I BROKE my FRAME!!! How to fix the Stealth Bomber E-BIKE Frame
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2021
- I split the welds on my Stealth Bomber Frame. See what I had to do to get back up and running.
**********************************
Frame, motor, Sabvoton controller and wheels from Alibaba. Everything else was purchased through various online stores and built in my garage.
Full Spec List:
1. QS273 V3 motor, 5T wind
2. Sabvoton 72200 200amp controller at 150 amp - locked version
3. 49ah Panasonic battery with 150 amp max bms. (weighs 37lbs.), plus an additional 10ah battery in the controller box running in parallel.
4. 80/100-21 front tire & 90/100-18 18x1.85 rim in rear with Dunlop K990 tire.
5. Protaper Aluminum Handlebar, 3" Rise, 31.8mm Bar Clamp, 810mm Width. I cut 1.5” off either side.
6. Odi Rogue lock on grips. These things are AWESOME!
7. Shimano Zee 4 piston brakes on both front and back. Front rotor is a SRAM Centerline 220mm with a Hope adapter. Wired for e-brake. These brakes are a definite improvement over Tektros.
8. Two 210mm DNM RCP 2S 550lbs shocks.
9. Fox 40 Elite forks with 50lb spring.
10. Shimano MX 16 Tooth Single Speed Freewheel.
11. Fender is off a Razor MX650 and cut down to size. Had to get creative in mounting this as there is no mounting holes on the DNM fork. A bit of a ghetto mount but it works.
12. SCOSCHE MAGTFM2 MagicMount XL Universal Flush Mount Holder for Mobile Devices.
13. CAB Motorworks Saddleman seat made in USA. LOVE this seat. SO much better than the Chinese version.
14. Nkomax automatic Smart Bike Tail Light Ultra Bright
15. OneUp Components Composite Pedals. Your feet stick to these like glue.
16. Izumi Chain JET BLACK Easy Running 1/8" BMX
17. FFSA Gravity Light Direct Mount Stem 31.8mm 5D 45mm, with a Direct Mount Stem Stack Billet Spacer 12mm from SOUL
18. RaceFace Narrow Wide 1x Chain Retaining Chainring 5-Bolt 110mm BCD 40t Black with Promax SQ-1 155mm crank arms.
19. 180lbs.
20. Grin Cycle Satiator 72 volt e-bike SMART battery charger. - บันเทิง
![[ไฮไลต์] ฟุตบอลชาย ญี่ปุ่น vs ปารากวัย รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/X_BeGaAv1oM/mqdefault.jpg)
Wonderful video, and thank you for taking the time to list everything out the description it saved me a ton of time!
My pleasure bro. Wish I could be making more videos but I'm laid up with a broken leg right now.
Sorry to hear about the frame brother! Glad to see you got it fixed. For the weld that’s thicker you could simply put black electrical tape to cover it up
That's was crazy how you found that screw and the washer what luck.I have the same frame but l won't be doing any kinda riding like l used to do.I'm just happy to be walking again after my last accident.Good stuff bro👍👍⚡⚡
Thanks man. Safe riding
Definitely the unsprung weight of the hub putting extra stress on the frame, Nice job repairing!
Keep up the good content!
Thanks for watching man!
I'm pretty sure I have the same generation frame kit, are there any other areas that should be welded while the frame is bare? I don't want to add too much weight but welding the whole thing.
Also, do you have an opinion on speed vs torque with different wheel sizes? For instance a 3.5t with a 17" rim or a 5T with a 19" rim? I want as much torque as possible but still some decent top speed. I'd be happy with 50mph
Great video..You broke your frame and i broke a my axel on the hub motor. I replaced it with a 2.5t for more speed. I ordered a 10ton verticle press. Going to push out the broken axel and replace it with a new one. After that i will have 2 motors..lol..Best of luck on your repair!
As it shows in the video we fixed it perfectly. : ). Good luck with pressing that axle out, id be curious to see that process if you could video it!
@@JoshStreetDesign Yeah my seller wants a video to bro.Going to make one when it gets here , I got two axel so I am eager to try it myself.
Hey Josh I'm glad you got the bike fixed it looks great with the welds. I like that motorcycle seat you got I have on coming with mine but I to doesn't fit like your does how it comes up more on the frame. You need it like that for your type of riding I'll be on street an bike paths. I hope all is good with you other wise buddy. Looking forward to seeing more videos love watching them. Ride safe buddy. God Bless.
Thanks for watching man. Yeah that seat is a custom seat bought from cab motor works and it was super expensive but it was worth every penny. I don't know if they sell it anymore though.
@@JoshStreetDesign they do, it’s expensive for sure.
@@erikjonromnes when I bought it it was $450 I think I heard it was like 700 some now. Id still pay it though
Whered you get your front wheel? I bought a qs273 50h 4t on a moto 18x2.15 rim and im using a dunlop 100/90-18 on it.. i have just about all parts ordered or delivered.. but im having a hell of a time finding a moto rim with a mtb hub. And i dont want to build my own. Sur ron front wheels are exactly what im looking for but lunacycle doesnt have any front wheels in stock.. ive looked everywhere. i cant find one in the usa.
Try this link. I'm at a similar point in the build process. I got this same spoked wheel with off road tire. I'm pleased with it.
www.ebay.com/itm/Ebike-21inch-Motorcycle-Wheel-Front-Wheel-3000W-5000W-Rear-Motor-/333858278098?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Hi what kind of back fender and how you installed? Thank you J
hey bro nice bike.i myself got a 15000w 72v 49ah with sabvoton controller 200A.my stock twist throttle starts giving some lag and sometimes it stops working which is dangerous especially when im on the orad.so i purchased a domino twist throttle ,do u have any video on how to put it the new throttle on or any tips?thanks
Just got to mess with a wiring to get the right combo. Just cut the wire to the stock throttle and then experiment with the wires and the Domino throttle till you get it right
Dope video josh
Thanks bro!
@@JoshStreetDesign np brother my seat came in And rotors now just gotta get the battery then we will be riding
Ohhh no bro I had 2 different frames break in exactly the same way riding off-road and hitting bumps and rocks and stuff. My bolts def were not too tight though. I think it was just really the weight of the rear wheel and the fact that these frames aren't really meant to hold up to that. Sucks to see your beast like this though, man. That's a bummer. Glad you got her back up and running! Great vid!
You must not have watched the whole video then because we welded it and now it's more stronger than it was originally haha
@@JoshStreetDesign I know, bro I commented as I was watching before I finished and then forgot to come back to edit it 😂 Got excited that I wasn't the only one and jumped the gun lol.
@@JoshStreetDesign Anyway great content bro, keep 'em comin'!
@@Baronial10 ha ha, thanks for watching bro!
@@JoshStreetDesign ok so how much will you and manny charge me to reinforce both of my ebike frames?? 1 is the standard Stealth bomber frame and the other is the frame of the CS20? I mean that is if your in the north jersey area near Clifton.
i have this frame i also built my own ebike and i hve big problems because yk the parts are just so expensive even my most nicest motor i could get was 3000W by nbpower because of the research i did but even that one after about 2300 miles locked up and died on me while riding like i normally do and i ride on street any tips on motors? or what i should do? and what are the best brakes?
Sorry to hear your motor locked up. That's not a common thing with these hub motors. Are you putting way more power through it than it's rated for? As far as brakes I love my shimano Zees. Make sure you get the bigger front rotor too.
Another great video Josh, really interesting… I’ve order a vector typhoon frame for my build
How the build going?
@@JoshStreetDesign hey bro, yeah not the best, a few drama’s with the wrong dimensions given to me from the frame, so I ordered a battery that was too large, and they forgot to send me the correct connector etc… 🤦🏻♂️haha I was trying to find your contact details for some guidance and assistance… anywho I hope I get there eventually, it’s been a long road 😤
@@guysmiley4872 oh man that stinks. Changing a connector is fairly easy, but if thae batteey doesn''t fit then that's another story.
@@JoshStreetDesign yeah man, so so annoying - I’ll find you on messenger and send some photos of it, otherwise it’s a cool frame, I got the 8000watt motor kinda wish I went for the 5000watt… actually the bike looks very similar to yours, all black and very minimal- also running a sabvoton 72200 controller with a 72v 50ah battery- if you are ever out to Australia after this crazy virus it would be great to link up and go for a ride and a beer 🤙
What frame is that, looks like the one I seen on AliExpress? I just ordered a stealth bomber frame/clone should be receiving it tomorrow.
Super stoked to get it built!
What size is your rear wheel? I’m leaning toward 19 inch front and rear but still contemplating.
Yeah it's the steel bomber frame from Alibaba. Currently I'm running an 18 inch wheel which I love for off-roading. 19 in wheels don't give you enough sidewall rubber for off-road
hello man, I love your videos. I have a question for you !!! What is the difference between choosing:
a) QS273 5T & QS205 5T
b) Sabvoton 72200 & Sabvoton 72150
273 is bigger, more powerful, but heavier. Same goes for the 72200 versus 72150, if you don't have a battery that can be supported by the 72200 then get the 72150
Hey Josh I was wondering if you could tell me what bike hauler do you have for your bomber I need to get one an wounded g if you could help me with my choice. I would deeply appreciate it thanks for your time buddy.The one you have is that the specstar 450lbs one. I ki d of looks like it and if it is how do you like it. Ride safe and God Bless
Yeah no problem I use the one from harbor freight it's like $100 and you can use a 20% off coupon. I've had zero problems with it and it works perfectly. I've carried everything from e-bikes to my dirt bikes and even a crotch rocket once.
@@JoshStreetDesign thanks so much i appreciate you letting me know that. Ride safe buddy.
hello man, I love your videos you have a really amazing ability to do things on the motorcycle! by the way, the colin how did you do it? thanks man, greetings!
Thanks bro, I appreciate that!!!
Hey man, was wondering how much your voltage sags when you throttle on a higher mode. Because when I’m on my highest mode my battery voltage goes from 82 to 68-70 ish volts when slamming on the throttle. I don’t wanna be hurting my battery or anything
That's fine, the more your ride it and the battery charge drops, the greater the voltage sag will be.
@@JoshStreetDesign awesome thank you so much. I was just used to my 3000w razor project only dropping 4-5 ish volts so my e-enduro dropping 12 really scared me
I’m thinking of building a bomber bike with qs 273 v3 5t?. I was wondering, how is the handling with all the weight. Is it good enough off road?
not to be a jerk, but have you not watched any of my videos???? Did you see the clip in the middle of this video. That should answer all of your questions. Lol. In fact I never ride on road only off road.
@@JoshStreetDesign I’ve seen most of your videos and there really well done. Sorry for looking I didn’t watch your video, I just like to confirm things twice. Thanks for the reply and yes you were really working that bike off-road.
Did you ever end up building one?
Damn that sucks but thank for all the details, I have an identical frame made of chinesium. I'm going to lay some beads inside to reinforce the welds. Cheers bud
It's good to plan ahead. : )
If you don't mind me asking where did you get the rear mudguard from, looks legit
Which one? The one on the seat? That's the extended Sur Ron fender, you can get it off eBay for like $40. I even made a video about installing it on my channel.
@@JoshStreetDesign good point I meant the lower one by the tire
Hey bro. How good is the acceleration on your bike. How fast can you reach 80kmh?
Top speed 69kmh, it gets there really quick, probably under 5 seconds. This is the high torque 5t motor
Do you have a link for both rear fenders?
The one on the seat is the extended fender for the SurRon. The other one used to be on Amazon but I can't find it anymore.
Where did you get this motorbike seat from it looks totally different and more closer to your handlebars which is nice, link on where you got it from please?
CAB motor works. Although I got it years ago when it was only 450 it's super expensive now
Still way better then the china motorcycle seat!
@@jubaierrahman9649 bro it's a thousand times better than the Chinese seat
Are there any cheaper recommendations other then the one you have and the chinese seat?
@@jubaierrahman9649 you could probably use a seat off of a pit bike or a small dirt bike and get it fitted on there
How you broke it it's strong frame
Hey dude, where did you get that rear mud guard ?
Amazon but I don't think they sell it anymore
Cool videos. New subscriber. I live in Clementon in Camden county. Just ordered 12kw Lehli from China. It should be a ton of fun. I already have a hyperscorpion, no problems with it. Just want to rip some.
I'm in Marlton dude!
@@JoshStreetDesign I knew you were close with all the sand and pines. I've already put an extra battery on my scorpion, along the lines of uncle Fester. I get 50> miles at full throttle, no pedal. Marltons right around the corner, do you have a web site? I like tinkering.
@@rickvassell8349 my website is for my photography biz. www.joshstreetdesign.com
What kind of phone mount do you have on there?
It's in the video description
I had all my m6 bolts fall out off the rear brakes. The whole rotor was off and loose. I had only front brakes. Rode slow home
Yeah it can help to put lock tight on them
I want that bike so bad, the exact one he has in this is what I've been looking for
build it up man!
@@JoshStreetDesign hey I'm just curious, is it possible for the display to be showing the wrong battery% on an ebike? My bike has been showing its at minimal power but hasn't shut down after going over that
@@_-_-_L_-_-_ it will always still have a little extra juice below 0, but DO NOT RIDE it at those levels, you will damage it.
Got a question can that stealth bomber keep up with your KTM
Absolutely not. They're not even in the same universe. The KTM is a monster putting out 58 horsepower. The bomber maybe puts out like 10-15 horsepower.
Also nice ebike
Do you have torque arms on your bike?
Torque plates, you can see me install them in the motor video
Can you help me, is 19 21 off rd wheel setup better than 21 off rd?
My bomber is being built now & they want to know
For the rear you absolutely want an 18 or 19 in. 21 in only for the front
@@JoshStreetDesign iv been told the bomber is very high on 21 rear only down side to 19 rear is it can't really go on road tyres then or can it
@@ModModRc I'm confused you said you wanted it for off-road so why are you asking about road tires?
@JoshStreetDesign I'm not sure if I should get the 19R as I was thinking it may not go back on enduos, & may not look right with bike seat. They're not legal here
@@ModModRc But I don't know what to tell you. But if you're getting that Chinese Moto seat be prepared to be uncomfortable cuz it hurts
Interesting
Guys you have to realize this made of plate carbon steel and isnt seam welded both sides only one side with spots on inside, and it has no internal frame making this frame ,really week even doing small jumps.we have one of these and have had to do major mods to make it lighter,safer, and changed tiny shock to big 350mm shock with linkage arm assembly,now its smooth through whole shock range ,also found using a 9c motor with 9x7 winding upgading phaze wires and swapping out magbets for neodtmiums then heat and waterproofing and fero fluid with hubsinks, gets the bike up to 105 kms per hour on 72 volts.with bonus of having like 8 kilos only in weight on rear wheel,managed to cut the frames weight close to half .its ened up being one big tall bike now ,feels like the old huge trail bikes. im hoping soon though can get 2 of the extra fast grin all alxe motors so can make it dual drive ,for when its ready to go up for sale.
Dude your put way to much money and work into that thing. Your should have just done a proper dirt bike conversion. These Chinese frames have too short of a wheel base and are just so small overall.
great videos man,is there anywhere you would recommend ordering a battery from please ???
I recommend you join the DIY battery group on Facebook and make an inquiry. There are tons of guys who custom build them exactly to your specs, and you will get quality.
@@JoshStreetDesign thanks a lot man will do,where did you get that sweet back mud guard ?
@@mansonmason6119 the one that's attached to the seat is the extended mud guard for the sur ron that I modified to fit this seat. The one that is on the wheel was on Amazon but when I go to that link it actually doesn't show up anymore unfortunately and I've tried to find it but I can't.
@@JoshStreetDesign nice one josh mate,keep it up man great videos...
@@mansonmason6119 yeah I've been out on a broken leg but yesterday it was my first day back on a bike in 3 months so hopefully we'll get more videos soon
Was that seat custom made
Yes it's bought from cab motorworks I think they sell them on their website but when I bought it it was like half the price they're selling it for now it's way expensive now
Do these enduro bikes come with pedal assist mode?
Yes but I disconnected it. I have no need for it, this bike is way too heavy to pedal anyway. The pedals are just for show to keep the cops off my back.
@@JoshStreetDesign Yes that is the reason i ask. I would like for it to be street legal. Here in italy they do checks from time to time. I was also wondering if anyone has tried to limit the amperage so that it does not push over 250w (legal limit in europe for ebikes). It would be a temporary setting for when you are not offroad but i don't know if it would even move with all that weight only pushing 250w
@@DavideBertola no 250 Watts wouldn't move this bike
@@DavideBertola that's an absolute joke. Sorry you got to deal with those kind of laws over there
You got a direct link to this frame?
I wouldn't use it it's just so heavy
@@JoshStreetDesign yeah I’ve heard that just trying to have options before I pull the trigger on something. I would like to check the link out if you got it.
@@TerminusWindowCleaning I got mine years ago directly from Alibaba so I don't have any links. You can just search eBay or Alibaba or AliExpress for the EEB frame
Idk anything about welding but leaving the battery in the frame while welding it seems like a bad idea
Ha ha, we covered it up, it was all good
@@JoshStreetDesign It's not about burning it, you should remove the battery and controller before welding so you don't fry it. Or at least disconnect them.
@@Litespd750 everything was definitely disconnected. : )
These chinese frames arent made for jumping..and that qs273 axle will likely snap sometime. It has on many qs motors
Possibly.
I suspect cheap china? Great video, thanks for sharing. Try Eleek or Vector Ebikes, far superior.
Thanks for watching. Maybe superior to a base model but I have totally rebuilt this thing with all high-end custom parts outside of the frame, everything has been upgraded as you can see in the parts list in the video description... so this bike is pretty darn good as it is now. The FOX40 forks alone were $1600. : )
@@JoshStreetDesign Appreciate you’ve did a lot work to the frame. There are better frames that don’t risk injury and as you said that frame could have gave way causing you serious harm. That was point, right first time, buy european whenever possible, rather than cheap china, less garage time, more riding time.
Hello, tell me on the 5t winding what is the maximum speed?
about 43mph with the battery and controller combo I'm using. It would probably go faster with a better battery and controller.
Это 69 км.ч. Планирую установить контроллер Thermo Nucular 24F и батарею максимум 72 v 300а Smart Ant бмс и 19 мото обод перед и задние. Я думаю поедет 75 км.ч и тяга нормально будет на 273 5т
@@user-xq6ot8qj5x maybe, I actually had one of those on order but it never came after a year and a half.
@@JoshStreetDesign ждал один год, сночало заказывал 12f потом у них проблемы с производством 12f попросил поменять 24f и получил. По сравнению с вашим контролером почти в два раза меньше и настроек очень много для любителей в настройках поиграть. Сейчас не реально купить в связи с ограничениями по РФ и ценник вырос. Ваш контроллер тоже не плохой вариант.
Hey ishh happens. Machines break but machines can be fixed. that does suck though.
Well it was fixed and it's stronger then ever now. : )
I love the build I'm still waiting on my motor should be here soon
@@filimorris6413 how did you end up making out?
@@JoshStreetDesign oh it's up and running I'll send a pics through a msg I need a 360cam now so i can make some videos too lol thanks for asking
@@filimorris6413 great! Looks good
nothing gets the blood pumping like sparks right next to a literal battery bomb
Living on the edge, ha ha
I'd be more worried about the heat busting a cell into a fireball
You are skinny. No i'm kidding. You are skinny! No i'm kidding !
Pure chineesium frame.
its a steel frame actually. Chinesium doesnt bend, it breaks.
@@jstagzsr it didn't break it was just the welds came apart. It won't break again now though.
@@JoshStreetDesign yeah I know. I watched the whole vid.. I was saying it's not chinesium BECAUSE it bent and didn't break. That chinesium weird alloy is super stuff and brittle. I've never seen any of it bend. The bomber frame is steel. I have one.
@@jstagzsr oh gotcha. Yeah this frame is heavy as hell dude, lol
@@JoshStreetDesign Yeah it definitely is. when i got the box in the mail i was suprised at how heavy it was.
I have no idea why they couldn’t spend a bit more time, and weld a U bracket on it….all these frames come like that….and it’s definitely the weakest part of the frame….I decided to weld a piece of steal stalk between the two half’s to make it stronger….I might make the bracket have two sizes….one sits it low and give me 150mm, and the other gives me 165mm….at a 150mm the peddles will bottom out when turning….adding to the danger, one of my peddles is bent….so I’m gonna need new peddles and crank $60 dollars wasted….I can still peddle but one side is bent….my pedal assist is disabled for that reason….lucky for me I can easily pedal the bike with no power….I’m trying to make mode 0 use to charge the battery.
27.5 inches wheels….and 200mm made it sit too tall’ sucks being 5ft 8 Lol.
Bone lengthening surgery or by some elevator shoes might work.
Too tall? You should try sitting on my dirt bikes, they're like 4 inches higher than my eeb, ha ha
I beg you please get titanium bolts, you won't regret it. I'm building the same bike, same frame, the welding is shit you need to get it all sealed up, take it all apart and weld up all the seams from the inside what your friend has done is only temporary.
Why would I want titanium bolts they are weaker than steel bolts...
@@JoshStreetDesign its all down to the grade and where they are used.
1. Low Density and High Strength
The density of titanium is 4.51g/cm³, which is higher than aluminium but much lower than steel, copper and nickel. Compared with steel bolts, titanium bolts can save 40% weight.
The tensile strength of the most common titanium alloy grade 5 can reach a minimum of 895mpa, so the strength of titanium bolts is much higher than that of stainless steel bolts. For ordinary pure titanium, such as grade 2, the tensile strength is lower than that of stainless steel bolts.
2. Excellent Corrosion Resistance
Titanium is very stable in many media, such as titanium in oxidizing, neutral and weak reducing media is highly resistant to corrosion. So titanium bolts are widely used in chemical industry.
3. Heat Resistance and Low Temperature Resistance
The titanium bolts can be used for a long time at 600 ℃ or higher. Titanium alloy TA7 (ti-5al-2.5sn), Grade 5 (Ti-6Al-4V) and Ti-2.5Zr-1.5Mo are representative of low-temperature titanium alloy. They maintain good ductility and toughness at low temperature of - 196-253 ℃ and avoid cold brittleness of metal. They are ideal materials for low-temperature vessels, tanks and other equipment.
Grade 5:
www.aliexpress.com/item/32874909027.html?spm=a2g0o.detail.1000014.39.1cf1b18dSXbYzC&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.33416.213724.0&scm_id=1007.33416.213724.0&scm-url=1007.33416.213724.0&pvid=3fe83fea-d67b-4cc7-b3cb-522864248ef6&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.33416.213724.0,pvid:3fe83fea-d67b-4cc7-b3cb-522864248ef6,tpp_buckets:668%230%23131923%23100_668%23888%233325%233_23416%230%23213724%230_23416%236336%2330491%237_23416%234721%2321967%23723_23416%234722%2321972%234_668%232846%238108%231977_668%235811%2327177%2328_668%236421%2330826%23588_668%232717%237558%23129_668%231000022185%231000066059%230_668%236808%2332772%23317_668%233422%2315392%23382_4452%230%23226710%230_4452%233474%2316498%23670_4452%234862%2324463%23884_4452%233098%239599%23540_4452%235108%2323442%23964_4452%233564%2316062%23771&pdp_ext_f=%7B%22sceneId%22:%2223416%22%7D
You need regen breaking dude
I use electronic braking alongside of the regular breaking. Regen is the type of breaking that kicks in when you're not using the throttle and I don't want that cuz I like to coast freewheel
@@JoshStreetDesign I'm pretty sure you can regen with a sabvoton on command and still freewheel?? No?? I won't be buying a sabvoton if that's the case
Remember when i said be careful with these cheap chinese frames?😅😂
It's all good after we welded it it's stronger than ever... However I just bought a brand new Alta 2018 mxr this week so this thing's probably going to sit for a while haha
You don't have to be a scientist to understand where the issue is.... Those double suspension, They are too stiff, if you see the metal is been PULLED off the chassis, and mostly is Hydraulic, in slow movement you will see the suspension moving freely, but at high speed movement the suspension become to stiff and they behave as a pivot point. For sure welding helped.
Yeah but when I only had one shock and I would sit on it I would literally sag almost all of the travel. Got to pick your battles when it comes to HUB motors
@@JoshStreetDesign HUB has nothing to do with the chassis, if your rim gets damaged, that is due to the MOTOR, Due to the leverage, the spokes are strong enoght to stress the chassis having the suspension as a pivot point. Putting two Suspension you are also encreasing the friction and mechnical resistance of having two pistons. A stiffer single spring would have been better.
@@Wolfox360 yeah I hear you but I couldn't find one in that size so I had to do the next best thing. It's a situation of the lesser of two evils bud. : )
DUDE YOU LUCK OUT. I DIDNT my broke totally right were that is, not welded , tack weld are useless. But i got road rash left shoulder/arm/knee. Right calf/ankle puncture wounds.. bruied heart, broken rib. I Never ride off road bike is 220lbs. All paved roads. I hit average pothole and frame broke causing wheel to jamm on seat, then i went diwn at 30mph.
Wow man, sorry to hear that!
@JoshStreetDesign I wouldn't trust those welds, it should one continuous weld. Not spot welding
Umm 😂
I'll tell you what happened.
The frame builder does not have a hundred years or more experience, and is 8000 miles from most of their customers.
Is that a Chinese FAKE ebike? The Australian made B52 Stealth is hand made and tougher than nails. If this bike is a fake you may want to correct your language as incorrect defamatory remarks need to receive careful consideration and most important to the correct company of manufacture. Cheers mate
this bike is NOT a Stealth Bomber. From what I can tell it looks like a cheap Chinese copy of the Stealth Bomber frame, so it's very misleading to say you broke the frame on a "Stealth Bomber" when in fact what you broke was just a cheap copy... I guess you get what you pay for. Not saying you haven't put a lot of quality components and hard work into building this bike, just that it's not a "Stealth Bomber." Stealth Electric Bikes does not sell their frames on Alibaba.
True, but it's funny that this bike would smoke a real stealth bomber, no comparison.
@@JoshStreetDesign I don't think he's doubting the components or power, just the frame. I've seen there is another enduro frame on the market, a little more expensive, with dished side panels and the rear swing arm dropouts are vertical as opposed to horizontal. I've heard people refer to it as 'the better one'
@@18ct I didn't want that frame because it has a narrower swing arm that my tire would not have fit in and also because side panels are plastic whereas mine are steel. Every single guy I know who has had that other frame has busted the side panels and none of them ride as hard as I do not even close.
I’m sure you are correct that this bike is faster but my point is only that you are calling it something that it is not. There are relatively very few videos about the real Stealth bikes from actual owners. I’m about to buy a Stealth F37 and it was somewhat concerning to see that someone broke a frame, until I looked at your full parts list to see that it’s not a Stealth and I don’t think you can compare the Stealth frame build quality to a Chinese copy from Alibaba and use that to draw any conclusions whatsoever about the reliability or build of a Stealth.
For example CAB Motorworks Eagle and Recon I believe uses a frame similar to this one and their warranty clearly states that if you jump the bike or ride it aggressively then the warranty is void… what?!? It’s a mountain bike/ dirt bike hybrid that has over 10k watts of power with full suspension and you’re not supposed to ride it aggressively. Hmmm. So, back I went to looking for a (real) Stealth bike (though I’m also considering a “Cake Kalk&” since it’s street legal as a motorcycle). Anyway I still like your channel, I’m just suggesting to be more factual in the titles. Thanks.