These trucks from WPL are really good as there are loads of upgrades. Some really fine builds on here🙌🏼 mines is almost complete after metal everything built in and structure made into one piece.
Great video, brother! I have a WPL C24 kit coming, so your videos have been super helpful in knowing what to expect with the build process. Appreciate the time and effort you put into making these vids! 👊😎
After seeing yours run, I noticed I had the same 2wd issue on mine due to drive shaft slippage. Took it apart and locked it up with super glue. Problem fixed. Thanks for the nice video.
Hi! I just checked out your video, thanks a lot for the very detailed explanation how to protect the wires! I have ordered a Quickrun 1060 wich should do the job in my wpl with the 370 motor. I am not quite sure how to hide this rather big esc but i am sure it is manageable! Thanks again for putting out your great expertise! Greetings from Austria
I believe you'll need to swap the electronics with one of the new WPL boards, which could have the benefit of engine sounds too if you choose the right one. Or change to hobby grade electronics
Im having an issues with the motor not turning sometimes it will go back and forth then ill stop working and the steering continue to work. The red LED lights up when you hit the throttle back and froths.
I placed a 10A ESC with 6CH receiver and a 370 motor on my C24. It runs but doesn't have reverse. Also using a 6CH radio. Can you help? Thanks in advance.
Does your esc have reverse? And I'm guessing you've checked your transmitter. Haven't seen to many 6 Channels without reverse but I mean throttle trim or any other settings it has
I haven’t driven the truck for quite a while, but I remember the brakes working in forward/brake/reverse mode but there not being any noticeable drag brake in forward/reverse mode. When I get to the electronics on the C44KM I’m going to be a bit more scientific about the testing
Am the only person in the world who has ordered the front and rear full metal axle & drive shafts mod for this truck ? By the way I’m enjoying your videos a lot you are doing a great job 👍
There's no brake, just forward/freewheel/reverse. Given the size and weight of the truck it works rather well though, with the weak motor you can give it a little reverse to slow things down without instantly flipping the truck.
These trucks from WPL are really good as there are loads of upgrades.
Some really fine builds on here🙌🏼 mines is almost complete after metal everything built in and structure made into one piece.
Great video, brother! I have a WPL C24 kit coming, so your videos have been super helpful in knowing what to expect with the build process. Appreciate the time and effort you put into making these vids! 👊😎
Same here.
After seeing yours run, I noticed I had the same 2wd issue on mine due to drive shaft slippage. Took it apart and locked it up with super glue. Problem fixed. Thanks for the nice video.
this is a great video mate..thankyou i will be doing the same to mine shortly..few more bits needed to do it properly
Hi!
I just checked out your video, thanks a lot for the very detailed explanation how to protect the wires!
I have ordered a Quickrun 1060 wich should do the job in my wpl with the 370 motor. I am not quite sure how to hide this rather big esc but i am sure it is manageable!
Thanks again for putting out your great expertise!
Greetings from Austria
Do you have any tips on choosing an esc for the stock motor? I got the RTR version and want to upgrade the electronics to work with my own rx and tx
Please,, I have GOT to know where you got that wire cutting/stripping tool!!!!!!!!!!!
Nice work me my son are fly boys and we have just got into crawling it's lots of fun with lots of mods ☺👍
Can you give me some info on your 'Wire Stripper' tool please ? Very helpful video. Thanks for posting.
Thank you for the video Sir :-)
how to make from a toy grade rc car an hobby rc car
very nicely build
gotta love those small crawlers
Great job! Btw can I get proportional steering if I replace servo on my stock C14? Thnx.
I believe you'll need to swap the electronics with one of the new WPL boards, which could have the benefit of engine sounds too if you choose the right one. Or change to hobby grade electronics
What type of esc are you using? Thanks
Im having an issues with the motor not turning sometimes it will go back and forth then ill stop working and the steering continue to work. The red LED lights up when you hit the throttle back and froths.
where you have set up the circuit for the lights
Looks so great.
Hello Friend
Where can I get a plier like that?
Thank you for sharing this ...i`ll follow step by step..Big tumb up..
You do a driveshaft vid yet?
I placed a 10A ESC with 6CH receiver and a 370 motor on my C24. It runs but doesn't have reverse. Also using a 6CH radio. Can you help? Thanks in advance.
Does your esc have reverse? And I'm guessing you've checked your transmitter. Haven't seen to many 6 Channels without reverse but I mean throttle trim or any other settings it has
How’s the drag brake working with that esc? I can’t get mine to slow my truck down even on some pretty small downhills.
I haven’t driven the truck for quite a while, but I remember the brakes working in forward/brake/reverse mode but there not being any noticeable drag brake in forward/reverse mode. When I get to the electronics on the C44KM I’m going to be a bit more scientific about the testing
Im waitting for axle gear solution.
Coz i have same problem.
do you, client work on trucks like eight -teen wheeler trucks like converting a push around trucks to rc. If so I have one for you to do for me
Awesome video
Can you send me a link to the parts. Thank you
Hi Nick, another great video. 😀 👍 👍 👍
I’m using 2 850 mah 1s lipos with jst series plug
how did u fix the drive shaft
Nice job on the video, thank you.
Would you be willing to share a full electronic list of the items you used on the C-14 & B-1.
Is it that difficult?
Ive just ordered one great tips well explained my friend this is my go-to series when my order turns up👍😎😊😊👍
Am the only person in the world who has ordered the front and rear full metal axle & drive shafts mod for this truck ? By the way I’m enjoying your videos a lot you are doing a great job 👍
Paul Blanchard nope, I ordered my axles before I ordered my kits. This way I'll have them ready to go when I strip/break the plastics.
I take it that's a fwd/rev esc with brake?
There's no brake, just forward/freewheel/reverse.
Given the size and weight of the truck it works rather well though, with the weak motor you can give it a little reverse to slow things down without instantly flipping the truck.
Cool
Is all you need to get it running is just getting is an esc, reciever, controller, battery, charger.
Sounds about right, good luck!
Dose anyone know why my c14 don't reverse right away after doing this mod ??
most likely cause is that you used an ESC with brake which would require you to reverse twice before it actually moves
most likely cause is that you used an ESC with brake which would require you to reverse twice before it actually moves
Yes exactly ... So what is the fix ?
Figured it out thanks 😁
@@kevinc1989
Braking is necessary!!!
Or are you shifting from 200 kmh direct in reverse?
Probably not
nice work and look :)
Thank you fine sir!! M
Need full metal axel 😊 nc video
LOL,,, 3:11 he said underware. LOL.. Hey,, this is my mid life outlet, lemme have it.