Be sure to check out the other RAM Maintenance, Upgrade, and Performance videos on this channel! We are also working on project HellRAM and supercharging this 100k mile truck and documenting the full build on the channel 👍👍👍
Awesome vid. Thanks for the step by step. Bought a set of four from Amazon. Dealer wanted $236. Not including tax or installation. Took me about 15 mins to install all 4 thanks to you.
I just came across this as I was drinking my morning coffee, and immediately found my heat gun and went to work. Took me like 15-20 minutes to get the old ones off and another 10 minutes with WD-40 and a microfiber cloth to clean it up. I'm sure the Goof Off would probably be a little faster, but the WD-40 worked well and with a clean microfiber doesn't hurt the paint/clearcoat. My 2010 SLT is Beige/Gold with 96K on it, and I really like the way it looks now. The vinyl was kind of messed up when I bought it 3 years ago, especially the driver door, and the dealer wanted to charge me like $100 per pillar if I wanted them redone. When I saw this vid that showed the paint and clearcoat was under the vinyl, good bye! Good job man, now I have to watch the rest of your Ram videos! I plan on driving this truck into the ground. In 2016, I sold a 96 Tacoma to buy this one, so I'll let you know in 2030 what my next truck is!
Been contemplating removing mine since I have the same problem. On another note, since you're one of few people that does videos for the newer Ram's I feel like your channel should be more popular. Keep an coming!
Thanks brother appreciate the feedback! I'm doing my best to keep the content coming for our trucks and plenty more on the way! If you guys can do me a solid and share the videos you think are the best wherever you want it definitely helps and inspires me to keep making them! I enjoy making them either way but having more of a following and more comments and feedback definitely drives me! Either way thanks again everyone for your support so far and I have plenty more videos coming! 👍👍👍
Lebarron did you ever do this? What did you use? I am still thinking about using plastidip. Boosted never commented back to me on it so I was wondering what you used.
Just wanna say, I did this today. Easy removal. A bit of elbow grease with Goo Gone to remove the glue. But it’s beautiful now. I was back and forth about if it would look better but keep in mind the folded vinyl/cracking vinyl is gotta get removed even if I did a replacement vinyl. Removed looks great! This is the 2nd video of yours I’ve followed (first was the over head flickering light replace) and I’m so happy with both. Thanks again! I keep scouring your channel for move things I can do to make my life easier. You’re the best man. Keep up the good work.
Thanks for posting this! I've been wanting to take these darn decals off for at least the last year - mine looked horrible just like yours did - even the wrinkles were the same! A heat gun, some patience (the trick is to pull the decals off SLOWLY and then almost no adhesive will be left to remove) and some GOOF OFF on a micro fiber towel to remove the remainder of the residue. I'm not sure if I like the way it looks like this but it does look way better than it did with the deteriorating decals on there. Thanks again ! My truck is a red 2015 RAM Laramie Ecodiesel 4x4 Crew BTW.
Looks way better! I am going to do this to my 14-2500 and if I decide to go back I’ll use gloss vinyl to look similar to the window tint.. thanks for sharing this how to video!
Hi, I removed the b pillar vinyl from my Ram 3500 dually. Much better looking. Only thing to add is removing the adhesive. Mine was really thick. I used high strength goof off. No scrapping, just a lot of rubbing. Keep changing the sacrificial towel and keep it relatively wet. Thoroughly clean afterwards with alcohol and wax. You're done. Thanks, Benton
Thank for the tip. Used a heat gun in addition to the 103 degree hear here in Texas. They came off like butter. Used alcohol on the small glue spot. Blends in perfect because my truck is dark grey.
Done! Thanks again for posting this video, my truck looks way better now!!! And I didn't even use a heat gun. Just faced truck towards sun for 20 minutes then pulled off, turned truck around and repeated.
Mine went the exact same way yours did. Mines the deep cherry and was considering doing just as you did but was concerned the finish might not have been gloss underneath. Thank you for answering that question and I like it, especially on the silver. If you ever do apply any replacement please post so we can see the difficulty in doing that. Thank you again, love your rims/tire combo!
My truck is brand new and bird poop appears to have etched a stain in this part of my car. Can't get it off to save my life. This video is awesome as there is nothing else that explains this if you want to remove it completely and replace it. I may do that!
Watched this last night at work and removed mine today after waking up, much better look. I had notice how the edges in some areas was cracking and peeling up and had contemplated getting the stainless covers but ultimately I'm glad I went this route. Great video keep them coming.
I know this video is 3 years old but it's just what I needed. I already ordered my glasses pillar posts. Mine were matte and sun damaged. Hoping this makes it look nicer 🙏
Saw this video and had to try it. The vinyl on mine was peeling as well. They came off pretty easily. I learned quickly that the more heat you apply, the less glue residue will be left on the pillars. Great tip on pulling that screw out, I would've missed that. I think my truck looks better without it. Thanks for the video!
I completely de badged my 3500, got the front windows tinted...looks fabulous....now, the vinyl....is was looking to replace it..........the removal of it looks way better, and mine is messy.....thanks....
Finally, ram mods videos that are professionally done. I also appreciate keeping cost in mind. I'm retired and love my 2015 ram, so I'm always looking for things to trick out my truck. I also have an eleven year old great nephew who is my partner in crime who loves to "soup up", Sam the Ram. Keep up the good work!
Thanks for the support Kenneth! I'm doing my best to keep good content coming and mods that anyone can tackle at home. Also with the heavy modifications coming with the supercharger its going to be fun to document the progression of the truck with everyone. That way everyone can decide how much they want to tinker and what is worth the money and not 😁
Came across your video, looking to address the same fading, tearing problem on my truck. Problem solved. Thanks very much. I agree with you. I like the look.
So glad I found this video lol. Previous owner of my 2016 Rebel got F'n white paint fingerprints all over everything, and the only exterior part of the truck with the prints is this vinyl. Definitely removing mine as soon as I get home today, truck is black anyway so not worried about looks
Nice video. My 2013 Chevy Sonic has B Pillars with that same vinyl covering from the factory and it's got that wrinkle thing going on with it like your truck had. Luckily my car is already a dark gunmetal color so it could only look better by removing the factory vinyl. Also, I've learned from using a heat gun on other things that if you wear a cloth style glove on the hand that is exposed to the heat it helps keep your hand from getting burned if you're working on a specific spot for a long time.
Thanks for the response! It's weird all the manufactures are all putting this vinyl that can't stand the elements! Good to know you can take it off on your vehicle too! 👍
I have a Charcoal Metallic Ram and the pillars are the same color of the entire truck. I personally like it very much. To remove the glue, you can use GOOF OFF, it will not screw up your paint and take the glue rig off the surface.
John, my 2015 Tradesman didn't have it, but my 2017 Laramie does. Both trucks are Maximum Steel Metallic so, it isn't really noticeable. For now, I'll leave it on the 2017. But Thank You for posting this because now I know how to remove it if I decide to later.
I have the same truck, same vinyl that has the same wrinkle and was wondering what to do. I think this looks great, not to mention with the texture on the vinyl when it gets dirty or wax on it it's a pain in the ass to remove. Keep these video coming.
Thanks Don appreciate the feedback! Yeah I agree the textured vinyl is pretty lame. If anything it should be a nicer material but I'm going to leave this look for a little while at least! Thanks again for your support on the channel and plenty more videos on the way! 👍
BoostedMotorsports ... Couldn't wait to the weekend. went to harbor freight and picked up a $15 heat gun. Just finished one side, cleaned with Goo B Gone and looks great! Doing other side shortly. Thanks again for the awesome tutorial!
This definitely looks great! But I'm so indecisive cause I think the black looks good too. I suppose the good thing is that you can reapply the vinyl if you decide you'd rather have it back. I may do this. I'm also going to add the vinyl graphic to the hood and the tailgate because I like the sporty look and I think it looks good on the sport hood.
Thanks Saul! I agree looks better than that cheap wrinkled vinyl at least! Maybe we'll do something different with it later but for now I think it looks better! 👍
I'm just doing this on my dark grey 2009 and it's really stuck on there. The longer it's on there the more stuck. Got one side done. Lots of heat gun, plastic scraper, goo gone and microfiber cloth. Thanks for your video.
I agree Shawn! Looks much better than that cheap matte vinyl they come with! If anything I may switch it up with some nicer vinyl later but the color matched paint looks better than that wrinkled and peeling crap! Thanks again for your feedback and support on the channel, I appreciate it! 👍
Thank God! You just made my day. Thanks for uploading. Never had a vehicle with the vinyl like this and it's soo faded. I didn't realize it was this easy. TY :D
I was trying to take the weather strips off my Chevy Malibu 08 LS before I paint it but the closest video I saw to take the weather strips off was from a Malibu 2015 I got one off completely and the metal trim with it buy was gonna take all of them off because I took all my doors off before I paint it and the inside panels. What I should of did before taking the electrical system off my doors and taking the door out I should of rolled the windows down I have a cover over the vehicle now in backyard though. I took off the front grille, rear bumper, outside sideview mirrors, door knobs inside panels, doors, hood and trunk. I did all that a month ago just waiting for my parents to get the garage sale done before I bring it in garage and paint it. I would want to get a paint booth in future and a bigger air compressor but was in the process of looking to move rather in a house though. But when I do move I wanna be doing what God wants me to do for a job. Am in 40's and I don't want to keep working for someone else I wanna do what God wants me to do. I still like auto painting and detailing started liking both more in the last 2 years even though I never got a real good paint job yet actually got too much orange peel I see me doing better now. Plus I looked at a lot of TH-cam videos on auto painting and detailing videos too. Plus I have a lot of products now to use but I still wanna work for myself. I have had a lot of jobs in my life but the way I think now I should of thought like this when was in 20's. But I wasn't into painting then was more into videogames which now that ain't into nomore.
Looks great without the wrap on your silver ram! I had the same thing happen on my dark blue 13 ram and removed it but ended up not looking good with no wrap so went back and plasti dipped it!
Its suprising that nissan is very similar in exterior trim anchors and the vynle bullshit . I bought carbon caps they fit quite nicely and look legit as far a carbon
Thanks Bryan!! Can't wait to post up the new HID and LED setup I have for the headlights and fogs its an insane improvement! Should posted over the next few days but would love to get your feedback on those and the other videos too! Thanks again for the support! 🤙
That looks a lot better. I have a 2011 ram. The same thing is happening to mine. Its funny i have the wrinkle at the bottom and its chipping damn near in the exact same spot. Preciate the video man 👊
Thanks for this video! My b pillars have been looking like CRAAAAAAAAAP for a few years now....your video gave me the push to do it today and the truck looks great again! Took me about an hour, taking my time and using goof off for removing the glue. Mine is a 2012 so they are old stickers....LOL
I like it, been thinking about doing same but didn't really know what it would look like. I have also silver ram, mine has more chrome and I don't like much the black line the window seal line across the frame that you have now so maybe I will look for window seal chrome cover before removing my vinyl. Thanks Man, keep it coming.
I'm taking the rest of mine off as soon as we get a warm day. I took it off the drivers door without a heat gun, and it was extremely difficult to remove. Came off in little pieces. Used Goof off to get all the glue off. Now I have a heat gun. The rest hopefully will be a lot easier. Looks much better without!
Yeah that stuff is on there pretty damn good! Heat gun is definitely a must! Thanks again for your feedback Kurt appreciate it! More videos on the way! 🤘
I was literally thinking about taking that off myself today on my 2018 brand new Ram 1500, mine is a Delmonico Red pearl color so it looks even nicer. But I will replace it with a glossy one instead fully getting rid of it.
Try it out brother! Rock it with no vinyl for a week and see if you like how it looks. Then add the black vinyl if you prefer! Thanks for the feedback! 🤙
Thanks brother appreciate that! Keeps me motivated to keep making videos for sure! Plenty more on the way and can't wait to show you guys my HID vs LED comparison video for the fog lights and low beams on our trucks, I way shocked at the results! Those videos should be out this week too! 👍
I Like it, i'm going to do mine, drivers side is like yours and it is the second one, dealer replaced it for me under warranty They are really cheap you would think that Chrysler would put something better there.
Thank you for your explanation of all the videos for the maintenance of Dodge Ram, which helps me a lot.. I have a question, can I replace this piece of ruble with another of chrome, and if you can help me to get the part number
It's funny I've seen a lot of talk lately about removing that vinyl and I have to say I've never even noticed other Ram's had it. My 2013 is black so I guess they don't put it on black trucks.
Damn Gerald I guess I was wrong! I would definitely take yours off! It would look way better having nice glossy black between the windows than that matte vinyl!
Watched this video and removed off my car,the first pillar I was too keen to get the cover off quick and left a lot of glue which took a while to get off..the second pillar I took my time with the heat gun and peeling it,had a tiny bit of glue but not much.
My white 14 has the strip that will be removed but my black 17 doesn't. Not sure if I'm going to like the odd angles between the front and rear door glass. May be the reason for the trim pieces. Great vid.
Thanks Noell! I like the look for now. Worst case scenario you could always re-wrap it with better looking vinyl if you didn't like the look. I think that factory matte is pretty cheezy. Appreciate the feedback and support on the video though sir! 👍
Be sure to check out the other RAM Maintenance, Upgrade, and Performance videos on this channel! We are also working on project HellRAM and supercharging this 100k mile truck and documenting the full build on the channel 👍👍👍
Awesome vid. Thanks for the step by step. Bought a set of four from Amazon. Dealer wanted $236. Not including tax or installation. Took me about 15 mins to install all 4 thanks to you.
I just came across this as I was drinking my morning coffee, and immediately found my heat gun and went to work. Took me like 15-20 minutes to get the old ones off and another 10 minutes with WD-40 and a microfiber cloth to clean it up. I'm sure the Goof Off would probably be a little faster, but the WD-40 worked well and with a clean microfiber doesn't hurt the paint/clearcoat.
My 2010 SLT is Beige/Gold with 96K on it, and I really like the way it looks now. The vinyl was kind of messed up when I bought it 3 years ago, especially the driver door, and the dealer wanted to charge me like $100 per pillar if I wanted them redone. When I saw this vid that showed the paint and clearcoat was under the vinyl, good bye! Good job man, now I have to watch the rest of your Ram videos!
I plan on driving this truck into the ground. In 2016, I sold a 96 Tacoma to buy this one, so I'll let you know in 2030 what my next truck is!
That’s awesome brother! Thanks again for the support glad the videos are going to good use 😬🤟🤟🤟
Been contemplating removing mine since I have the same problem. On another note, since you're one of few people that does videos for the newer Ram's I feel like your channel should be more popular. Keep an coming!
Thanks brother appreciate the feedback! I'm doing my best to keep the content coming for our trucks and plenty more on the way! If you guys can do me a solid and share the videos you think are the best wherever you want it definitely helps and inspires me to keep making them! I enjoy making them either way but having more of a following and more comments and feedback definitely drives me! Either way thanks again everyone for your support so far and I have plenty more videos coming! 👍👍👍
Lebarron did you ever do this? What did you use? I am still thinking about using plastidip. Boosted never commented back to me on it so I was wondering what you used.
Just wanna say, I did this today. Easy removal. A bit of elbow grease with Goo Gone to remove the glue. But it’s beautiful now. I was back and forth about if it would look better but keep in mind the folded vinyl/cracking vinyl is gotta get removed even if I did a replacement vinyl. Removed looks great!
This is the 2nd video of yours I’ve followed (first was the over head flickering light replace) and I’m so happy with both. Thanks again! I keep scouring your channel for move things I can do to make my life easier. You’re the best man. Keep up the good work.
Thanks for the support Matt! Glad you are finding the vids useful as thats my goal with each one! Plenty more on the way 👍💪
Thanks for posting this! I've been wanting to take these darn decals off for at least the last year - mine looked horrible just like yours did - even the wrinkles were the same! A heat gun, some patience (the trick is to pull the decals off SLOWLY and then almost no adhesive will be left to remove) and some GOOF OFF on a micro fiber towel to remove the remainder of the residue. I'm not sure if I like the way it looks like this but it does look way better than it did with the deteriorating decals on there. Thanks again ! My truck is a red 2015 RAM Laramie Ecodiesel 4x4 Crew BTW.
Looks way better! I am going to do this to my 14-2500 and if I decide to go back I’ll use gloss vinyl to look similar to the window tint.. thanks for sharing this how to video!
Hi, I removed the b pillar vinyl from my Ram 3500 dually. Much better looking. Only thing to add is removing the adhesive. Mine was really thick. I used high strength goof off. No scrapping, just a lot of rubbing. Keep changing the sacrificial towel and keep it relatively wet. Thoroughly clean afterwards with alcohol and wax. You're done.
Thanks, Benton
Thank for the tip. Used a heat gun in addition to the 103 degree hear here in Texas. They came off like butter. Used alcohol on the small glue spot. Blends in perfect because my truck is dark grey.
Did this on my 09, 11, and just picked up my 16 and I will be taking it off this weekend before I put on the rain guards!
🤘🤘🤘😎
Done! Thanks again for posting this video, my truck looks way better now!!! And I didn't even use a heat gun. Just faced truck towards sun for 20 minutes then pulled off, turned truck around and repeated.
Thats awesome brother! Glad you got her all cleaned up! 👍😎
Mine went the exact same way yours did. Mines the deep cherry and was considering doing just as you did but was concerned the finish might not have been gloss underneath. Thank you for answering that question and I like it, especially on the silver. If you ever do apply any replacement please post so we can see the difficulty in doing that. Thank you again, love your rims/tire combo!
My truck is brand new and bird poop appears to have etched a stain in this part of my car. Can't get it off to save my life. This video is awesome as there is nothing else that explains this if you want to remove it completely and replace it. I may do that!
Watched this last night at work and removed mine today after waking up, much better look. I had notice how the edges in some areas was cracking and peeling up and had contemplated getting the stainless covers but ultimately I'm glad I went this route. Great video keep them coming.
Thanks William glad you found this helpful and cleaned up that old vinyl! Plenty more videos on the way sir! 👍
Had same problem on my 2012. Just found this video, gonna tackle it this weekend. Best vids on youtube. Please keep up the good work.
Thanks for the support Carlos! Let us know how you like it when you finish! 😎
I know this video is 3 years old but it's just what I needed. I already ordered my glasses pillar posts. Mine were matte and sun damaged. Hoping this makes it look nicer 🙏
Wondered what mine would look like since I bought mine brand new in 2010. Most definitely taking it off! 👍👍
I think you'll like the look Paul! Let us know when you remove it! 👍
Saw this video and had to try it. The vinyl on mine was peeling as well. They came off pretty easily. I learned quickly that the more heat you apply, the less glue residue will be left on the pillars. Great tip on pulling that screw out, I would've missed that. I think my truck looks better without it. Thanks for the video!
I completely de badged my 3500, got the front windows tinted...looks fabulous....now, the vinyl....is was looking to replace it..........the removal of it looks way better, and mine is messy.....thanks....
Looks so much better with the vinyl removed, the silver really pops against the dark windows! I'll be doing this to mine soon!
My 13 is maximum metallic and i see slight wear. Glad i found you looks more professional without it on.
Thanks for the support on the channel brother! Plenty more videos on the way! 🤘
Man! I bet yours is not the only one without anymore!! MIne will be off by tomorrow. Thanks a lot
Let us know how you like it and be sure to check out the other videos for our trucks on this channel! 👍
Ditto👍👍
Thanks for posting this. Mine is wrinkling and cracking. Was glad to see the factory paint is underneath and that it can be removed. Awesome.
Finally, ram mods videos that are professionally done. I also appreciate keeping cost in mind. I'm retired and love my 2015 ram, so I'm always looking for things to trick out my truck. I also have an eleven year old great nephew who is my partner in crime who loves to "soup up", Sam the Ram. Keep up the good work!
Thanks for the support Kenneth! I'm doing my best to keep good content coming and mods that anyone can tackle at home. Also with the heavy modifications coming with the supercharger its going to be fun to document the progression of the truck with everyone. That way everyone can decide how much they want to tinker and what is worth the money and not 😁
Looks pretty badass without it actually..thanks for the upload bud👍
Thanks brother appreciate the feedback! I kind of dig it for now. If I get bored we'll wrap it with something nicer! 👍
Came across your video, looking to address the same fading, tearing problem on my truck. Problem solved. Thanks very much. I agree with you. I like the look.
So glad I found this video lol. Previous owner of my 2016 Rebel got F'n white paint fingerprints all over everything, and the only exterior part of the truck with the prints is this vinyl. Definitely removing mine as soon as I get home today, truck is black anyway so not worried about looks
I like it with the pillar removal....makes your truck different from the crowd.
Nice video. My 2013 Chevy Sonic has B Pillars with that same vinyl covering from the factory and it's got that wrinkle thing going on with it like your truck had. Luckily my car is already a dark gunmetal color so it could only look better by removing the factory vinyl. Also, I've learned from using a heat gun on other things that if you wear a cloth style glove on the hand that is exposed to the heat it helps keep your hand from getting burned if you're working on a specific spot for a long time.
Thanks for the response! It's weird all the manufactures are all putting this vinyl that can't stand the elements! Good to know you can take it off on your vehicle too! 👍
I have a Charcoal Metallic Ram and the pillars are the same color of the entire truck. I personally like it very much. To remove the glue, you can use GOOF OFF, it will not screw up your paint and take the glue rig off the surface.
Looks great! My Ram is black, with dark tint. It should really look nice if I remove mine. Thank you for the idea!👍🏾
Looks so much better!! Looks like it came off fairly easy with the heat gun. Get to buy a heat gun!!
Did this two evenings ago and wonder why I didn't do it sooner. Looks great! Thanks
John, my 2015 Tradesman didn't have it, but my 2017 Laramie does. Both trucks are Maximum Steel Metallic so, it isn't really noticeable. For now, I'll leave it on the 2017. But Thank You for posting this because now I know how to remove it if I decide to later.
I have the same truck, same vinyl that has the same wrinkle and was wondering what to do. I think this looks great, not to mention with the texture on the vinyl when it gets dirty or wax on it it's a pain in the ass to remove. Keep these video coming.
Thanks Don appreciate the feedback! Yeah I agree the textured vinyl is pretty lame. If anything it should be a nicer material but I'm going to leave this look for a little while at least! Thanks again for your support on the channel and plenty more videos on the way! 👍
Mine is peeling off some too similar to yours, glad I ran across this video!
Nice!!! Let us know how you like it once you get it done! 😎
Great video! Mine is peeling and looks like crap. Now that you taught me how to remove it, I am taking it off this weekend. Thank you!
Thank Chad! Let us know how you like it when you finish! 👍
BoostedMotorsports ... Couldn't wait to the weekend. went to harbor freight and picked up a $15 heat gun. Just finished one side, cleaned with Goo B Gone and looks great! Doing other side shortly. Thanks again for the awesome tutorial!
I didn’t need a heat gun I just used my wife’s hair dryer and that worked perfectly
I also used Rkashs wife's hair dryer and I can confirm it worked perfectly
Just noticed my 2016 1500 vinyl peeling and going to do same. Thanks for the video!
Thanks brother! Let me know what you think of the other RAM vids on the channel when you get a chance also!
Great video:
I did mine awhile back I put mine back on I think it looks better on. Rock what ever you like.
Thanks brother! I'm with you on that and might wrap it with something nicer down the road. I just hated that crappy matte look!
Would have never even thought of this. Definitely have noticed the wrinkles though. Very informative video. Thanks man.
Thanks Phillip appreciate the feedback! Plenty more content on the way brother! 🤙
I did not realize that was a wrap! Mines coming off today on my white sport.
This definitely looks great! But I'm so indecisive cause I think the black looks good too. I suppose the good thing is that you can reapply the vinyl if you decide you'd rather have it back. I may do this. I'm also going to add the vinyl graphic to the hood and the tailgate because I like the sporty look and I think it looks good on the sport hood.
Nice! Yeah I've debated the hood graphics for awhile too but going to get some of these other mods out of the way first before I decide! 😁
I actually think it looks better without the vynil. It's a headache trying keep vynil wrapped around these edges and creases. Good job!
Thanks Saul! I agree looks better than that cheap wrinkled vinyl at least! Maybe we'll do something different with it later but for now I think it looks better! 👍
I'm just doing this on my dark grey 2009 and it's really stuck on there. The longer it's on there the more stuck. Got one side done. Lots of heat gun, plastic scraper, goo gone and microfiber cloth. Thanks for your video.
Looks better with the tape removed. I will be doing mine for the weekend. Thanks for sharing!
Just did this to my Ram and I really like the way it looks.
I agree Shawn! Looks much better than that cheap matte vinyl they come with! If anything I may switch it up with some nicer vinyl later but the color matched paint looks better than that wrinkled and peeling crap! Thanks again for your feedback and support on the channel, I appreciate it! 👍
2016 Ram 2500 owner, mine are nasty as hell, I'm definitely pulling them off, thanks buddy.
I have the silver as well and I will be doing this asap! Thanks for sharing !
Thats awesome let us know how you like it! 👍
I like it better without and it's different and the best part is that it doesn't cost anything.
Sweet. Now I know how to take it off. I have a 16 ram and it's coming up at the bottom too. Should look good on mine. It's blue. Thanks again.
Thanks Allen! I would definitely let that blue paint shine too! That's an awesome color on these trucks! 👍
Removed mine today! Love the new look with out it!
Thats awesome!! Be sure to check out the other RAM mod videos on the channel and let us know what you think! 🤙
I like it without. Mine is peeling on the same door as yours. I'm gonna take mine off as well. Thanks for this video!
I think it looks much better without it. I just got the same color Ram and I am definitely going to do this.
Hell yeah! Let us know how you like it! 😎
Thank God! You just made my day. Thanks for uploading. Never had a vehicle with the vinyl like this and it's soo faded. I didn't realize it was this easy. TY :D
I like it without the vinyl. Great job and thanks!
so I have the same situation on my 2015 Chevy Spark. Think I will give this a try.
I like it with it on.I have the same silver crew cab..now I know what it looks like without...keep up the good vids.
Thanks brother appreciate it! More videos on the way! 👍
Silver truck color look HOT! Love it!
Looks great with the vinyl gone. My 2009 driver door is damaged. Will do it.
Thanks! Yeah you'll like the look once you remove the damaged vinyl! 👌👍
Worked badass and looks amazing. Mine was super faded and I was ready for that shit to be off. Thanks
I was trying to take the weather strips off my Chevy Malibu 08 LS before I paint it but the closest video I saw to take the weather strips off was from a Malibu 2015 I got one off completely and the metal trim with it buy was gonna take all of them off because I took all my doors off before I paint it and the inside panels. What I should of did before taking the electrical system off my doors and taking the door out I should of rolled the windows down I have a cover over the vehicle now in backyard though. I took off the front grille, rear bumper, outside sideview mirrors, door knobs inside panels, doors, hood and trunk. I did all that a month ago just waiting for my parents to get the garage sale done before I bring it in garage and paint it. I would want to get a paint booth in future and a bigger air compressor but was in the process of looking to move rather in a house though. But when I do move I wanna be doing what God wants me to do for a job. Am in 40's and I don't want to keep working for someone else I wanna do what God wants me to do. I still like auto painting and detailing started liking both more in the last 2 years even though I never got a real good paint job yet actually got too much orange peel I see me doing better now. Plus I looked at a lot of TH-cam videos on auto painting and detailing videos too. Plus I have a lot of products now to use but I still wanna work for myself. I have had a lot of jobs in my life but the way I think now I should of thought like this when was in 20's. But I wasn't into painting then was more into videogames which now that ain't into nomore.
Looks great without the wrap on your silver ram! I had the same thing happen on my dark blue 13 ram and removed it but ended up not looking good with no wrap so went back and plasti dipped it!
Thanks brother appreciate it! Yeah I think it looks good both ways but just wanted to switch things up! 🤙
Didn't realize that was vinyl thought it was paint. Mine has quite a few chips. Glad it's easy to remove
Hell yeah Nicholos take that $h*t off your truck!!! 🤣
Its suprising that nissan is very similar in exterior trim anchors and the vynle bullshit . I bought carbon caps they fit quite nicely and look legit as far a carbon
Looking good, I did mine on my Ram🏁
Nice looking truck! I'm taking mine off as well. Mine is blue so i hope it looks good!
Thanks Derrick! Let us know how you like it! 👍
Looks alooooooooot better! That faded vinyl looked cheap. Good work, brother!
Thanks Bryan!! Can't wait to post up the new HID and LED setup I have for the headlights and fogs its an insane improvement! Should posted over the next few days but would love to get your feedback on those and the other videos too! Thanks again for the support! 🤙
Can't wait for you to post that up! Still need to do that for my RAM! Thanks for making the videos, brother!
I own a 2014 silver as well with tinted window. I took mine off i like the way it looks.
Nice Steve!!! Let me know what you think of the other RAM upgrade videos on this channel too! 👍😎
Love all of your videos. Quickly becoming a huge fan.
Thanks Enrico I appreciate it!!! Plenty more videos on the way 👍
That looks a lot better. I have a 2011 ram. The same thing is happening to mine. Its funny i have the wrinkle at the bottom and its chipping damn near in the exact same spot. Preciate the video man 👊
Damn that is pretty weird yours is doing the exact same thing! Thanks again for your support brother appreciate it! More videos on the way! 🤘
This is the video i got the idea from big dawg.
That looks great, my 09’s is fading it’s hardly even black anymore
Take that crap off! 🤙😎
BoostedMotorsports oh it’s going 👍🏼
Thanks for this video! My b pillars have been looking like CRAAAAAAAAAP for a few years now....your video gave me the push to do it today and the truck looks great again! Took me about an hour, taking my time and using goof off for removing the glue. Mine is a 2012 so they are old stickers....LOL
dude...thx for the upload..mine is a 2019 silver also...and the vinyl already deformed....prolly will go your route also. They look good. Cheers!!!
Right on!
@@BoostedMotorsports hey...what are the window tint percentages on yours? 15% back, 35% front????
Did you do your 2019? I want too but I've heard the 19 and above have clips vs full painted pillar.
@@baxster74 i havent... too lazy.. lol
It looks even better
I like it, been thinking about doing same but didn't really know what it would look like. I have also silver ram, mine has more chrome and I don't like much the black line the window seal line across the frame that you have now so maybe I will look for window seal chrome cover before removing my vinyl. Thanks Man, keep it coming.
I'm taking the rest of mine off as soon as we get a warm day. I took it off the drivers door without a heat gun, and it was extremely difficult to remove. Came off in little pieces. Used Goof off to get all the glue off. Now I have a heat gun. The rest hopefully will be a lot easier. Looks much better without!
Yeah that stuff is on there pretty damn good! Heat gun is definitely a must! Thanks again for your feedback Kurt appreciate it! More videos on the way! 🤘
that's a little bit of a warehouse. i like the look of the truck it's looking good. for sure looks unique with the vinyl gone keep up the videos!
Thanks brother appreciate the support! Plenty more videos on the way! 👍
awesome. once i pay down my 200 a bit more i'll be able to afford a truck shooting for basically the exact same truck as you got. lovin it man
Hell yeah man I'm sure you'll get it soon enough! 🤘
I think it looks Awesome as well!!! I have a Red 1500 & I’ll be doing the same!!!
Hell yeah! Let us know how you like it Josh!
I was literally thinking about taking that off myself today on my 2018 brand new Ram 1500, mine is a Delmonico Red pearl color so it looks even nicer. But I will replace it with a glossy one instead fully getting rid of it.
Try it out brother! Rock it with no vinyl for a week and see if you like how it looks. Then add the black vinyl if you prefer! Thanks for the feedback! 🤙
awesome...you answered all my questions about this issue...thank you
Awesome! Let us know how you like it Jeff!
Great video as always. I've made a few mods on my RAM because of your videos. Keep the good work coming!
Thanks brother appreciate that! Keeps me motivated to keep making videos for sure! Plenty more on the way and can't wait to show you guys my HID vs LED comparison video for the fog lights and low beams on our trucks, I way shocked at the results! Those videos should be out this week too! 👍
I keep thinking about doing that to my 2022 Maverick.
My friend has the same problem. Keep the grey, looks way better!
Thanks brother appreciate it! I like it for now. I usually always switch things up but that wrinkled vinyl had to go! lol 🤣
I Like it, i'm going to do mine, drivers side is like yours and it is the second one, dealer replaced it for me under warranty
They are really cheap you would think that Chrysler would put something better there.
Yeah just pull it off and put a better vinyl or expose the painted surface 😎
Looks better without but would be interesting to see it with the CF vinyl you have shown in the video
Thanks brother! Probably will get around to trying that vinyl at some point too! I like how clean it looks currently 🤙
Looks better with it
Ok need to do that to mine, it has that wrinkle to I think it looks better with it off.
I have a 15 ram sport same color may have to try this
Thank you for your explanation of all the videos for the maintenance of Dodge Ram, which helps me a lot.. I have a question, can I replace this piece of ruble with another of chrome, and if you can help me to get the part number
Thank you for the hairdryer tip.
Rain guards would look really good.
Thanks John! I had those on my old truck! I'm trying some different parts on this truck this time around! 😁
Nice, gonna do that to my Rebel!
Absolutely looks better 😎
I will definitely be removing the film on my doors. My truck color is a dark Midnight Black, but I believe this will blend much better.
Agreed! Even with your truck the gloss paint would look wayyyy better than that crusty matte black vinyl! 👍
It's funny I've seen a lot of talk lately about removing that vinyl and I have to say I've never even noticed other Ram's had it. My 2013 is black so I guess they don't put it on black trucks.
Yeah yours should be all color matched and look great already! 🤣
Mine is a blacked out 2014 and I have it on mine! Good to know that's it's same color underneath so if I ever have to take it off!
Damn Gerald I guess I was wrong! I would definitely take yours off! It would look way better having nice glossy black between the windows than that matte vinyl!
Watched this video and removed off my car,the first pillar I was too keen to get the cover off quick and left a lot of glue which took a while to get off..the second pillar I took my time with the heat gun and peeling it,had a tiny bit of glue but not much.
I like that way more than the black vinyl .just a different look to roll with.
I agree brother! I'll rock this for a bit until I get bored lol! 🤣
My white 14 has the strip that will be removed but my black 17 doesn't. Not sure if I'm going to like the odd angles between the front and rear door glass. May be the reason for the trim pieces. Great vid.
Thanks Noell! I like the look for now. Worst case scenario you could always re-wrap it with better looking vinyl if you didn't like the look. I think that factory matte is pretty cheezy. Appreciate the feedback and support on the video though sir! 👍