I thought I got the wrong size belt until i watched this video and saw the pulley set up. Then i realized i just put it in wrong. My dryer now works thank you 5/5 would recommend
Thanks for putting the time to do this video. I'm replacing my rollers today so wish me luck. By the way, I don't know if it's a good idea to put lithium grease on the rollers due to all of the lint floating around inside that dryer. That may get caught up in that grease, but just my two cents.
A moisture sensor is where the is by the lint filter to get to your belt some machines to take the whole front face off I have videos on it thanks for watching
And the motor & pulley are side by side in the thumbnail, but the video they're arranged vertically. Clearly 2 different dryers! I would gladly pay a repair man than listen to this guy drone on about cleaning parts & crinkled belts again!
....without the tension of the belt the pulley system sits side by side. It gets pulled vertical when you put the dryer belt on. I litterally just had to replace my dryer belt and i thought it was to big because it sat side by side. Thankfully i watched the video and saw that the belt had to set the pulley vertical.
The only message it will "send" is that the dryer controls will light up, but when you push the start button nothing will happen. When you take the top off the dryer, you'll be able to tell immediately if the belt is broken worth it has just come off the pulley.
@@carmac1652 yep! I'm just complaining about the design. The belt slipped off when reassembling, because the tumbler moved, so had to disassemble... again. Haha
You have to take the top off and the front panel completely off then you will have access underneath to replace the belt .I have a video on it . They're usually Maytag .that are not easy . thanks for watching 👍 I will put up the link
Samsung is complete junk. Bought washer/dryer combo - middle of road quality (about 1450 for the pair). 2 sets of suspension rods, drain solenoid and housing assembly and a lid pin upgrade kit... then the control board went out. It was 3 years old. Threw it out. Dryer started making noise and just stopped spinning. Now the unit trips the breaker. May be heading for the scrap pile. Don't buy samsung junk. They are pretty and work well at first but they don't last long and replacement parts are garbage.
Hi there, Thank you for your sharing! Your videos are very helpful to those of us who are new to DIY repairs. I am employed by Amazon part supplier, I can help you by offering you brand new replacement parts for free. Would you mind letting me know your email? I could provide more detailed product information for selection and send our products to you, I hope you can use and test our products.
Omg. . .put the model number in the description!! And learn how to use a camera!! "Watch what my hands are doing". . .dude, your hands aren't even in the frame!!
Nice video I almost pissed my pants laughing about the twist in the belt part Thanks again
Nice video. Helped me get my dryer back together after replacing the heating element.
Thanks for watching happy new year all the best 👍
Great video. After 12 years my belt broke. Can't complain too much about that. Fixing today. Thanks bud!
Thanks glad to help out thanks for watching happy new year all the best 👍
I thought I got the wrong size belt until i watched this video and saw the pulley set up. Then i realized i just put it in wrong. My dryer now works thank you 5/5 would recommend
Thanks for Watching 👍
Same!
Thanks was able to fix my dryer!!!!
Your welcome thanks for watching 👍
Excellent video! Thank you!
Thanks for watching and support 👍
You are the bomb. Thanks for posting this.
Thanks for watching and support
THANKS!!! Saved me hundreds on dollars!
Thanks for watching
One of the only ones that showed how to put the belt back correctly
Thanks for watching don't forget to subscribe I have many more how to do . and make money on flipping appliances
Thanks, I used this today!
Thanks I'm glad I can help you out 👍
Great video. Thank you very much
Thanks for watching
I used to think Samsung was good quality, until I bought some of their appliances.
Yes there crap .
Thanks for putting the time to do this video. I'm replacing my rollers today so wish me luck. By the way, I don't know if it's a good idea to put lithium grease on the rollers due to all of the lint floating around inside that dryer. That may get caught up in that grease, but just my two cents.
Yes you could be right .I have another product I will show you on my next video . thanks for watching 👍
Really helpful. Thank you!
You're welcome thanks for watching and your support 👍
What’s the best brand for appliances?
LG and Bosch Bosch is the best 👍
Thank you did it yesterday
I'm glad thanks for watching hope you subscribe. Thanks again 👍
is that where the sock monster hides
Lol yes . thanks for Watching 👍
My Samsung moisture sensor doesn’t have an access panel in the back for the belt?
A moisture sensor is where the is by the lint filter to get to your belt some machines to take the whole front face off I have videos on it thanks for watching
And the motor & pulley are side by side in the thumbnail, but the video they're arranged vertically. Clearly 2 different dryers! I would gladly pay a repair man than listen to this guy drone on about cleaning parts & crinkled belts again!
....without the tension of the belt the pulley system sits side by side. It gets pulled vertical when you put the dryer belt on. I litterally just had to replace my dryer belt and i thought it was to big because it sat side by side. Thankfully i watched the video and saw that the belt had to set the pulley vertical.
Thanks!! So, if that pully drops, it'll send a message that the belt broke I guess, 'eh?
Yes there's a switch on the Polly . thanks for watching
The only message it will "send" is that the dryer controls will light up, but when you push the start button nothing will happen. When you take the top off the dryer, you'll be able to tell immediately if the belt is broken worth it has just come off the pulley.
Mine doesn't have the removable access panel on the back. It's damn near impossible to get that belt back on
What dryer do you have .?
@@carmac1652 Samsung as well. Almost identical, it just doesn't have the access in the back.
@@processpsych ok you have to take the Front pannal of
@@carmac1652 yep! I'm just complaining about the design. The belt slipped off when reassembling, because the tumbler moved, so had to disassemble... again. Haha
You have to take the top off and the front panel completely off then you will have access underneath to replace the belt .I have a video on it . They're usually Maytag .that are not easy . thanks for watching 👍 I will put up the link
Samsung is complete junk. Bought washer/dryer combo - middle of road quality (about 1450 for the pair). 2 sets of suspension rods, drain solenoid and housing assembly and a lid pin upgrade kit... then the control board went out. It was 3 years old. Threw it out.
Dryer started making noise and just stopped spinning. Now the unit trips the breaker. May be heading for the scrap pile. Don't buy samsung junk. They are pretty and work well at first but they don't last long and replacement parts are garbage.
Hi there, Thank you for your sharing! Your videos are very helpful to those of us who are new to DIY repairs. I am employed by Amazon part supplier, I can help you by offering you brand new replacement parts for free. Would you mind letting me know your email? I could provide more detailed product information for selection and send our products to you, I hope you can use and test our products.
Hi I would like to do a review . tonytt888@hotmail.com
@@carmac1652 Thank you for your reply! I will contact you by email! Love you!
Omg. . .put the model number in the description!! And learn how to use a camera!! "Watch what my hands are doing". . .dude, your hands aren't even in the frame!!
You're the only one complaining I guess we all have bad day's 👍