Very informative video, also where can I get the bracket that holds the fender + plate (rear tail light) onto the exhaust? I have a big gun exhaust , and there isn't a way for me to attach the fender with the exhaust
kidplayed I reused the bracket that was originally on the bike but later I mover the plate further under the bike and use a hinged license plate holder. Then Recently I upgraded the tail light to a low pro one. Plate holder rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F122714266352 Tail lights rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F123069580399
I ended up cutting the old connectors off the old blinkers and soldering it to the integrated blinkers it's a lot easier that way because you'll damage the plug trying to pop it out with a flat head. If you can't solder try crimp connectors.
so what you do with the black wires the tail light come with one wire for the left and one for the right turn signal .. how do you like the brightness of the light... i dont know how to solder wires smh...
do they flash quick, did you use one of those relays? i have the same tail light but i am debating if i should isntall it due to the quick blinking thing thank you
do they flash quick, did you use one of those relays? i have the same tail light but i am debating if i should isntall it due to the quick blinking thing thank you
Very informative video, also where can I get the bracket that holds the fender + plate (rear tail light) onto the exhaust?
I have a big gun exhaust , and there isn't a way for me to attach the fender with the exhaust
kidplayed I reused the bracket that was originally on the bike but later I mover the plate further under the bike and use a hinged license plate holder. Then Recently I upgraded the tail light to a low pro one.
Plate holder
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F122714266352
Tail lights
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F123069580399
the clearification video answered my question thanks
Alright cool
How did you disconnect the pin out of the stock left and right blink connector case
I didn't I ended up cutting the connectors off and soldering the the wires to the plug. That way I could still connected and disconnect.
What did you pop out of the grey connector? With the flat head
I ended up cutting the old connectors off the old blinkers and soldering it to the integrated blinkers it's a lot easier that way because you'll damage the plug trying to pop it out with a flat head. If you can't solder try crimp connectors.
so what you do with the black wires the tail light come with one wire for the left and one for the right turn signal .. how do you like the brightness of the light... i dont know how to solder wires smh...
I'm uploading a video right now to show what and where I connected them. I like mine its bright and works great.
do they flash quick, did you use one of those relays? i have the same tail light but i am debating if i should isntall it due to the quick blinking thing thank you
do they flash quick, did you use one of those relays? i have the same tail light but i am debating if i should isntall it due to the quick blinking thing thank you
They do now but I did install a resistor into the wiring harness to prevent it from flashing to fast. I've changed it since this video though.
funny i install mine today and it did not flash fast at all, it flashed just normal, i wonder if it's due to the little signals that were aftermarket?
one of the wires on mine is cut so the signals and breaklight wont come on now what should I do?
David R Solder the wires back together? Don’t forget shrink tape.
What brand of exhaust is that?
Jardine RT-1
th-cam.com/video/_3yKNB3v3E4/w-d-xo.html here's a link of what it sounds like.
Can I give you a call I saw that video a couple of times
th-cam.com/video/-Zv9u3jCCf0/w-d-xo.html
heres the clarification video
6:27 "DoGgAmMeT"