Hi popat pandhare, As per MSA manual miss rate 2% is acceptable for study, because we will select few samples very close to the border spec. It will give ambiguity to appraiser. As per IATF manual attribute NG acceptance should be zero. If any deviation or acceptance received from customer, it may be accepted.
th-cam.com/channels/bsoHyXxtAelbMYicLaHQGQ.html
You are very great sir👌
Thank you
Very well Class.thanks sir
Thank you Shankar
Dear sir miss rate 2%is acceptable but in IATF manual clause 8.6.6 attribute dimension acceptance shall be zero why?
Hi popat pandhare,
As per MSA manual miss rate 2% is acceptable for study, because we will select few samples very close to the border spec. It will give ambiguity to appraiser.
As per IATF manual attribute NG acceptance should be zero. If any deviation or acceptance received from customer, it may be accepted.
Cpk vs ppk full detail example oda explain pannuga sir
It is already in our list. Many other friends also asked the same
In 16:18 linearity is said to be under location variation, but at 16:58, it is said as width variation. pls clear myself
Hi Nishanth, i appreciate your observation. It is location variation only. I have mentioned wrongly as width variation during explanation.
@@newmechanicalmind8818 thank u very much for the explanations and kind reply
Profile projector mechine to check the dimensions of the product
Hi Elumalai, i will plan in future
Band width is right word
Noted Shankar
Radius gauge and cap thickness gauge
Radius gauge is used to check the radius of the part.
cap thickness gauge is used to check the thickness of tubular component