2021 Project M Topper Full Tour | Four Wheel Campers
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2021
- In this full tour of the newest topper from Four Wheel Campers, we’ll walk you through Project M, a full-featured alternative to a slide-in camper. This truck topper conveniently fits on top of the bed rails and is clamped or bolted on.
It is unique in that the tailgate is not removed. The camper has its own hatch as well, allowing full access from the rear of the truck. Various sizes are available, depending on the size of the bed, while you can choose from six different colors as well.
The camper has an escape hatch, GearTracs, and six roof latches. Our walk-through of the Project M Topper covers a range of exterior features and options, plus an overview of the roof and optional add-ons including solar panels.
Roof interior features including a prewire package option, and camper interior features like the windows and screens, cabover bed, shelving, interior tracks, safety features, and power supply, are explained and demonstrated.
Also learn about the entire pop-up process. Our truck topper camper is easy to use and extremely convenient for spending time on the road. Explore the innovative Project M Topper at fourwheelcampers.com/model/pr.... - ยานยนต์และพาหนะ
I have rebuilt several vintage four wheel truck campers, I like the aluminum framing, always lighten them up by tossing out all of the old particle board.
Need same version but with barn doors!
Love it.
White would be superior
in the 100° heat we're having.
Love the giant window.
Prewired? Excellent!
Fits a Rubicon? Perfect!
sou inscrito no canal, e gosto demais dos videos que vc produzem, parabéns, Deus abençoe
Jack brackets! This is the first manufacturer I’ve seen offering those. I would only want this on a truck when going camping. Don’t need it driving to work or grocery store.
Very nice!
Awesome!
Really like the Project M...just wish y'all would figure out how to put one on a Gladiator.
watched and subscribed... I enjoyed watching
If it had a furnace i would be sold on this setup.
Genius
I like that fact that you can leave your auxiliary diesel tank in bed and slide upper bed over it.
How much for the raw, base version ( with cushions, and no bed shelves or wiring) ???? I really like it.
I've been looking for a more functional truck camper that will allow me to keep my bed... how would these work with the decked drawer system?
What about for a 2019 RAM 1500 with 5.7 bed?
I like everything about this except those benches. It limits ability to configure interiors.
so based on the fact it has tires, I'm going to guess that bracket will be round-robin right?
Available for the new 2022 Nissan Frontier?
Not bad,but dont like the lower sliding windows.should swing out like awnings.keeping out the rain and giving you access inside
You have one for Honda Ridgeline gen2?
I had every intention of buying one of these until i was told it would take 68 weeks to get it.
Are you sure it wasn't 6 to 8 weeks? Lol
@@steelontarget Just checked with the factory. Currently it’s 65 weeks…LOL.
@@rustynail7866 omg, that's insane.
Is this correct?
Deal killer
What’s the max load capacity on top of the roof if I were to use a roof rack?
We dont recommend more than 100 lbs.
I'm excited about this offering from you. A couple of things I would want to do is have a large solar charged battery pack like an EcoFlow Delta Max (I could also use at our cabin). No need for a charge controller then. I'd supply my own panels...but I would want everything prewired. Is there a chance you could use European style opening windows rather than the sliders you are using? We have a 2015 Toyota Tacoma access cab which has a bed length of 73.5"...I came to TH-cam from your website, btw. Thanks in advance. We'll be traveling throughout North America to include Canada, Alaska, USA and Mexico. We've done it before in VW campers, but I like this option as well, if not better. I like my Toyota.
Thank you for your interest. Please email dan@fourwh.com and I can respond. Have a great Tuesday!
Is there an option for front window to open for pass-through access to cab? Nice camper. Thanks.
Thanks!
We do not offer any pass through windows at this time.
Any orther rv dealer or repair shop can it happen for you after purchase. That's an easy add at almost any place you will take delivery. Many even offer a full rear window replacement for a power rear truck window (whole window). Stuck with the little window on the camper from the vendor but as soon as the warranty is up, go back and have a real window installed to match your truck window.
Do you make any campers that fit the Rivian R1T?
I am disabled. Need rapid access to porta potti in pop up camper with the top of camper down, not popped up. Is there enough height in the camper with the top down, not popped up, to allow an adult to use a porta potti?
There may be! It's best to visit your local dealer to be sure it will work for you needs.
How do you not freeze the fresh camper water? In the winter .
You have to figure out your own heater. For those less inclined to self build their own options should check out their slide in units
Is there a way to buy in Amazon ? Lol
What is the weight capacity of that bed? Mainly the section that pulls out.
We can guarantee 600lbs and our engineers rate it at 800lbs.
Any videos of 8ft models? Can't find it on yr website.
Thank you for your interest. The length difference between the 6.5' HAWK and 8.0' GRANDBY models is in the dinette. The HAWK sits two and sleeps three. The GRANDBY sits four and sleeps four. Look for GRANBY and other model video tours in April.
Any chance you have height dimensions on various factory spected rigs? My garage is 91" and I'd love to get a truck that pairs to slide right in. I may just need to sell my house...Ha!
Hi Dennis. Email me at dan@fourwh.com . What is your truck? Is it 4X4 or lifted?
I can provide our camper height info. Regards, Dan
How do you close yourself inside? Seems it would be hard to shut that tailgate behind you.
It's easiest to shut the tailgate, climb over it to the inside, then close the Project M hatch! Everyone figures out their own system.
This is exactly what I want…how much will it cost will all of the bills and whistles?
Hi Rodolfo, Thank you for your comment! Because there is a menu of options related to our campers please go to our website and click at the top on "Campers" and the "Project M" and then click on the blue "Build & Price" button. This will take you through all of the options and calculate a price and weight based on what you have selected. You can also contact the nearest FWC facility for guidance by clicking the "Find Dealer" button at the top of the website. Have a great weekend!
Do they make this camper to fit mid sized trucks?
Thank you for your interest. Yes, we sell campers for Tacoma, Ranger, Frontier, Colorado, and Canyon. Check out options at www.fourwheelcampers.com
This is a really fast cheaper way to go comfortable camping I wonder if a guy 6’7 could camp in this truck camper
What’s the max lift ur truck can have so u can still slide the camper in?
You could always put blocking under the jacks to accommodate whatever lift you have….?
Sorry if I missed it but what about heating options?
There are no built in heating solutions for the Project M.
I'd just put a buddy heater in it.
Is it still 15 to 18 months for delivery?
Thank you for asking. We are currently at 4 to 10 months from order to installation.
if u dont mind how much is the price for 6 feet camper
As of May 2023, the Project M Toppers start at $11k with plenty of options and addtions to customize your build.
Nice camper. Too bad you guys can't keep up with demand.
What's the length of the truck bed?
He said 4 lengths,5ftto8ft
This is perfect match with GMC Sierra multi pro tailgate!;)
We have models to fit most truck bed sizes!
@@FourWheelCampers Ford Ranger Tremor?? If so I’m in.
Do you have an authorized dealer in Southern California
We sure do! In Rancho Cucamonga . They would be happy to help you. (909) 870-1610
Yes - In Rancho Cucamonga we have 10+ campers on display at our store. See our store map by clicking "Find Dealer" at the top of our homepage www.fourwheelcampers.com. Thank you for your interest and have a great day!
The fact that these "cost" what they do and people "pay" that price is stupidity at it's apex.
10 grand for this???? Looks like it should be $800
Totally agree. What the hell? I’ll gladly pay for something that’s worth it and understand this isn’t assembly line build quality…. But…really … there are so many better options