ฝัง
- เผยแพร่เมื่อ 2 พ.ค. 2024
- 🛒 Get the SOVOL SV06 here: geni.us/sv06
🛒 The bigger SV06 Plus: geni.us/sv06plus
3D PRINTED PARTS
🔶 5015 adapter for Sovol SV06 extruder: www.printables.com/model/4665...
🔶 The Nautilus - Sovol SV06 Fan Duct 5015 Blower Fan V4: www.printables.com/model/5427...
🔶 Nautilus remix for ticker WinSinn 5015 fan: www.printables.com/model/6387...
🔶 Sovol SV06 Strain Relief: www.printables.com/model/4526...
🔶 Sovol SV06 bed alliner: www.printables.com/model/3781...
🔶 Sovol SV06/Plus Extrusion Seal: www.printables.com/model/3853...
🔶 LCD Display Back Cover for SOVOL SV06 3d printer: www.printables.com/model/4096...
🔶 Screen Knob for Sovol SV06: www.printables.com/model/4072...
🔶 Sovol SV06 Screen Cover: www.printables.com/model/5693...
🔶 SOVOL SV06 Filament Sensor Mount: www.printables.com/model/6250...
🔶 SOVOL SV06 Plus filament sensor replacement: www.printables.com/model/5795...
🔶 Sovol SV06 Backpack: www.printables.com/model/4310...
🔶 BTT PI V1.2 case bottom remix VESA 750: www.printables.com/model/5043...
🔶 BTT PI V1.2 case: www.printables.com/model/4977...
🔶 Sovol SV06 BTT HDMI 5 Mount: www.printables.com/model/4806...
🔶 Sovol SV06 Camholder: www.printables.com/model/3955...
HARDWARE
⚙️ 5015 Blower Fan: geni.us/blower5015
⚙️ JST 1.25mm Connector Kit: geni.us/jst125
⚙️ Micro switch for DIY filament sensor: geni.us/microswitch
⚙️ Bearings for DIY filament sensor: geni.us/608bearing
⚙️ Bigtreetech BTT Pi 1.2: geni.us/bttpi12
⚙️ Sandisk 32 GB Extreme Micro SD: geni.us/sandisk32ex
⚙️ Bigtreetech HDMI 5 screen: geni.us/btthdmi5
⚙️ Logitech C920 web cam: geni.us/logic920x
Join this channel to get access to perks:
/ @crosslink3d
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for TH-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
Looking forward for the klipper and other sv06 vids from you. Well done!
Hey, thank you very much for this video and I hope you post even more great improvements about sv 06 printer. Especially about the clipper. I enjoy following your channel and it's very great. Viewers like me can really be thankful that there are people like you who can contribute so much to the community. I learned practically everything I know from your channel. All the best
amazing video!! i got an SV06 recently, and as a person completely new to 3D printing, these tips have helped a ton!! would also love a tutorial video on the BTT Klipper upgrade on the SV06!
Hello
Congratulations on the tips presented.
You saved me and My Sovol SV06. The problem was the extruder fan. The tip provided hits the target.
Thanks a lot for the help.
Hi Daniel,
kannst du bitte ein Video zu deiner Klipper Lösung machen. Wäre dir sehr dankbar!
Tip for people looking to upgrade to klipper a RPI zerow2 will run klipper just fine for much cheaper
Awesome video! I got my SV06 about 4 days ago so im keen on doing most of these upgrades! I managed to do a 24 hour print without any clogs but will definitely be upgrading the fan and ill see the difference first hand. Overall hapoy with my purchase of my first 3d printer
Same
I have the sv06 and sv06 plus and love them both. And I am running klipper as well. I went with a pad 7 on my plus and a rasberry pi 3b and a screen on the sv06. I also have the upgraded 5015 fan upgrade. I do like them both now. I also have a kobra and a k1, and my favorite is the k1, but the sv06 Plus is my second favorite. Thanks for the video. I will look at doing the heatbreak fan mod as well. I have been lucky I guess as I have not had many clogs . I also print abs a lot on my sv06 and it works well with ABS. And yes an enclosure is needed.
Thank you for talking about STRAIN RELIEF I don’t have a sovol but I know without proper strain relief you will most likely have a fire 🔥
Print the fan duct with PET-CF. It will hold up to pets temps for hundreds of hours without deformation.
thanks for the video! Before changing the fan, what temperature you were printing at when it clogged? Considering getting this printer.
I think you might have a different issue if your hot end cooling fan is causing heat creep because I've been running the stock one for nearly 6 months now and have completed multiple 40 hours asa and abs prints. Actually haven't experienced a clog at all on my sv06.
Now the cooling fan is definitely worth while but I would highly suggest printing it in abs or asa or nylon. My first 2 petg fans melted. All you need to print higher temp filaments on the sv06 that require heated enclosure is throwing the printer in a cardboard box or something similar and you'll be fine. I've been running nothing but asa the last few weeks now.
I'm working on adding a linear rail and 1515 extrusion to the x axis to get rid of the rods and switch over to xol dragon burner with tap for the tool head. Still quite a bit of work yet to do with it though.
Another nice upgrade is changing the top bar to a piece of 2020 rather than the injection molding piece. It can help quite a bit to keep the frame square and keep the z towers plumb
Where are the links for the toolbox and camera mount?
Thanks for the video! I was wondering if you could elaborate on how you connected your filament run out sensor to the Mainboard, and how you implemented it in Klipper. I purchased the exact same switches and have soldered the wire to the switch, but I'm unsure of how to connect it to the board and make klipper recognize it. thanks!
I had a clog in mine because of heat creep and cleaned it out and then cleaned the heat break and the headsink hole where the heat break inserts into and then coated the heat break with slice engineering boron nitride paste and let it cure for a day and didn’t have issues again. But it’s still good to upgrade that really small fan also…..don’t know who even though it was a good idea in the first place…..
I’ve had 2 sv06 cause the first one took a tumble off my table but I’ve never had a heating issue
Congratulations for the channel, as an owner of SV06 I signed up immediately. My SV06 printer, among other problems, also has excessive play on the right lead screw, more or less at half height. This means that when I try to print objects taller than 75/80 millimeters, the extruder hits the piece and detaches it from the bed. I had thought about solving the problem by buying the anti backlash nut but the one I received from Uncle Bezos doesn't have the same thread pitch and doesn't fit. Can anyone tell me a link where I can buy them? Or do you recommend having the lead screw replaced under warranty? Any advice to solve the problem will be appreciated, thanks.
Mainly upgrade all the fans... Grease your bearings. Level your bed with 0,1mm shims. Use cheap Chinese filament sensor. Print new z motor mounts and align them straight with tape. print a autorewind spool holder. I'm going to try z wings to improve print quality. Tip: Level your bed with the led on the inductive sensor
thanks for the video. I was looking for the tool holder. didnt see the link and i couldnt find it. if you can provide that be awesome
on the mando helmet vid 1 you posted a bearing adapter for the filament roll, did it work out and reduce strain? there is no mention or follow up on this.
that's what I am looking for!
Something else to watch out for; the case fan for the motherboard is tied to the part cooling fan (at least it was on mine, don't know if they've fixed it!) so when printing ABS the motherboard fan stopped running!!
Suggest rewiring this fan directly to the motherboard power supply input terminals.
When are you releasing the klipper video?
Omg the clogging was getting terrible !!!! Every morning was getting up with the nozzle “air printing” doing that fan upgrade this week end !!! I am over it because at the end of the day its a really nice printer with nice quality
This video couldn’t have come at a better time, I just bought my first 3d printer, an SV06 about a week ago and I’m so far down the rabbit hole on trying to optimize this machine as much as possible.
I found your channel when researching printers, so it’s super nice to see such high quality content about the SV06 since everything else is very hit or miss.
Already installed Klipper on a Pi via Bassamanator’s GH repo/guide, ordered some 5015 fans, and a 0.6mm CHT nozzle for fast prototyping, and I even ordered a filament sensor (idk why I got the sensor, im never printing when I’m not there to monitor. It’s just so fun to trick out my machine!)
Now I’ll be to be scouring hardware stores in Berlin for all of the necessary M2/3/4/5 bolts/washers for all the cool parts I find on Printables. This hobby is so addicting!
On my wish list this December is a sensor to properly setup input shaping, and long term I’m excited to build a Lack enclosure. I’m not much of a maker, I just love to squeeze all of the performance out of this thing.
Thanks for the video Daniel! I’m really interested to know how I can print faster since my print time is so limited (apartment with thin walls, and a young child in the next room). Right now I can do a high quality 50 minute benchy using the Bassamanator Klipper config and Ellis slicer profiles, but I want to push it lower as soon as I install the 5015’s.
This is like staring into the mirror, lol.
I never had issues with cooling even for 24hours+ sprint on my sovol sv06..But I am curious if these fans would lower the fan noise a bit?
theres a video teaching how to change to klipper ? what should i do about configs etc..
I have an issue with my SV06 plus having a different Z offset almost every time I print. Is there by chance an upgrade to the bed sensor? I'd like to use a klicky replacement for more accurate bed leveling.
Hey ,thank you very much for this video !
Iam consider to buy this printer (sv06 plus) iam new to this hobby , i like to do the same as you klipper firmware and btt5 hdmi screen .
Can you make a video of it , how to install klipper and klipper screen and how to connect the btt pi and btt hdmi screen ?? thankssss
nice!!
I have tried everything i cant think of i cant get klipper to let me set the z height every time it will probe_calibrate then move up a few mm while moving the nozzle over the probe point then its too high and klipper shuts down when i hit the 5mm threshold any help is greatly appreciated.
When will the klipper video come out thanks
Good job on the video! My only question is, can the upgraded printer do carbon fiber, or is that something one would need the SV06 Plus for doing?
Printing Carbon fiber really depends on the composite material if it's carbon fiber PLA or ABS or Nylon. Carbon fiber PLA could technically be printed without an enclosure, the others not. And you should replace the nozzle with a hardened steel version, otherwise, the original brazz nozzle can wear out super fast (literally, it can be unuseable after one single print, depending on the material).
I bought the sv06 last week, it's my first 3d printer and overal, I'm super excited to be getting my feet wet.
One question I do have, I just did the 5015 upgrade, what settings do you use after going for a bigger fan?
I did not change any settings as my impression was that the small fan was not powerful enough anyways
Run 100% unless you use materials like tpu or petg for example.
Great video, thanks.
I recently keep having issues with the extruder on my SV06. The small gear comes lose of the shaft and result in the extruder not pushing filament down anymore. I checked it multiple times and no matter how hard ai tighten the little grub screw, it comes loose again. Do you have any extruder updates for the SV06?
Happened to me initially but not since then. Currently I am considering to upgrade to a Voron Stealthburner mod
You had issues with clogs? I'm running on the stock heatsink fan for over a year and never had a clog. Maybe that's only an issue on certain charges of the hotend?
Just so you guys know, Sovol has released an official Klipper pad for the SV06 and the plus
I upgraded my SV06 with Klipper using the Raspberry Pi Zero 2 W. Cost me 25€. Can be an alternative.
Edit: please google bassaminator.
I tried to reply to this comment but its always get deleted
Do you have bin and confit files? I have tried to run klipper on my sv06 using a raspberry pi 3 and it keeps running into problems, only prints one print then the next print will just home the printer head and extrude continuously🥴🥴
@@colmcrotty5549the bin file is not reasoning for this. Thats ur config file issue. All the firmware does is tell the main board to do what pi asks
Do you have a guide or tutorial
I tried many times to reply to this comment. But its always get deleted for some reason
@@damzelfly ayy it worked this time
Hi, Can you share the steps for installing btt pi klipper to sovol sv06 printer ?
Yes, I am just very busy at the moment. I will eventually do that in a comprehensive video. Also for the SV06 plus.
Did you happen to post the camera mount? I didnt see it id love to use that
I have added it to the list in the video description. Good catch!
Really Appreciate that!! printed it and love it!!!!@@Crosslink3D
I have no idea if anyone will even see this. I'm pretty new to the whole 3D printing thing. Where would I go to have that Nautilus shroud printed in something like nylon?
If you're interested, I can send you a quote. Contact me at daniel@crosslink3d.de
by the way, the links for me, most of them looks crash and others its not the description.
So the out of the box Sovol can't even be connected to Printrun via USB cable?!
Why not? It runs perfectly through usb with Octoprint, so Printrun should be no problem. I went straight for Klipper however.
@@Crosslink3D Because it's not listed in the features on the official site and some reviews used sentences "as for connectivity we've only got a USB drive to print from".
How about updating this or a new video covering how the Sovol Klipper Screen (SV06 edition) fits into all of this? No additional single board computer needed…?
I've never had any clog issues. Hm.
a stock SV06 is probably one of the worst printers on the market. I had to upgrade nearly every aspect of mine to make it serviceable.
So far, I am happy with the upgrades I did. It's now a really good printer with lots of potential to tinkering more!
Could you tell me more? The community talk so sweet about it. I've been looking for a cheap replacement for my Ender 3 v1, so the SV06 was looking just fine.
use 4020s instead of 5015s