Any cable but at the time of making the video I don't have small gauge wires to make a coil of 8 to 10 turns. You can use any low gauge wire. Even motor winding wire will work just fine 🙂.
What soldering flux? He have solder with flux inside
@@patrykzeex1637 in certain cases, solder refuse to stick to the surface,even if the solder wire has a flux core, say a slippery battery terminal, in that case you have two options... either file the surface which is always not possible, or use flux which will make the surface ready for soldering.
That was cool all ten that bright with one 1¼ volt battery. Nice
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Agreed. Cool circuit for sure. Simple cheap and effective
@@ge5645 stfu
भैया जी नमस्कार, आपने बहुत ही सुन्दर ढंग से सर्किट बना कर दिखाया है यह बहुत काम का है
Thank you 😊
Please explain what you are doing and what the circuit does.
Amazing bro
Wow....So cool Simple Electronic Project
Great 👍👍👍👍
Bhai thanku app ke video se mene 10 curkit banaye
I'm learning to repair my light led .i wish to undertand how it work because ilike so much all about the electric things im david from el salvador thanks for this videos .i like to see it
Thank you so much!
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
I simply love your video style, truly refreshing and creative. 👍👍
That's efficient
Wwwwoooo excelent ideas good
I love the the way you think. Plus , your soldering is professional on point
Thanks 😊
his soldering? why solder all leds on piece of wire instead of prototyping soldering boards. they are quite cheap....
@@altfurr7276 cause why not
that is great invention
Nice explained sir..... 👇👇👇👇
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Very good 👍👍
Very good project, I would add a rechargeable battery and a circuit to connect the whole thing to a 110 volts AC once the battery is depleted, of course with an overload protection.
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Nice
Like 👍👍
Thank you 😊
@@Creativecreator yeah
Good ☺️ job
Thank you 😊
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
superb bro,😃
It has the joule thief circuit. Cool video!
Very nice and simple, thanks. Please inform value's when using 18650 battery?
Ok 👌 this are 2000mah li-ion batteries 🙂
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Ye badhiya tha guru.
Abhi ek LED flasher bnawo. Sab CFL ke circuit ke components se.
Yes bro 😅
What is the use of coil ?
Nice video
That is awesome soldering.
Thank you ☺️
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
This is a very simple boost convertor love IT !
this is not boost converter this circuit is called joule theif
@@prashant7765 IT needs to have a capacitor to be a joule thief Joule thief is specific circuit designed for shaking torch ...but i dont know
@@postualin6551 Joule thief can have either a capacitor or a battery but this is definitely one
@@postualin6551 Don't know about shaking torch but garden solar lights definitely use the circuit.
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
like your soldering technique, thumbs up to you.
You mean the Chinese tac and go technique, the same one that will break in short order rendering whatever it is you soldered useless and borked?
Here is a pro tip: ALWAYS make a good mechanical connection when soldering, J hooks and loops so you have that added strength to your projects.
@@Elfnetdesigns No, sorry I only meant the innovative way of soldering the components directly to each other without using veroboard for example. It's like looking at the schematics and it's easier to underestand for dudes like me :-)
Very nice !
Thank you 😊
Look awesome !! Gotta try it
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Whats the use of the ring?
It works as transformer
IT WORKS!!!!
I like this, thanks Bro
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Very beautiful
excelent video
自製利害……！
好手……😁😃
*
555*o
:-)
/
How much voltage did it boost 1.5V to ??
1.2v to 3.1v
@@Creativecreator if we have to increase the voltage we can add more turns of wire it will change the voltage or we can use more guage copper wire ( I have 12 guage copper wire ) it will change the output
Yes you can
@@Creativecreator I have try and its working but maximum output is 4.6v-4.7v only
@@aarshsinghal2129 yes bro :)
Hi friends, I just would like to understand the role of the toroid in this circuit (in other applications I use them is to clean up stray RF signals from coming back to a given transmitter or to make HF transformers, aka baluns, ununs). Thanks !
Yes ....there is the no use of it 🙂
I believe it acts kinda like a capacitor/transformer, the inductance builds up in the magnetic field of the wire/coil and releases causing the transistor to amplify the voltage even though its just a single 1.5v AA battery. Which technically can't even run those lights.
joule thief
I like it
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Bro what is the function of coil in these circuit
waht if a want to use led candles on batteries and change that to a coil and en transmittor for let it work in a room everywhere?
Hola!
Buenas proyect,senor!
Excelente ideea!
Saludos del România,Mediaș!
Respecte!
You call it "BOOST CONVERTER", but no caps. Interesting. Maybe do follow up with oscilloscope 😁. VERY NICE tinning 👍.
Thank you so much 🥰
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Nice video. I have been following your channel from quiet a while now, I find it entertaining. But I think now you should start using more detailed titles, and some voiceover, along with some explaination or application of circuits :)
I tried in some videos buddy but the thing is that some people don't enjoy voiceover videos. You can check my 2 latest videos I tried but the response is not that great. So, its kind of disappointing ☹️
@@Creativecreator whaaaattt!! youtube is a wierd place🤥
Good going man, keep doing what you are comfortable with, I will watch regardless 😉
Thank you so much for your support 😌
good idea
can u explain why two terminals of the transformer are soldered together and combined and linked to Vcc 1.5 V and the other two terminals are free , this is an unusual usage of transformer , can u explain its significance and usage ?
OMG Smart
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
@@ge5645 sorry bro your channel suck
Why this circuit has a coil and a transistor?
I want to learn electronics but not very good at understanding yet. I only can learn myself.
it's a simple oscillator that pulses the coil, Induction principles apply when the pulse creates a magnetic field and that field collapses it in return creates an EM spike of higher voltage on the secondary winding, pulse fast enough and you simulate a constant flow of higher voltage to power the LEDs like that. Upscale the circuit with high power components and you can run a standard 120 or 240 volt lamp off a couple batteries.. Your eyes do not see the pulsing but it exists and as mentioned, it's happening so fast it look like the voltage is constant.
Neat little fact is this circuit is the core basis of how a stun gun works. Just lower the pulse rate and add a Marx generator stage or three and you have several KV there, add some capacitors and you drive up the amperage to make it actually stun someone.
@@Elfnetdesigns Thanks for the advice... i mean the explaination. :)
@@orlaani1451 I try to help when people seem genuinely interested in learning, though I am blunt and to the point.
Bright 🍬 🥊😂💎
What is the use of this project
This is called Joule thief circuit, here he is using 1.5V cell to power white LEDs which basically require around 3V
So its use can be to squeeze last bits of voltage from a power source
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Hi, kia aap k pass 5000/2000w induction heater banane ke video hy to please link bhejin.
Bhai 2n 2222 transister use kar sakate ha
Yes
What you made?
Boost converter
@@Creativecreator thanks. Keep it up bro..
wozu brauche ich den ganzen krempel, wenn ich die led s sowieso parallel schalte???? Scheint mir ne ziemlich sinnlose schaltung zu sein...
Nice Video.
What tool is this on 1:10?
Thank you 😊
This is wire stripper
@@Creativecreator OK. Thank you for your help 🙂
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
The thumbnail should be from the video itself.
should
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Sir can you make a amplifier circuit using CD7522CS .........PLEASE SIR.......
One thing that is missing in many of your videos are
THE VERY OBJECTIVE IS NOT MENTIONED!!!
Pls give relevant TITLE & DESCRIPTION.
👍
Whatt is funcional these project
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
good
Do you know what is the time range? Thanks in advance
According to the Battery capacity
5.07 is that normal wire or special one?
Normal coper wire.
Молодец, однозначЪно!
Circuit diagram?
All my videos has circuit diagram at the end of the video
@@Creativecreator Thanks
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
Y no era mejor poner los led directamente a los polos de la bateria sin tanto rodeos
make a 3.7 volt to 5 volt two ampere boost converter circuit
Hello PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
How much time , battery life time gets in this Circuit...🤔
cool
Valeu!
Grato!
Muito bom!
Abraço!
Where are you from
I am from India
Tudo isso só pra ligar um punhado de luzinhas 🤔
Pra iluminar sua mente oca kkk
@@jotaparecido kkkk mas pra isso vai faltar luzinha
👍👍👍
Bruh it's just a joule thief.
But still good tho.
Thank you ☺️
One more nice video bro. Mais um ótimo video mano. Abraço (hug)
Класс! И почему светодиоды светятся от 1.5v?. Один должен от 3v...Объясните. Что делает катушка?
Here the toroidial core is used in self oscillation. Basically it is a small transformer that makes any voltage from (0.3 to 1.5v) to 3v. This is a kind of boost converter. you can search on google Joule Thief
Здесь тороидальный сердечник используется в автоколебании. По сути, это небольшой трансформатор, который выдает любое напряжение от (0,3 до 1,5 В) до 3 В. Это своего рода повышающий преобразователь. вы можете искать в Google Joule Thief
@@Creativecreator ты бредишь чтоли?
Led kitne volt ki lagaen
0:26 what is this called
Toroidal Core 😉
😁
Compact Fluorescent Lamp (electronic module ~ hopefully dead or discarded)
Fantastique
The circuit doesn't match the thumbnail.🤔
bro please yah b batya krin sath k es jaga eska kam kaya h.
You was Made Thief Joule circuit!
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
1) BEST IDEA!!!DIY generator coil!!!how to wind a coil!!!LED test/как намотать катушку для генератора th-cam.com/video/6tosn77Vh7Q/w-d-xo.html
2) BEST!!!64v Generator 3D printing DIY/64в генератор своими руками на 3D принтере th-cam.com/video/Iao_HT0Vc7U/w-d-xo.html
3) Indicator flux gel test for soldering/индикаторный флюс гель для пайки тест th-cam.com/video/RaaS8dXLW30/w-d-xo.html
4) TOP 3 Electrical DIY #1/3 лучшие электронные самоделки 2021 своими руками th-cam.com/video/h3UmoXsmdn4/w-d-xo.html
5) BEST!!!AutoLight With Light Dependent Resistor LDR: Photoresistor/автосвет с фоторезистором th-cam.com/video/7LPpgEddAQg/w-d-xo.html
6) Solder Paste SD 318 NEW Test!!! тест паяльная паста th-cam.com/video/VtjyjsoK36c/w-d-xo.html
7) 0$!!!FREE energy!!!perpetual motion machine!!!free charging!!!Вечный Двигатель генератор из кулера th-cam.com/video/8290MzsLMws/w-d-xo.html
8) 12v simple battery level indicator without relay/transistors уровень заряда батареи 12В th-cam.com/video/iK7FnWakCsg/w-d-xo.html
9) Сurrent Phase Tester BC547 DIY индикатор фазы/скрытой проводки своими руками th-cam.com/video/lkAOjolr9Sw/w-d-xo.html
10) 3 Level Water Sensor Electrical DIY BC547 индикатор уровня воды 3 уровня своими руками th-cam.com/video/qEeE8NePDAg/w-d-xo.html
11) BEST!!!Wire cut indicator!!!Индикатор обрыва цепи!!!Open circuit indicator!!! th-cam.com/video/v83A0qzV52M/w-d-xo.html
12) BEST IDEA!!!timer switch off!!!soft off!!!плавное выключение!!!задержка выключения!!!BC547!!! th-cam.com/video/4ciQrg3U2w8/w-d-xo.html
13) BEST IDEA!!!Police LED Flasher Blink DIY!!!Полицейская мигалка своими руками!!!BC547!!! th-cam.com/video/Jjwp7nN8Jdw/w-d-xo.html
14) NEW 2021!!!TOP 3 Electrical DIY #2/3 лучшие электронные самоделки 2021 своими руками th-cam.com/video/ra-QVgh6z04/w-d-xo.html
15) BEST IDEA!!!Heat Sensor!!!датчик нагрева!!!thermistor and BC547!!!термистор и BC547!!! th-cam.com/video/575dOLzpR60/w-d-xo.html
16) BEST IDEA!!!IRFZ44n!!!MOSFET 2 WAY SWITCH!!!2Х СТОРОННИЙ ПЕРЕКЛЮЧАТЕЛЬ!!! th-cam.com/video/8ajqiKRozVw/w-d-xo.html
This is a joule thief circuit.
YOU USE THE WORD SIMPLE WOULD IT NOT BE SIMPLER TO JUST USE TWO BATTS AND A CURRENT LIMITING RESISTOR ? STILL AN INTERESTING CIRCUIT.
Keren
i did not get it' anyway what is the concept
It's a joule thief using torodial from cfl
I used to build these back in the 1990's out of scavenged parts. If you use a power transistor and a bigger transformer you can power an actual light bulb or build a stun gun lol
Ok felicitari
Ok now explain how does it work.
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
I don't understand this video☹️
VERY FEW PEOPLE KNOW ABOUT VINTAGE NEON LAMPS
MAKE A SIMPLE ARTIFACT OUT OF NEON LAMPS AND UNDERSTAND THEM !!
GO WATCH IT ON OUR CHANNEL GO ELECTRONICS!
HELLO FRIENDS WHAT'S THIS SONG?
PEOPLE DON'T KNOW ABOUT NEON LAMPS !MAKE A SIMPLE NIGHT ARTIFACT OUT OF NEON LAMPS
GO WATCH ON OUR CHANNEL GO ELECTRONICS !!
Not gonna lie, at first i trough it is some.. "American Tech" class of DIY video (if you know what i mean) but seems like it is legit tutorial how to build "Jule Thief" circuit.
❤️❤️
ভাই প্রজেক্ট টা ভালো
When you started to solder on the battery I got really scared
It is not 18650 buddy 😂
It is a alkaline battery. 😁
Battery and heat, not good. Use battery hopder.
Ok 👌
привет.что надо добавить чтобы диоды загорались по очереди
как минимум, не спаивать их паралельно