ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
PART 2 - 3D LED Backlit Letter Sign Tutorial: Wiring, Assembly, Layout and Installation
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- Due to a large response from some pictures that I posted on social media of this LED lit sign that we just made and installed with people asking for a tutorial. I have worked for the last week to put this tutorial together detailing how I designed it, programmed the toolpaths, setup the layout, wired and installed it. There was a lot of content so I had to split it into two parts. This second part covers the wiring, assembly, layout and installation of the sign.
LINKS:
8-32 EZ Lok Threaded Inserts - amzn.to/2K7pWHS
12V Power Supply for LED - amzn.to/2X5i7b0
12V White LED Strips - amzn.to/33OKAnO
8-32 Threaded Rods (2" Long) - www.mcmaster.c...
8-32 Flange Nuts - www.mcmaster.c...
If you have any questions, please let me know in the comments below. I hope you find this tutorial helpful. - Erick Royer
For more information on Stepcraft, please visit www.stepcraft.us or email us at info@stepcraft.us
Thanks a lot! Greetings from a Colombian guy in Dominican republic
Great video. Learning about LED Lighting is a priority of mine & it's not easy to learn the basics. This video helped a lot. I'd love to see more on LED splicing, arraignment, and power connection basics. Thanks for posting this. 💡
Master piece It took some time but I did.
THANK YOU (Y)
Great another, Thank you again.
Thanks for the tutorial. This is very cool.
More than beautiful
Good job!
Very well explained
Alex
PA Sign Makers
Philadelphia, PA
Great video
I was looking for similar to this but for outdoor😭😭
What type of connection do you use. Series or parallel?
Backlit letters in 3d design using html and css
Amazing
Certainly late to the show, but where did you/y’all get the sintra or acrylic?
What do you charge for something like that?
3D sign board master fitting jobs
What wires would I need to buy for a RGB LED ?
Great video. Just what I have been looking for. The link for machining the letters on the CNC was not found. Can you send it. I have the same CNC software and I would like to make similar letters. Ken K
Nice work sir mera acrylic letter ka kaam hai mera bhi channel hai videos banaya hai aap mujhe batao koi galti hai kya aap ka video mujhe bahot pasand aaya 👍👍👍👍👍
what awg wire did you use?
perfect
Where is part 1???
How did you secure the plastic to the PVC?
At the 14:00 mark he threaded a nut on the stud which holds the acrylic on the letter. Hope this helps
What did you use for the acrylic diffusion?
I used White Translucent HDPE plastic
Highly doubt that's within electrical code
A little overly complicated but you struggled through it.
wooow! 😊
what is the material of the letter??? and how thick???
thank you! 😁
.75" PVC (Sintra)
@@StepcraftInc thank you! :)