I'm still learning mods since 4 years ago. When I ran into Chosen's videos,it's a game changer. I mean ChosenArchitect is the one that encouraging me, and defo the main reason that I learn the mods and keep doing it. I've learned so much.
I made a new save in the latest update after my original one got corrected. It is what it is. I had a only 500k emc and hadn’t gotten netherite even. Much better automation in new save.
for the molecular assemblers, it's not really an issue with the amounts of crafts concurrently, as with 3 co-processors, the waiting time comes from those anyways. later on, when you get the extended molecular assemblers, you'll need 23 co-processors, or 6 mega co-processors to completely fill 3 adjacent extended molecular assemblers (which is the minimum touching a pattern provider in this setup). the limiting factor will usually be the pattern space, so it's actually better to just put the patterns together especially if you hide full pattern providers for organization. if crafting speed ever really becomes an issue for some items, then it's time to switch to RFTools crafters for them. also: you can shift click most ae2 components in the air to split them (cells and processors) so if you were to store the 4k's, you might as well store 3 4k circuits and 3 processing units
I usually don't comment, think this is my second TH-cam comment that I can remember, but I just wanted to say that I love the pack so far. Haven't played modded Minecraft in years, but decided to try ATM9 from stumbling upon your videos and got hooked again. Just got a fully upgraded chunk destroyer and was about to get seriously into the tech side of things. Then I started watching this series and saw that ProjectE is basically the good old equivalent exchange that I remember from my Tekkit Classic days before it was changed, which has always been my go to mod pack for when I want to play modded, so I had to switch. Can't wait to get to the same point and start testing the new tech mods and see what this pack really has to offer. Keep up the good work :)
@@Volgin. Yes, however there is a different solution for this I believe. I haven't made the tower setup myself so it's not 100% tested, but from my brief trial using a stack of 3 Inscribers the Circuits don't get pushed into empty Inscribers if you set the Automation Access Mode to specific sides only (2 squares divided by a line, instead of 3 squares). It seems that for a Pattern Provider it doesn't matter too much, it can still push the material through the sides, it just won't push into top or bottom, but in this setup it doesn't matter.
@@dejsimiwerkin8681 Just tested yesterday, you can stack them all and set as you said, 'specific sides only'. Only the last inscriber that prints the final product must be set the other way for some reason. Made two clusters of extendeds and they fly
WOW, I got incredibly lucky! I got the Transmutation Interface from the EMC link quest! 😮😂 I don't even have any big emc automatization yet 😅 (just the hearth of sea villager).
I would very much recommend upgrading to the extended ae versions, every block is basically 4 in one. Set up a autotrader trading skystone steel and auto export emeralds and you will have more then you need quite fast
Personally I like to have a requester keeping the system in stock with a few thousand of each if the processors for AE2 or even Refined Storage if it's in the pack. That way the system isn't crafting all the parts that are needed.
Placing the molecular assemblers in that pattern vs filling all sides gives you a best case scenario of 3x slower. Worst case (eg: big craft where all moleculars are in use, a 27x speed decrease)
IF ANYONE NEW TO AE2 IS HAVING ISSUES WITH THIS SETUP REMEMBER TO HAVE ATLEAST A 4KCRAFTING CPU AND MAKE SURE TO REMOVE PRESSES FROM THE CRAFTING/PROCESSING PATTERNS. IF YOU DON'T IT'LL KEEP ASKING FOR PRESSES EVEN THO THEY'RE PREINSTALLED IN THE INSCRIBERS.
chosen, do you sometimes feel bored making the same setups for the same mods in the mod packs. I’m not asking in a sarcastic way, just genuinely curious
hey chosen, have u tried moving the 3 finished processor pattern to the top row inscribers? then there should be no interference with the other inscribers outputting at the bottom ;)
Ahh. All the AE stuff out in the open. Unlike my current run, where all the AE stuff is hidden in the walls, floors, and ceilings with facades , or between walls and floors in crawl spaces. With hidden framed doors and trap doors giving access to the crawl spaces.
Im really stumped with this problem. I cant ctrl click items to craft them, idk why but this is the only modpack where its ever happened so im assuming its a mod or something I just don't know which one
I really wish the EMC of the tiny charcoals and tiny coals of utilitiX were not removed, trying to calculate coals early game so thay I wont waste too much in my multi furnace is kind of a headache
I set up the applied energistics storage but I keep losing power to it. I have the same power source you do and all upgraded with the resonant integral components and the 3 auxiliary reaction chambers in each magmatic dynamo so idk why I keep losing power to my applied energistics storage. I had a stack of range cards in the wireless access point and I took have out so idk
I did this setup with two rows of four with 8 Inscribers worked like a charm, but unfortunately when upgrading to the Extended Inscribers this setup doesn't work :(
Hey the chisel chipped integrated has 2 block types that aren't obtainable in survival. Cobalt and platinum re not available in survival at least not anyway I can find myself. Theyre really nice blocks too can you fix that in the next update? I'll join discord after work today and ask their lol
Could anyone help, Everything is working good for the automation besides when i try to do the engineering or calculation processor it says I am missing a universsal press
Advanced crafting on a stick has a recipe but cannot be made due to missing an ingredient. Cyclic crafting on a stick is the required ingredient but is not in game. 😢😢
your inscriber automation doesn't work for me. silicon, gold, etc. get moved into the redstone slot for the processors instead of the correct slots for the circuits, blocking the whole crafting process and idk where the problem is
That doesn't sound correct... Something is off in your setup then. Make sure to check your recipes and also make sure that your presses are actually in the inscribers. Also the direction from which the inscribers are facing does matter.
@@ChosenArchitect the recipes and presses are correct, the pattern provider doesn't move items upwards into the other pattern provider but into the first possible slot which in this case is the redstone slot for the processors. Normally you would use export/import busses for this but I want to use multiple inscribers and keep it compact. Is it another mod which allows pattern provider to sort the items to the other ones and not move them to all adjacent inventories or is this also possible with just AE2?
@@ChosenArchitect I tried to change the order of the pattern provider and the items doesn't get moved into the first possible slot but always into the redstone slot from the processors. I tried to craft 2 Logic Processors but the items skip the circuits and go directly into the wrong slot.
Refined storage is just like AE1 while AE2 is a more complex and faster also a better storage mod also it takes time to learn and there isnt much guides on it
@@JasonAldeen-ln8gjit’s not stalking lil bro. All you gotta do is click on your lil Jason Aldeen profile pick and it shows all your recent comments, all of which are negative. Say, why is that your name anyway, lil bro? You got a crush on Jason Aldeen? Couldn’t blame ya for that one…
I'm still learning mods since 4 years ago. When I ran into Chosen's videos,it's a game changer. I mean ChosenArchitect is the one that encouraging me, and defo the main reason that I learn the mods and keep doing it. I've learned so much.
I made a new save in the latest update after my original one got corrected. It is what it is. I had a only 500k emc and hadn’t gotten netherite even. Much better automation in new save.
did you try the discord for help! there's a lot of info on there if you encounter issues... there shouldn't be world corruptions issues
The new room kinda gives me church vibes 😂 the co-processing units are like the stained glass windows. Love the series so far tho 🥰
for the molecular assemblers, it's not really an issue with the amounts of crafts concurrently, as with 3 co-processors, the waiting time comes from those anyways.
later on, when you get the extended molecular assemblers, you'll need 23 co-processors, or 6 mega co-processors to completely fill 3 adjacent extended molecular assemblers (which is the minimum touching a pattern provider in this setup). the limiting factor will usually be the pattern space, so it's actually better to just put the patterns together especially if you hide full pattern providers for organization.
if crafting speed ever really becomes an issue for some items, then it's time to switch to RFTools crafters for them.
also: you can shift click most ae2 components in the air to split them (cells and processors) so if you were to store the 4k's, you might as well store 3 4k circuits and 3 processing units
Why 23 processors? Isn’t it 4 crafts * 3 extended assemblers => 12?
I usually don't comment, think this is my second TH-cam comment that I can remember, but I just wanted to say that I love the pack so far.
Haven't played modded Minecraft in years, but decided to try ATM9 from stumbling upon your videos and got hooked again. Just got a fully upgraded chunk destroyer and was about to get seriously into the tech side of things. Then I started watching this series and saw that ProjectE is basically the good old equivalent exchange that I remember from my Tekkit Classic days before it was changed, which has always been my go to mod pack for when I want to play modded, so I had to switch.
Can't wait to get to the same point and start testing the new tech mods and see what this pack really has to offer.
Keep up the good work :)
Both packs are really good but you should really finish ATM9 too ;)
Loving this series! I feel like I’m learning so much more about AE2.
I finally understand why you would use coprocessors and why I need importers on my inscribers as they are set up on top of my pattern providers.
Love the content, can't wait to try the modpack out for myself
If you're using Extended Inscribers don't put your providers in blocking mode though, it'll push just 1 set of items instead of 4.
But it still suffers with the same issue where you must separate the stack from the last inscriber group, right?
@@Volgin. Yes, however there is a different solution for this I believe. I haven't made the tower setup myself so it's not 100% tested, but from my brief trial using a stack of 3 Inscribers the Circuits don't get pushed into empty Inscribers if you set the Automation Access Mode to specific sides only (2 squares divided by a line, instead of 3 squares). It seems that for a Pattern Provider it doesn't matter too much, it can still push the material through the sides, it just won't push into top or bottom, but in this setup it doesn't matter.
@@dejsimiwerkin8681 Just tested yesterday, you can stack them all and set as you said, 'specific sides only'. Only the last inscriber that prints the final product must be set the other way for some reason. Made two clusters of extendeds and they fly
Very good episode, first time seeing all of those AE2 beauties ✨
I feel like you did something different with your dialogue in this video, and I just wanted to say whatever it is, worked. Great stuff! Keep it up!
WOW, I got incredibly lucky!
I got the Transmutation Interface from the EMC link quest! 😮😂
I don't even have any big emc automatization yet 😅 (just the hearth of sea villager).
I would very much recommend upgrading to the extended ae versions, every block is basically 4 in one. Set up a autotrader trading skystone steel and auto export emeralds and you will have more then you need quite fast
I love AE2's crafting automation, but a small part of me misses the convoluted autocrafting from Tekkit and early Direwolf packs
This was more informational than any other tutorial I've ever seen. And it's not even really a "tutorial."
Personally I like to have a requester keeping the system in stock with a few thousand of each if the processors for AE2 or even Refined Storage if it's in the pack. That way the system isn't crafting all the parts that are needed.
That's a good idea!
how does this video not have more likes
Placing the molecular assemblers in that pattern vs filling all sides gives you a best case scenario of 3x slower. Worst case (eg: big craft where all moleculars are in use, a 27x speed decrease)
Chosen u have op i saw it in your inventory
IF ANYONE NEW TO AE2 IS HAVING ISSUES WITH THIS SETUP REMEMBER TO HAVE ATLEAST A 4KCRAFTING CPU AND MAKE SURE TO REMOVE PRESSES FROM THE CRAFTING/PROCESSING PATTERNS. IF YOU DON'T IT'LL KEEP ASKING FOR PRESSES EVEN THO THEY'RE PREINSTALLED IN THE INSCRIBERS.
Hey Chosen, Your Colossal Star and the Final Star have the same EMC
That was fixed in 3.1 version today
EP 10 world downloads not availlable anymore for TH-cam members? Discord not letting me fully join. Great play 🤠
chosen, do you sometimes feel bored making the same setups for the same mods in the mod packs.
I’m not asking in a sarcastic way, just genuinely curious
Honestly this is just my second time using a setup like this! After finding out how optimal it is it's really hard not to use this
hey chosen, have u tried moving the 3 finished processor pattern to the top row inscribers? then there should be no interference with the other inscribers outputting at the bottom ;)
Ahh. All the AE stuff out in the open. Unlike my current run, where all the AE stuff is hidden in the walls, floors, and ceilings with facades , or between walls and floors in crawl spaces. With hidden framed doors and trap doors giving access to the crawl spaces.
The automation whole looks quite small. Would it fit everything?
No there will be more rooms lol it's a temp room for now as this is still early on!
Looking forward to stealing, I mean, seeing your beautiful build 😁
Im really stumped with this problem. I cant ctrl click items to craft them, idk why but this is the only modpack where its ever happened so im assuming its a mod or something I just don't know which one
Fixed in the 3.1 version of the modpack
@@ChosenArchitect omg thank you so much man🙏 I’m having so much fun with your pack and that was the only complaint I had.
Is it possible to add Immersive Engineering and Ad Astra to the modpack for myself? I would love them for the builing opportunities.
I really wish the EMC of the tiny charcoals and tiny coals of utilitiX were not removed, trying to calculate coals early game so thay I wont waste too much in my multi furnace is kind of a headache
I wouldn't get caught up on those small things... You can break trees with your fist and break 64 logs all in one go
Did you put a die plate in all inscribed or just one per of each?
I set up the applied energistics storage but I keep losing power to it. I have the same power source you do and all upgraded with the resonant integral components and the 3 auxiliary reaction chambers in each magmatic dynamo so idk why I keep losing power to my applied energistics storage. I had a stack of range cards in the wireless access point and I took have out so idk
I did this setup with two rows of four with 8 Inscribers worked like a charm, but unfortunately when upgrading to the Extended Inscribers this setup doesn't work :(
Why in my world the emc link doesnt have an emc value?
It does... Update your modpack
Idk if it’s a bug but my power is getting drained almost instantly and I’m producing a lot of it, happening right after I set my M.E system up
Hey the chisel chipped integrated has 2 block types that aren't obtainable in survival. Cobalt and platinum re not available in survival at least not anyway I can find myself. Theyre really nice blocks too can you fix that in the next update? I'll join discord after work today and ask their lol
My crafter keeps popping up the wrong solicon recipe?? It wants to use the white silicon but I’m using the grey one from the same mod. Weird.
Hey chosen, i know that you love your automation mod packs alot, have you ever thought about giving satisfactory a try?
I have flight satisfactory on Twitch :D I want to jump back into satisfactory when the new update drops the September
how do i keep my prgress on new updates?
Could anyone help, Everything is working good for the automation besides when i try to do the engineering or calculation processor it says I am missing a universsal press
Nvm figured it out
@@elijahjarney Hey, what was your issue? EVERYTHING works besides my calculation press, even though they are RIGHT there with the right patterns
@@ItsHexical I needed to make sure I had all of the correct presses in the right slots I made some extra of certain ones on accident
why 3 co-procesing unit ?
New day 🧑🏻🏭🛠️
Advanced crafting on a stick has a recipe but cannot be made due to missing an ingredient. Cyclic crafting on a stick is the required ingredient but is not in game. 😢😢
your inscriber automation doesn't work for me. silicon, gold, etc. get moved into the redstone slot for the processors instead of the correct slots for the circuits, blocking the whole crafting process and idk where the problem is
That doesn't sound correct... Something is off in your setup then. Make sure to check your recipes and also make sure that your presses are actually in the inscribers. Also the direction from which the inscribers are facing does matter.
@@ChosenArchitect the recipes and presses are correct, the pattern provider doesn't move items upwards into the other pattern provider but into the first possible slot which in this case is the redstone slot for the processors. Normally you would use export/import busses for this but I want to use multiple inscribers and keep it compact. Is it another mod which allows pattern provider to sort the items to the other ones and not move them to all adjacent inventories or is this also possible with just AE2?
@@ChosenArchitect I tried to change the order of the pattern provider and the items doesn't get moved into the first possible slot but always into the redstone slot from the processors. I tried to craft 2 Logic Processors but the items skip the circuits and go directly into the wrong slot.
I wish if i can play this modpack
Can you add ender io to the mod pack please😊
you can add it yourself
i wish i could understand why people choose AE2 over Refined Storage.
i think i’m just dumb
@@AustinCwifin04 ae2 is for the smart people who want challenge, refined storage is for simplistic solutions
Refined storage is just like AE1 while AE2 is a more complex and faster also a better storage mod also it takes time to learn and there isnt much guides on it
Good things I have a guide on it 😃
Well if you watch this lp you will understand why! It can do way more them RS
America ya :3
Hallo hallo hallo
Hi 👋
hate create :/ i wish there was another way to craft the star...
Just get better. It’s not hard
The end is very simple and doesnt take much create knowledge to setup!
unc is taking it real slow... only 80mill emc atp, I had 100mill emc + 100k/s emc gen 10 hrs in. unc dragging it out for "content."
EMC ist my priority early on 😂
@@ChosenArchitect that's the whole point of the pack lil bro, is it not?
@@Doobjo why you stalking me lil bro
@@JasonAldeen-ln8gjit’s not stalking lil bro. All you gotta do is click on your lil Jason Aldeen profile pick and it shows all your recent comments, all of which are negative. Say, why is that your name anyway, lil bro? You got a crush on Jason Aldeen? Couldn’t blame ya for that one…
@@endingrobin2866 its my real name lil porkchop
Hey @Chosenarchitech my middle click doesn't work