It’s a beautiful piece of geometry. Have to admit, if I were building it, I’d think for 5 minutes and just conclude: “looks like this gate is gonna have to open outwards”.
I would just have used the traditional method without searching for a new one: If you place the lower hinge on an extension away from the edge of the gate, it swings open upwards. But this one looks way cooler ;)
@@prajeeshperalassery6248 I don’t see how can one enter underneath the gate, since once it is closed, the lower flipping part folds against the left column of the gate.
@@cesarclausi3285 good on you mate, helping a brother out. also @MGszaman Vlog well done on asking first, that's something you don't see everyday. Nice work btw Cesar 10/10
Espectacular solución...felicitaciones...la parte de abajo tiene algún mecanismo para.tomar la.forma?? O es solo por gravedad al momento de abrir que vuelve a la forma original???
Es solo por gravedad, por eso hay que tener en cuenta la posición de las bisagras y el eje de la rueda, sobre todo para que el motor no trabaje forzado.
no sé cómo llegué aquí pero me encantó esa solución.
Gracias por tu comentario
Igual yo ajaja
x3 está genial la idea
Como evitar el espacio por debajo de la puerta
X70 que le dimos like xd
Por vídeos como este, vale la pena visitar youtube
Muchas gracias, por tu comentario vale la pena invertir mi tiempo en mostrar mis trabajos.
It’s a beautiful piece of geometry. Have to admit, if I were building it, I’d think for 5 minutes and just conclude: “looks like this gate is gonna have to open outwards”.
Thank you for your comment
I would just have used the traditional method without searching for a new one: If you place the lower hinge on an extension away from the edge of the gate, it swings open upwards. But this one looks way cooler ;)
@@HenryLoenwind I'm going to make another model that has never been seen
Que clase de placer es ver trabajos así
Muchas gracias
Es una genialidad. Excelente diseño. Felicitaciones Sr. Cesar
Gracias por sus palabras
Me alegra que haya gente que piensa todavía. Muy bueno.
Gracias
Simplemente impresionante, enhorabuena de verdad.
Muchas gracias
@@cesarclausi3285 mmmm🤔 , Subí otro video para ver su velocidad
Increíble una auténtica maravilla nunca he visto algo así saludos
Muchas gracias.
Una solución muy ingeniosa. Felicidades
Genial! Enhorabuena, ya quisieran muchos ingenieros poder llegar a tan buenas soluciones. Saludos.
Muchas gracias por tus palabras.
Me han entrado ganas de piyarme una casa con el acceso en rampa solo para poder instalarme esta puerta, muy ingenioso
🤣🤣🤣muy buen comentario, gracias
Está excelente. Te felicito. Gracias por mostrar tus ideas.
You can also install uphill hinges that tilts the gate for the incline. Pivot on the arm of the operator.
La genialità sta nella semplicità del risultato oltre che nel meccanismo. Considerazione pronunciata da un collega, diciamo cosi. Bello.
Grazie mille, è meraviglioso sentire quelle parole
Zarpado en creativo, felicitaciones!
Wow! grande ideia, saludos desde Curitiba, Brasil 🇧🇷
Obrigado, espero que os seguintes sejam do seu agrado
Espectacular!
Gostei muito belo trabalho parabéns!
Espectacular... Gracias por compartir!!!! No se me hubiera ocurrido!!!!
Muchas gracias
puro ingenio
Gracias, a ver si le gusta lo que viene.
Muy bien hecha👍...pero si te bienen siguiendo abrela desde 2 bloques antes que llegues
Gracias
Es Ud un genio con buen gusto felicidades
Muchas gracias por su comentario
Me gusto mucho ese portón yo soy de Papantla veracruz
Muchas gracias por tu comentario, espero hacer más proyectos diferentes a lo que estamos acostumbrados a ver.
Un saludo
Muchas gracias por compartir.
Espectacular César !!! Muy bueno 👍🏻👍🏻👍🏻👍🏻
Muchas gracias
That would be about the best swing gate on a sloping driveway that I have seen.
Parabéns pela genialidade e por compartilhar.
Obrigado pelo seu comentário
Simplesmente genial, demora um pouquinho para abrir e fechar, contudo é uma solução incrível.
muy buena idea. Te felicito!
Muchas gracias
What a great idea!
Thanks
YES ! Brilliant
Great idea but not safe.anybody can enter, , under the gate
@@prajeeshperalassery6248 I don’t see how can one enter underneath the gate, since once it is closed, the lower flipping part folds against the left column of the gate.
@@prajeeshperalassery6248 It is impossible, it remains locked in the closed position
It’s really cool, the way the angled top brace is a mirror of the bottom hinge! When closed it’s almost impossible to see the unique ‘feature’!
Thank you for your comment, the truth is that I was thinking about your design for five days without being able to think of anything else
Que buena idea
Gracias por compartir
Gracias a usted
Todo un genio!!! Gracias por el vídeo
Gracias por sus palabras.
Maravilla de trabajo
Gracias
simple and elegant.
Thank you so much
elegant but not simple design...
@@comscom its certainly not complicated .. basic farm yard engineering ... hues it depends on what your used to really though
OMG, never thought of this and makes a World of differents. Thank U so much for sharing
Thanks for your comment
Excelente , muy ingenioso .
Gracias
Genial. Felicitaciones...
Muchas gracias
muy buena idea , excelente solucion ,
Gracias, espero que te gusten los proximos videos.
Muito bom! Parabéns pela eficácia !
Obrigado
Excelente idea.
Muchas gracias
good idea, sencilla, pero mas de uno no sabria darle solucion.. good.
Para mí lo mas complicado es dar soluciones simples, sin complicaciones, gracias
Preciosa, yo pintaria la parte inferior donde esta la rueda de color roja y blanca. Para evitar que los coches la golpeen
Tienes razón, buena idea, pero como es para un particular es facil que se acostumbre a entrar
Parabéns , excelente .
Gracias
Muy buen trabajo 👌
Gracias
Se lo voy a enseñar a mi serrajero para que aprenda
Si necesita ayuda solo tiene que pedirla, gracias
Herrero no serrajero😏
Es genial, felicitaciones👏🏻👏🏻. No sé de donde es.
Esta en Carcaixent-Valencia-España
Such a great idea! Bravo 👍
Thank you, I hope the next ones are to your liking
una solucion ingeniosa...
Muchas gracias👍
Excelente!! Muy buen diseño!
Muchas gracias
Exente, solución 👍👍
Gracias
El algoritmo nos trae a ver esta maravilla de idea
Muchas gracias
Trabajazo, pero sería más factible y barato poner una enrollable.
Pero trabajazo sin lugar a dudas.
Wao tuvo que ser un geenio quien lo pensó...
Sobre todo porque lo jalas cuando esté cerrada y así pasas por debajo.
Davinci...
There are very clever people out there, well done 10/10.
Nice idea.
Obrigado
Excelente trabajo.
Gracias, espero que te guste lo que voy a poner a final de mes.
Thats a cool gate !!
Thank you, I hope the next ones are to your liking
Muito engenhoso 👌, mas a demora para abrir já dá pra ser assaltado 2 vezes antes do portão terminar a abertura .
Jajajaj
te quedo fregon carnal.
Hi can super idea . Can I use Your video to my compilation of best gates ideas on my channel ?
Hello, you can use the link without any problem, I am here to help as much as I can
@@cesarclausi3285 good on you mate, helping a brother out. also @MGszaman Vlog well done on asking first, that's something you don't see everyday. Nice work btw Cesar 10/10
The simple ways are alway the best👍🇬🇧
Thank you, I hope the next ones are to your liking
Genial te la craneastes
La verdad es que bastante para equilibrar el cierre y los puntos de rodadura, gracias
Muy bueno espetacular
Me alegro que te guste, gracias
Great idea
Gracias
Si? Está muy bien está reja, 👏👏👏
Gracias, espero que te guste o proximo
Super ingenioso.
Muchas gracias
Brutal, es precioso de ver. Pero todo el peso de la puerta va al brazo. no?
te van a fichar en boston dynamics
La verdad es que ya tengo 50 años y nadie me da trabajo.
@@cesarclausi3285 En ese caso te deseo lo mejor. No te desanimes, algo saldrá amigo. Saludos!
Wow😲🤩🤩🤩😍😍 NIC work 👍👍👏👏👏👏👏👏👏
Absolutely Ingenious, wow !
Great idea and design!👍
Muy buen diseño 👍🏻
Gracias
En donde los hacen o como se llama la empresa
Cool idea ,,, awesome 👏👏👏
Yo te dije como aser le cesar neta eres muy bueno en lo que ases voy aser una igual y te envio el video tambien trabajo asiendo eso
Si te puedo ayudar en algo, ys me lo dices.
Brilliant work fantastic matter.
Thank you very much for your comment, I hope you like the next ones.
Good idea👍
Thank you, I hope the following are to your liking
Wow it help to my house. 👍
Espectacular solución...felicitaciones...la parte de abajo tiene algún mecanismo para.tomar la.forma?? O es solo por gravedad al momento de abrir que vuelve a la forma original???
Es solo por gravedad, por eso hay que tener en cuenta la posición de las bisagras y el eje de la rueda, sobre todo para que el motor no trabaje forzado.
Gracias
Muito bom 👏👏👏👏👏👏👏👏😊
Complete respect to this genius scientist
Thank you very much, few know what it costs to do something that nobody believes will work
Спасибо, гугл. Как я раньше жил без этого ролика с воротами.
ahuevo
😂😂😂
было бы легче не иметь двери
Genial.
Gracias
That's super clever
Thank you
Why the fuck recommend me this. Hahahah still great to watch, things goes smoothly.
GENIAL!!!!
Genialne 😃😃
Thank you
Muito bonito. Só achei que o motor ficou lento demais.
Grazie per il tuo messaggio
Muuuubuena
Gracias
Very Good
Interesting idea, how is longevity on that top hinge? Because it seems like there would be a lot more force on it with this design.
So creative
That is very ingenious.
Excelente!!
Well done
Merece 👍👍👍👍
Hola donde estais cuanto puede costar una puerta como esta?
Hola, estoy en Valencia, el coste depende de la forma y dimensiones
@@cesarclausi3285 gracias
Brilliant design...
Tengo el mismo problema y esa solución me vendría genial. Como podría realizarla? Hablar con algún herrero?Gracias
Awesome so you just lift the bottom up to break in?
My first thought also, I am hoping it closes against the bar so you cannot do that.
There is no way to lift it. It’s up against the post.