Good luck The last ones always had clear plastic ones. The one I have now is gray plastic....so you can't see it.
ปีที่แล้ว
Hi Patrick, thanks for sharing your knowledge. My concentrator after 15 minutes shows a red LED and a beep. I read that the alert is due to low oxygen levels. What could be done in this case?
hi Patrick, i realize this is an old post and i hope that you monitoring it. i take it you are a technician in this field ? i viewed all your videos regarding the everflow concentrator. always great when people share their knowledge. what i need to know is how many events can cause the warning lights and beeper to turn on and stay on. i was asked by a wild bird rescue organization if i could try to fix this issue as this machine is greatly needed to help keep sick or injured birds alive while they are treated. the only video that mentions one possibility was due to a air leak, but could there be other problems ??? any help would be greatly appreciated.
What do you do to refurbish an Everflo with OPI to leave it good as new? Do you fix anything, change parts or you just change filters and zeolite minerals?
If the opi is working and it doesn't alarm It should be putting out over 90% If the ball is floating up-and-dow usually the solenoid valves If the opioid light comes on after you change the filters probably needed probably needs new sieve beds I always put it on an analyzer to make sure the purity is the purity is good
I have been looking for someone to fix my dads. We can’t get anyone to come where I live because it so far out 😂 I changed both filters and vacuumed dust. I noticed the tubes are yellow and where the air is first pulled in to the bacteria filter it is almost like yellow sap. I’m assuming I should replace those tubes. But is there anything you can tell me to help me diagnose the problem? The red light and alarm are continuous.
thanks a lot very helpful, my device tubes all gone dry and broken , now don't know how to vonnevt the new tubes from sensor to valve to switch to beds ,, my machine in mess Gosh!
I own an EverFlo and am having troubles. The yellow light is on steady and the red light blinks intermittently along with intermittent beeps indicating poor oxygen supply. It is set at 3 LPM and I have checked at the canula and I am receiving 3 LPM at that point. Have run machine with tubing removed and filter removed so there are no restrictions and still get the alarm. Any idea what this could be? I will be happy to buy the parts from you if you can give me an idea what is causing this. I Thank You in advance.
Mine smells like it is burning after an hour or so of operation. Is this normal? The outside of the device, along with the power cord, doesn’t give off any heat. No alarms either. Thank you!
Hi. Please can you help me, i have a problem with the flow meter: the black ball is blocked at the top and don't move up and down when turning the flow button.
Hi, Thank you! I'll take the used one for $27 w/shipping. I got phone number off your website so that's the number I will be calling to give you my CC info. Since I'm in NY I will call you tomorrow afternoon because I have appointments all morning. This is the hardest part I ever hunted for.... Phillips told me that the Trilogy O2 outlets connectors would work in an Everflo... Well, it didn't. So I'm so happy that I found you and that I can get one from you. Thanks again, I will call you tomorrow afternoon. Thanks, Jennifer
We have a problem. The alarm and red light come on exactly at 10 minutes. We are from Venezuela and there are no spare parts here. What can we do? Please help me
Ditch the stupid music! You are not talking directly into the microphone and the music is overpowering your voice. People should learn about sound and acoustics before simply turning on a camera!
Why in gods name does this guy think that air comes in from the top and out the bottom when heat rises...so automaticaly you'll know heat building up inside would be forced out the top and cool air in from bottom...main reason why there are filters in the bottom grill area and not the top...but i could be wrong and heat does fall....(sikes) nice cleanup btw
Fan takes the fresh air from the top and blows it through compressor and gets out from the bottom. There is a dust filter in front of the top grill. There is no filter in the bottom because no need for that. And one a plastic (gray) filter where the compressor takes air in.
What is the tool used to get the back cover off the unit and where can I get it? Thanks
Very helpful. My alarm keeps going off so I'm going to look at the bacteria filter since I've replaced the main filter. Thank you!
Good luck The last ones always had clear plastic ones. The one I have now is gray plastic....so you can't see it.
Hi Patrick, thanks for sharing your knowledge. My concentrator after 15 minutes shows a red LED and a beep. I read that the alert is due to low oxygen levels. What could be done in this case?
Hi sorry to bother you how much is the final bacteria filter and where can I order one please 🙏
Great video
Nice information Bro
hi Patrick, i realize this is an old post and i hope that you monitoring it. i take it you are a technician in this field ? i viewed all your videos regarding the everflow concentrator. always great when people share their knowledge. what i need to know is how many events can cause the warning lights and beeper to turn on and stay on. i was asked by a wild bird rescue organization if i could try to fix this issue as this machine is greatly needed to help keep sick or injured birds alive while they are treated. the only video that mentions one possibility was due to a air leak, but could there be other problems ??? any help would be greatly appreciated.
where do you get replacement parts.? I live in India and I use one of thei
What do you do to refurbish an Everflo with OPI to leave it good as new? Do you fix anything, change parts or you just change filters and zeolite minerals?
If the opi is working and it doesn't alarm It should be putting out over 90% If the ball is floating up-and-dow usually the solenoid valves If the opioid light comes on after you change the filters probably needed probably needs new sieve beds I always put it on an analyzer to make sure the purity is the purity is good
Yo le puedo ayudar.
Solucionó su problema ?
@@AbrahamArellan Sí, encontré una asistencia técnica aquí en mi ciudad. Muchas gracias!
Hey my concentrator turns on and after an hour the red light turns on what’s wrong with it
I have been looking for someone to fix my dads. We can’t get anyone to come where I live because it so far out 😂
I changed both filters and vacuumed dust. I noticed the tubes are yellow and where the air is first pulled in to the bacteria filter it is almost like yellow sap. I’m assuming I should replace those tubes. But is there anything you can tell me to help me diagnose the problem? The red light and alarm are continuous.
Same with my problem
. Can someone teach me how to solve this probem
What causes you to get a chemical smell coming from my oxygen machine?
Thanx 4this info. Does it have HEPA filter? Invacare does which makes me lil not sure which one to buy. Any ideas?
thanks a lot very helpful, my device tubes all gone dry and broken , now don't know how to vonnevt the new tubes
from sensor to valve to switch to beds ,, my machine in mess Gosh!
Yo le puedo ayudar.
Solucionó su problema ?
So I cleaned it out and. Some how one of the power plugs for the power cord came undone and I do not know where it goes back in
I own an EverFlo and am having troubles. The yellow light is on steady and the red light blinks intermittently along with intermittent beeps indicating poor oxygen supply. It is set at 3 LPM and I have checked at the canula and I am receiving 3 LPM at that point. Have run machine with tubing removed and filter removed so there are no restrictions and still get the alarm. Any idea what this could be? I will be happy to buy the parts from you if you can give me an idea what is causing this. I Thank You in advance.
0:12
Yo le puedo ayudar .
Solucionó su problema .?
Saludos
Mine smells like it is burning after an hour or so of operation. Is this normal? The outside of the device, along with the power cord, doesn’t give off any heat. No alarms either. Thank you!
Try opening it an vacuuming the dust.
It happens for new machines, it will be gone after 3 days of use.
Hi. Please can you help me, i have a problem with the flow meter: the black ball is blocked at the top and don't move up and down when turning the flow button.
When you pull off the tubing does it go to the top
Usually that's caused by a blockage in the tubing pull off the tubing if the ball goes to the top replace the tubing and cannula
If you pull off the tubing and the ball still doesn't move it could be a cracked flow tube or something disconnected inside behind the flow tube
Yo le puedo ayudar.
Solucionó su problema ?
I need an instruction
My consentrator over heat and not making oxygen . What can I do.
Ever flow oxygen concentrator showing Red alarm continue
Hey what is the issue
Can you tell me where I can gets parts? I was changing the disc filter and broke one of the white adapters on the o2 flo meter. Thank you
We can sell a used Flow meter 27.00 includes shipping call with a credit card we will ship it out ASAP or look for a non working unit online
Hi, Thank you! I'll take the used one for $27 w/shipping. I got phone number off your website so that's the number I will be calling to give you my CC info. Since I'm in NY I will call you tomorrow afternoon because I have appointments all morning. This is the hardest part I ever hunted for.... Phillips told me that the Trilogy O2 outlets connectors would work in an Everflo... Well, it didn't. So I'm so happy that I found you and that I can get one from you. Thanks again, I will call you tomorrow afternoon. Thanks, Jennifer
Where order tanks of zeolite for Philips everflo
Plz make a vidio mane filtar ( Big tube ) opne nd clean
There are 2 filters intake and final bacteria I have videosayon both changes
Como Faso para compra peneira do cilindro do cocentrador
We have a problem. The alarm and red light come on exactly at 10 minutes. We are from Venezuela and there are no spare parts here. What can we do? Please help me
Yo le puedo ayudar.
Solucionó su problema ?
@@AbrahamArellan gracias, ya pude solucionar
Compressore not working what to do
Yo le puedo ayudar.
Solucionó su problema ?
Pueden hablar en español po favor
OMG man, do you have that annoying chord sequence on all your videos? WHY????
Ditch the stupid music! You are not talking directly into the microphone and the music is overpowering your voice. People should learn about sound and acoustics before simply turning on a camera!
Why in gods name does this guy think that air comes in from the top and out the bottom when heat rises...so automaticaly you'll know heat building up inside would be forced out the top and cool air in from bottom...main reason why there are filters in the bottom grill area and not the top...but i could be wrong and heat does fall....(sikes) nice cleanup btw
Fan takes the fresh air from the top and blows it through compressor and gets out from the bottom. There is a dust filter in front of the top grill. There is no filter in the bottom because no need for that. And one a plastic (gray) filter where the compressor takes air in.