Making Hybrid Stump Grinder
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2023
- Tree trunks can be very annoying and difficult to dig out, which is why we made a tree stump destroyer.
When we started the project, the weather was nice, but it took a long time to complete and we didn't make it before the snowfall, so we only did one test. In spring, we will try to record a separate video where we will test the machine more thoroughly and on larger trunks.
The axle comes from a small children's ATV, the wheels and rims also come from an ATV, but a little bigger. The electric motor is from a wheelchair.
The shield has a diameter of 360 mm.
Gasoline engine 15 HP.
You may also like these videos:
• Making revers trike to... - Revers Trike Full Build
• Making 14 Hp Brush Mow... - Making 14 Hp Brush Mower - using Lawn Mower parts
• How to Make Firewood C... - How to Make Firewood Cutting Machine DIY
![[TH] 2024 PMSL SEA W1D4 | Summer | ละเอียดทุกเม็ด เพื่อเข้าไปเก็บคะแนน](http://i.ytimg.com/vi/W6i3u5r1Vbw/mqdefault.jpg)
Without a doubt, Polish machine building channels are the best on TH-cam!
If you see what Ukrainian engineers come up with and what these Polish guys are doing. Russia has to think hard.
Hahaha that's a good joke, best I've heard today
@@jamesadams893 No joke.
@@jlucasound I'm laughing so yea it's a joke
@@RogierYou😂😂😂😂😂
Masz Pan rękę, oko i serce do želastwa. Nie żyjeś na próżno, pozdrawiam!
I remember the first video I watched on this channel where you built wood burning stove for your workshop.
Things have come a long way since then.
He builds nearly everything, from the workshop to machines, all well made!
I Love that Pneumatic Shop Vice.
@@jlucasound uses it all the time, a great project!
Beautiful job. Your skills and planning are top notch.
Beautiful job. One suggestion... You might add a structural bracket to your L section and the Square Stock. I believe the weld on the L section where the cutting wheel is may eventually give you some design trouble due to vibration while cutting. I do not believe it would have to be significantly robust, but enough to give you some insurance to prevent a failure on that 90 degree corner directly behind the cutter.
Another great project your fabrication skills are off the chart along with your video editing. Thank you for sharing your projects with us.
Not even through this video and I just want to tell you that you are so talented. Love your work.
All the way from the USA !!!
Thank you, sir. So far I have enjoyed everything I have seen you build. It is a joy to see someone take pride in their work and do such a good job. Brings me much enjoyment. Keep up the good job.
Thanx 😉
You should sell the plans for your design or put this in to production, because this thing is incredible very well thought out and well built! The ingenuity you put into this thing is incredible. Well-done sir, I would buy one in a heartbeat!👍🏼🤩🫡❤️
No uwielbiam te Twoje projekty. Zajebista sprawa takie coś . Czekam na następny film
Fantastic project! I like the design, and the two independent motor system, makes perfect sense! Top notch pro craftmanship as always, thanks for sharing!!!
Got attacked by the stump in summer, dealt with him in winter. That's a cold-blood vengeance! )
The blue print on a PDF and I should be a buyer of this to build it at home! Respect to the man and the unbelievable craftsmanship!
Despite winter approaching, you managed to produce the machine, which is unbelievable even for your great skills...I would vote you as president 4 sure 😅
Bardzo lubię oglądać Pańskie filmy, cieszą oko. Jest głowa na karku😀 pozdrawiam
Maszyna zagłady elegancka 😀.
Nie jednemu by się takie coś przydało .
Pozdrawiam.
That is impressive and terrifying, at the same time. What a great build!
You can make a handheld version that works very well for chipping away small stumps-even into the ground, also removing brush in overgrown areas as well as edging overgrown pavement. You convert a handheld "edger" like a Redmax brand (they usually have a 1:3 gear ratio head-32cc engine is good)
You then fashion a metal gaurd and a custom mount for a carbide tooth table saw blade. It works fantastic for many property cleanup purposes.
I used one professionally for just those purposes for 10 years and only went through a few blades-they are exceedingly durable
Very nicely made. I think you could build these to sell this machine commercially. though and a few things you could do to lower thefinalprice. That is an excellent piece of work. Thank you for sharing, Bob from Virginia USA.
Pierwszy raz widzę frezarkę do pni i kruszarkę do betonu w jednym😉 Wspaniała produkcja, piekny umysł. Wszystkiego dobrego!
Incredible work, as always!
What a great project!
So enjoyable and informative to see projects from you. Thank you very much.
Your Stump Grinder Works Great, Nice Build.
jak zwykle super pomysl i wykonanie, zdrowych i spokojnych swiat zycze
Wzajemnie!
That was quiet a number of assemblies to skillfully build.
Nicely done. 👍
Thanks 👍
Dude you are awesome at anything!! God has blessed you in so many ways!!!! Love your videos
Świetna robota, wszystko jasne i inteligentne, a co najważniejsze dobry pomysł z piastami samochodowymi.
Impressive farbicating man! That was really fun to watch.
What a beast of a machine! Nice work my friend 👍
Gday, that was an awesome build, the snow has definitely settled there now mate, cheers
Pełen profesjonalizm jak zawsze , też robię w ślusarstwie ale Ty jesteś maga gość
Wonderful job..., well done dear brother. God bless you so much
He trip on it during summer, and cut it down in winter. A properly cold revenge.
You certainly are a wizz at making machinery. Happy christmas to you and your family.
Tu es vraiment ingénieux. Travail magnifique. De Saint-Jérome au Québec
You are a legend! Thanks for the build!
Yet another great tool you made!
👍💪✌
Excellent video man and what an awesome machine. That eats those stumps like a kid eats candy. Great job 👏
Extra machina zbudowana jak czołg,masywna. Na wieki. Ale wydaje mi się że jeden pasek do napędu ostrzy to chyba mało, ale ogólnie extra temat. Pozdrawiam 😜😜😜😜
Wystarcza w 100%. Sprawdzone i przetestowane. Prędzej silnik się zadusi, a pasek nie ślizgnie ;)
another awesome build! Good job brother!
Чтобы инструмент в зб не крутило и не прибить окончательно зб , купи конусную развертку и от руки откалибруй посадку, а также есть шансы в пиноли устанвить штифты под лапку тогда вообще отлично будет
Another awesome project !work very well!!salutation from Montreal,Québec!👍👍👍💪
Hi there Good job have good day and happy day be safe
Happy new year to all. See you next time.
I keep thinking about building one. This one is very nice!
Podziwiam poziom wiedzy i wielki talent oraz doskonałe unarzędziowienie prac. To klucz do dobrych projektów. A może zastosować kompletmy układ napędowy z mobility scooter . These are great and versatile. By the way are You both doing these magnificent projects at home in Poland or in the US . I`m pround of You guys and would like to support Your works.
You are Talent!!! Greetings from Finland! We have 40cm snow. ❄️
🎅🏻👍🏻🇫🇮🇫🇮🇫🇮🔩🔧❄️❄️❄️
Hello mister very well done beautifully built i like watching your video thank you
Этот парень настоящий гений. Смотрю его лет 4-5, удивляет каждый раз.
Молодец!
Well done! Get a smaller pulley and get those rpm’s a little higher. Well done!
Wow what great craftsmanship 😮
Да, очень брутальная машинка получилась. Такой и бетон можно пилить. Кстати, сломанное сверло можно же заточить.. а еще заметил футболку от Колина :)
Great job😉
Tree stumps in Poland are *no longer safe* if they're anywhere near Derek. 😁 Your builds never disappoint and are always worthy of a 👍 God bless. Btw; I've watched many videos like this and always wondered if it's possible to mount a skidsteer drive motor onto a frame to power a modified forestry mulcher head [drum]. One reduced in width to approx 10-16in and converted to either belt, chain or shaft drive. Because of its weight use the track drive from a snow blower. Sketchy idea yes; but.... ;)
Молодцы, качественная работа! 👍
Только остались сомнения - измельчитель не прыгнет, если закусит ротор?
Zawsze jestem pod wrażeniem tego, co zestawiłaś.
tak trzymaj. (Google Translation German to Polen) 😊
Светлая голова и золотые руки !!! 👍👍👍
Clearly inspired by CyberTruck :) Great work as always!
Like all your creations.....ingenious and works!
You should do an episode on building your own waste oil burner
Ciekawy sprzęt. Dobra robota 😎
Nice work 🎉
37:00 That's wild that that disc is spinning so fast it looks like it's turning backwards. Scary powerful.
Молодец, классная работа! С нетерпением жду новые проекты!
Nice project as usual. Looks like you might want to turn your attention to a snowblower next. 👍🏻
Ejjjj yoooo, wyświetlił mi się ten filmik na głównej spodobał mi się i chciałem sprawdzić co tam innego jest na kanale i okazało się że masz ponad 1 milion subow a twoje filmy wykręcają wspaniałe wyniki. Gratulacje, robisz zajebista robotę. Szkoda że dopiero teraz odkryłem twój kanał
So nice to hear your voice, and your English is very good!
Thank you! 😃
Nice job this is what ey need too clean the garden from the old trees
Great work sir hat's off your ideas are awesome good job 👏 👍 👌 ❤😊
excellent work, man !!!
Watching you bend the metal has me wondering why you haven't made a press break. Still, i love watching you fabricate and hope that one day i'll have half your skills.
Love the Colin furze T-shirt . Pozdro
stary, pokaż mi miejsce, gdzie był kikut, jestem z Rosji i zawsze oglądam twoje treści, bomba!
I would most definitely buy plans for the waste oil burner
Taka mała sugestia, wydaje mi się że napinacz paska powinien być od góry zamontowany, zdecydowanie przedłuży to żywotność paska jak i samego napinacza. Ale to tylko moje zdanie. Fajny filmik pozdrawiam 💪💪👍👍
To jest bardziej podpora paska, żeby można było wykonać większy obrót ramieniem. Napinanie paska jest na silniku 🙂
28:41 właśnie po takim rzucaniu pękają wiertła :D BTW bardzo dobra robota!
Good work!
Solidny sprzęt i na pewno nie raz się przyda, ile pracy tu włożyłeś to wiedzą ci co majsterkują? Pozdrawiam
Как всегда все отлично и без лишних слов))
The cost of steel alone would be a nightmare, even so this is a nice build (and I mean build).
I sure hope he's going to grind down more than just the one stump shown at the beginning of the video.
Best of the best!
This comment regards all your films.
I'm really proud I live in the country where people have such ideas and are able to work them out.
CONGRATULATIONS
Tak trochę o po polsku, to zazdroszczę Ci wyposażenia warsztatu 😀👍
Ponad 7 lat inwestowania i dozbrajania warsztatu, a zaczynałem dosłownie od zera 😉
po prostu potwór
a maszyna też niezła
500.000 vnđ 🇻🇳 viết. Khắc. Thêm : 139 số 0. Cr : bảng in. Money. Science. World 🇭🇲🇪🇺🇨🇦🇮🇹🇬🇧 ?
Ông ấy đang chế tạo : science. Người vận chuyển. World
Fantastic content.
Vous êtes vraiment un très bon bricoleur 👍
Very good job
Fajnie wyszło. Robotę robi. Przydało by się :).
Very nice stump killer!
That’s awesome. Doesn’t even make a mess 😳
I think this is your best build.
Dobra robota chłopaki. Jednak mocowanie koła frezującego na jednym płaskowniku do tego krućca wygląda niezbyt mocno, ja bym to wzmocnił.
Зачётный аппарат.отличная самоделка.
Fantastische Arbeit!
great project
Как всегда супер🔥🔥🔥
nice machine. What were you spraying before welding?
You should show us how you built that tractor too
Works just fine.
Jak zwykle super wykonane. A powiedz, co z tą sprężarką którą kiedyś przewoziłeś na widłach traktorkiem. To już pracuje czy będzie z tego jakiś projekt? Pozdrawiam
Just phenomenal! You are a master craftsman and your videos are both fascinating and educational. I can appreciate the “shit happens” comment. Of course it happens to me FAR more often than I care to admit.😜
Well done.
Kolejna dobra robota.Pozdrawiam. :)
Piękna robota