This was so helpful. Brad is so knowledgeable and is thorough an precise in his instructions. My son has this machine, one year old an wouldn't start. This video got us up and running. Thanks, Brad!! On a scale of 1 to 10, this was a 12!!
Living is WNY, a snowblower is a must. Mine wouldn’t start. What a phenomenal educational video. Followed your directions, took the carburetor apart, found the issue with a clogged jet, cleaned it, put it back together and it fired right up. Thank you sir, keep up the great videos.
Just got the Cub Cadet out today after 8 months and sure enough it didn’t start. Watched this video twice and did everything you said and it then started first pull! This was the best explained video I saw on the topic. Thank you so much!
I'm glad it was helpful and your back up and running. Please give this a thumbs up and share my channel to help it grow. It would be greatly appreciated!
I'm with the previous commenters. Excellent presentation for trouble shooting and minor carb cleaning. Brad supplements users manuals by lending his experiences to problems that might crop up. Saves having to load the blower onto a trailer to take to the maintenance center.
With a storm coming in three hours and a Cub Cadet that won’t start you saved me big time. Followed your instructions and she is running great. Thanks.
I’m glad it was helpful! Thank you for sharing, watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!
Thank you! I’m glad you liked it. Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
After watching your video once from start to finish I completed a full carb clean in under 30 minutes. It started first try!!! Thank you!!! @@JohnsonsSmallEngines
The level of detail, tips, and facts you give us is incredible. After watching other videos on the same subject yours is by far the best. The videography is also great as you provide clear video which is focused where the viewer would want to focus on. The lighting is great as well. Overall great instructional video which has given me the confidence to tackle this tonight as a winter storm is looming and I already have a layer of snow to remove. Your comment on the effects of leaving fuel in the machine over storage (even with stabilizer) is now prompting me to run it dry before storage going forward. I don't have access to that clean fuel you mentioned here in Canada, but I can use your other tips to counter act. Liked and Subscribed, thank you.
I'm glad this video and another was helpful. Thank you for sharing, the very kind comment and supporting the channel. It is greatly appreciated! Please share my channel to help it grow :) Take care.
I have the exact snow blower with this problem. Won't start. I followed all of your instructions. The video and explaination is right on. Cleaned the carb, put it back on the blower and it started on the first try. Thank you so much. Saved me from having to haul it to a shop and back. Would have probably had to wait two weeks to get it back. Saved the service fee of around $150. A+ for you and the presentation!
Thank you! I'm glad your back up and running. Please give this video a thumbs up and share my channel to help it grow! Thank you for the kind comment and supporting my channel.
Perfect video! Just used this to take apart and clean my carb right in time for a big snow storm coming tonight. Nothing like waiting until the last minute, but with this video I enjoyed myself doing it. Had being running like trash and surging. Purrs like a kitten now. Thank you! Everything was right on! 100!
Brad your video is so good I was able to fix my snow blower. Needle valve was clogged. This machine should come with a fuel shut off to avoid this problem. Other machines I had I would shut off the gas valve and run it until it ran of gas! Great video!
I'm glad your back up and running! I would suggest not buying pump gas or at least buy non-ethanol pump gas if you can. We do not have non ethanol gas in our area. Aspen4 is what I highly suggest using and you will not need to rebuild your carburetor again. You are 100% correct. If they would put a fuel shut off inline, you could run the machine dry. Thank you for watching and the kind comment!
We have our first storm coming in tonight. And I tried for an hour trying to find the way to take the choke knob off. Your video helped me perfectly. What was even more impressive was I tried first to drain the carburetor bowl cup and watched until the new fresh gas started draining. Since it was dark, been working on it for 2.5 hours, my fingers were cold, I just prayed that draining the carb bowl would work and I put the parts back in and started it right up. Thank god. I appreciate your video. Thank you
I’m glad it all worked out and your back up and running. Thank you for the kind comment:). Please give this video a like and share the channel to help it grow! It would be greatly appreciated.
I’m glad it was was helpful and you’re back up and running! Thank you for sharing in the kind comment. Please give this video alike and share the channel to help it grow. It would be greatly appreciated!
I watched a different video that didn’t go into the level of detail and was left feeling defeated after quite a bit of work and still no start. Found this video later on and repeated the work with the additional details in this tutorial and BOOM! It started right up! Thank you so much for sharing a complete and detailed cleaning process!
I'm glad this video was helpful, your back up and running and thank you for the kind comment. Please give this video a thumbs up and share my channel to help it grow. It would be greatly appreciated!
I just used this video to rebuild and clean a carburetor and hands down the best video. Someone else said your camera work was spot on. Very helpful, small hints throughout. Very very very good video thank you!!!
I’m glad it was helpful and thank you for the kind comment! Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated.
Great job on the video. I'd called to get someone to come and fix my snow blower, but they were backed up. So I was lucky enough to find your video and it was clear enough that it walked a non-mechanic (me) right through the process -- snow blower now working. Thanks!
I’m glad it was helpful and thank you for the kind comment. I try to explain and show the video so most anyone can perform the task. My opinion, you just need to a positive outlook and you can do anything. Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for supporting the channel!
Excellent video, great explanation on how to effectively clean you snowblower’s carburetor! I felt confident after watching this video to take a non-starting cub, to a purring first pull running snowblower. Thank you for the lesson very appreciative of your time to help others!
I'm glad it was helpful and you were able to get your machine back up and running! Please give this video as thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
Hey just wanted to say a big thank you for making this! you taught me how to troubleshoot and replace my old carb, I had no clue how to do it before watching your walkthrough video. you have a knack for teaching!
I’m glad it was helpful and your back up and running:) Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated. Thank you for watching!
Thank you for this excellent video. I have the same model machine with about two hours on it. Same problem, despite the fact that I drained the fuel last year and ran it dry. Anyway, with your video as a guide, I removed, dismantled the carb, cleaned, and reinstalled it. It now runs perfectly!
I’m glad it was helpful and thank you for the kind comment. Thanks for sharing and glad to hear all went good! Please give this video a thumbs up and share my channel to help it grow. It would be greatly appreciated! Thank you for supporting my channel!
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated!
Thank you so much! This video was exactly what I needed to get my snow blower back up and running. Didn't get much snow last winter so hadn't started it in 2 years. Good reminder to always drain any gas out of the carb before storing for the season.
Im glad it was helpful and you were able to get up and running! Thank you for watching and the kind comment. Please give this video a like, subscribe if you haven’t yet and share the channel to help it grow. It would be greatly appreciated!
I’m glad it was helpful and your back up and running. Thank you for watching and the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel with your friends to help it grow. It would be greatly appreciated. Take care.
A big thank you from me. Snow thrower was only on its second season and wouldn’t start. Followed your lead and cleaned gunk out of one of the jets and it fired right up. The fuel must have been horrible because it left a residue on the o-ring of the carburetor bucket as well. A gas shut off valve on these would have been nice. I’ll just have to use a bunch of stabilizer in the spring. Thanks again!
Thank you for watching and the very kind comment. I am happy your back up and running. Please give this video a like, subscribe if you haven't yet and share my channel to help it grow. It would be greatly appreciated!
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
Thank you for taking the time to make this video, it helped me a lot today to clean out the Jets of a very similar model cub cadet I didn’t have much confidence taking this all apart, but watching your videos was really super helpful This thing runs so smooth now !!!! 🙂🏁😎
It is always nice to hear when a machine is running as it should after performing the task. I’m sure you feel great to! Thank you for watching and the kind comment.
Excellent video. Very detailed showing the dismantling of the carburetor and the reinstallation. Your video skills were excellent. I could get my spark pug out but I was able to get starter fluid into the carb and realized I had a carb issue. The other was I could not get a wire small enough to get into the jet that is black and is encased in plastic. I soaked it in gumout and found speaker wire thin enough. It was much harder than the smallest needle I ever had to thread. 0:06
I’m glad it was helpful and thank you for the kind comment. I hope it all worked out and your back up and running. Please give this video a thumbs up and share my channel with your friends to help it grow. It would be greatly appreciated! Take care
I'm glad you were able to get your machine up and running again and thank you for sharing. Please give this video a thumbs up, subscribe to my channel if you haven't already and share my channel to help it grow. It would be greatly appreciated!
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
Hey Brad. Great video. I think this is exactly what is wrong with my snowblower. Last spring i bought it three days before the last snow storm of the season. It worked great but haven't run it since. Watching your video I suspect it's a gummed up the jet and emulsifier. Should i completely drain the fuel after each season? Cheers from Nova Scotia 🇨🇦
Everyone has there opinion on how to store your machine. In our area we do not use them much so for the last few years I have been suggesting start using Aspen4 gas. Check out the link to read up on it and to see if it may be good for you and if you can get it in your area.www.aspenfuels.com/products/alla/aspen-4/. (1) If you use your machine every year for a few months, I would suggest using Aspen 4 or good gas with fresh fuel stabilizer. Fill the tank full, then run it every 45 to 65 days for 15 minutes. (2) If you want to run the machine dry, use aspen 4 fuel or good gas with fresh stabilizer and run machine dry, then remove the side bolt on the carburetor and drain until empty. Shake the machine and make sure all gas it out of tank, fuel line and carburetor. You should be good to go either way! Thank you for watching and I hope you get going soon. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
Thanks so much for posting this video and for the thorough instruction. This was way above my skill level but I was able to get through it and it worked!! Thanks!!!
I’m glad it was helpful, your back up and running and the kind comment! Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated. Thank you for watching!
I'm glad it was helpful and thank you for the kind comment! Please give this video a thumbs up, subscribe and share my channel to help it grow. It would be greatly appreciated! Thank you for watching.
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated.
I'm glad this video was helpful! and thank you for the kind comment! Please give this video a thumbs up and share my channel to help it grow! It would be greatly appreciated!
I’m glad it was helpful. Thank you for the kind comment and for watching! Please give this video a like, and share my channel to help it grow. It would be greatly appreciated.
great video, well explained! loved the paper towel tip for holding the difficult bolt! sub'd & liked. we cant even buy Ethanol free gas up here! ...Mac
I’m glad it was helpful! Thank you for the kind comment and supporting my channel. Please give this video a thumbs up and share my channel to help it grow. I can’t get non ethanol gas either. Aspen4 is the best way to go if you do not want any more carburetor issues.
i’m glad it was helpful. Thank you for the kind comment and for watching. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated!
Great video, thumbs upped and subscribed! Walked through everything and got my blower started again, but now have blue smoke out the exhaust while running for a minute or so. Would anything about cleaning the carb cause this? I didn't think I overfilled oil but wondering if I failed to reset a gasket somewhere.
Double check to make sure the oil is level and not too high on the dipstick and double check and quadruple check if needed. make sure you’re on level ground when checking the oil level or at least the engine is level double check to make sure the oil is not very thin as in smells like gas. If you have any doubts that there may be gasoline in the oil, then change it. if everything checks out and your oil level is good and it does not smell like fuel, then I would suggest running the machine at a standstill for about 10 minutes and see if it goes away. Sometimes after we struggle to get our machines running there is an abundance of gas that’s in the muffler that needs to burn away.
Thanks @@JohnsonsSmallEngines - dipstick was on the high side, so I drained 3-4 ounces of oil and restarted, no blue smoke! Ran it for 5 minutes with no trouble. Beyond thrilled that your videos exist. Thanks again!
I’m glad it was helpful and I’m hoping you’re back up and running! Thank you for sharing and the kind comment. Please give this video a like and share my channel to help it grow. Subscribe if you haven’t already. It would be greatly appreciated!
I'm replacing the carb. How do you get the choke extender shaft off? There are 2 locking tabs 90 degrees apart but I can't seem to get the shaft off the old carb
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated!
I’m glad it was helpful and I hope your back up and running! Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
I came across your channel today and I hope I get to the point when my videos come out as nicely as this video. Do you edit your videos or someone else?
Yes, but my opinion and from what I have learned is TruFuel does work, it’s non ethanol, and has stabilizers in it and is much better than pump gas but it still has the harmful products inside that are very bad for the environment and ourselves. It also doesn’t stay fresh as long as Aspen4. The bottom line is yes if you only can get Tru fuel, then I absolutely suggest using it over pump gas if you cannot get Aspen4
ok, I appreciate your input. I only asked about the Trufuel because there is an Ace Hardware just down the street that sells that. Went to the Aspen 4 website and checked on the dealer search for my city and there is one place a half hour away that I will go there to purchase for my snowblower.@@JohnsonsSmallEngines
I'm glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated!
Correct, there is not an air cleaner on most snow throwers built after 2000 unless there was a engine change during the life of the machine and did not use a snow engine.
Idle speed screw: when I have to remove that I will turn it IN as I count 1/2 turns so I know how far out it was. Then I write it down. That way when I replace it I can simply snug it down, DON’T OVERTIGHTEN, and then turn out the appropriate number.
Most factory settings are 3600 to get the most horse power but I have found that at 3600 rpm’s many engines will burn more oil. I set most of my equipment I work on at 3300 rpms as it does not effect much loosing 300rpms and the engine will last so much longer. Except generators. Generators must run at 3600 rpms so the electricity is constant set at a curtain output.
If you are talking about the metal fuel inlet on the side of the carburetor? I have not come across that issue. They are pressed in from when they are made and if it was loose, it would have leaked fuel as soon as you filled the gas tank up.
well my carb was plugged, i lifted the hose with your same tool and when i grabbed the hose lifted it off the barb was in it, i contact cub and told them about this issue, but decided to replace the wholw carb with a new one, only 45.00 dollars
This was so helpful. Brad is so knowledgeable and is thorough an precise in his instructions. My son has this machine, one year old an wouldn't start. This video got us up and running. Thanks, Brad!! On a scale of 1 to 10, this was a 12!!
I'm glad it was helpful and thank you for the kind comment!
Living is WNY, a snowblower is a must. Mine wouldn’t start. What a phenomenal educational video. Followed your directions, took the carburetor apart, found the issue with a clogged jet, cleaned it, put it back together and it fired right up. Thank you sir, keep up the great videos.
I’m glad you’re back up and running! Thank you for sharing and the kind comment!
Just got the Cub Cadet out today after 8 months and sure enough it didn’t start. Watched this video twice and did everything you said and it then started first pull! This was the best explained video I saw on the topic. Thank you so much!
I'm glad it was helpful and your back up and running. Please give this a thumbs up and share my channel to help it grow. It would be greatly appreciated!
I'm with the previous commenters. Excellent presentation for trouble shooting and minor carb cleaning.
Brad supplements users manuals by lending his experiences to problems that might crop up.
Saves having to load the blower onto a trailer to take to the maintenance center.
With a storm coming in three hours and a Cub Cadet that won’t start you saved me big time. Followed your instructions and she is running great. Thanks.
I’m glad it was helpful! Thank you for sharing, watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!
I had a stroke years ago and only have use of 1 hand. I'm glad I found your channel.
Thank you for supporting my channel!
This is the most comprehensive and descriptive video I have ever seen in a while. GREAT JOB!!!
Thank you! I’m glad you liked it. Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
After watching your video once from start to finish I completed a full carb clean in under 30 minutes. It started first try!!! Thank you!!! @@JohnsonsSmallEngines
The level of detail, tips, and facts you give us is incredible. After watching other videos on the same subject yours is by far the best. The videography is also great as you provide clear video which is focused where the viewer would want to focus on. The lighting is great as well. Overall great instructional video which has given me the confidence to tackle this tonight as a winter storm is looming and I already have a layer of snow to remove. Your comment on the effects of leaving fuel in the machine over storage (even with stabilizer) is now prompting me to run it dry before storage going forward. I don't have access to that clean fuel you mentioned here in Canada, but I can use your other tips to counter act. Liked and Subscribed, thank you.
I'm glad this video and another was helpful. Thank you for sharing, the very kind comment and supporting the channel. It is greatly appreciated! Please share my channel to help it grow :) Take care.
Watching you work wears me out. I need a break.
LMAO! I think you should get out and walk more. LOL
The detail you show allows the repair to be done without any doubts or questions. Job well done !!
Thank you! You made my holiday! I’m glad it was helpful and thank you for the very kind words.
I have the exact snow blower with this problem. Won't start. I followed all of your instructions. The video and explaination is right on. Cleaned the carb, put it back on the blower and it started on the first try. Thank you so much. Saved me from having to haul it to a shop and back. Would have probably had to wait two weeks to get it back. Saved the service fee of around $150. A+ for you and the presentation!
Thank you! I'm glad your back up and running. Please give this video a thumbs up and share my channel to help it grow! Thank you for the kind comment and supporting my channel.
Perfect video! Just used this to take apart and clean my carb right in time for a big snow storm coming tonight. Nothing like waiting until the last minute, but with this video I enjoyed myself doing it. Had being running like trash and surging. Purrs like a kitten now. Thank you! Everything was right on! 100!
Me too. Same thing living in Connecticut but I only had to drain the carb bowl cup. Thank god.
I’m glad it was helpful and thank you for the kind comment.
@@pauld2502 lol yup. Right over the state line. Snowing now!
Brad your video is so good I was able to fix my snow blower. Needle valve was clogged. This machine should come with a fuel shut off to avoid this problem. Other machines I had I would shut off the gas valve and run it until it ran of gas! Great video!
I'm glad your back up and running! I would suggest not buying pump gas or at least buy non-ethanol pump gas if you can. We do not have non ethanol gas in our area. Aspen4 is what I highly suggest using and you will not need to rebuild your carburetor again. You are 100% correct. If they would put a fuel shut off inline, you could run the machine dry. Thank you for watching and the kind comment!
We have our first storm coming in tonight. And I tried for an hour trying to find the way to take the choke knob off. Your video helped me perfectly. What was even more impressive was I tried first to drain the carburetor bowl cup and watched until the new fresh gas started draining. Since it was dark, been working on it for 2.5 hours, my fingers were cold, I just prayed that draining the carb bowl would work and I put the parts back in and started it right up. Thank god. I appreciate your video. Thank you
I’m glad it all worked out and your back up and running. Thank you for the kind comment:). Please give this video a like and share the channel to help it grow! It would be greatly appreciated.
Thank you so much, saved me from having to take this in to the repair shop a day before 6-8 inches of snow will fall. Worked like a charm!
I’m glad it was was helpful and you’re back up and running! Thank you for sharing in the kind comment. Please give this video alike and share the channel to help it grow. It would be greatly appreciated!
I watched a different video that didn’t go into the level of detail and was left feeling defeated after quite a bit of work and still no start. Found this video later on and repeated the work with the additional details in this tutorial and BOOM! It started right up! Thank you so much for sharing a complete and detailed cleaning process!
I'm glad this video was helpful, your back up and running and thank you for the kind comment. Please give this video a thumbs up and share my channel to help it grow. It would be greatly appreciated!
I just used this video to rebuild and clean a carburetor and hands down the best video. Someone else said your camera work was spot on. Very helpful, small hints throughout. Very very very good video thank you!!!
I’m glad it was helpful and thank you for the kind comment! Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated.
@@JohnsonsSmallEngines Done!!! Thanks again man!!!
Great job on the video. I'd called to get someone to come and fix my snow blower, but they were backed up. So I was lucky enough to find your video and it was clear enough that it walked a non-mechanic (me) right through the process -- snow blower now working. Thanks!
I’m glad it was helpful and thank you for the kind comment. I try to explain and show the video so most anyone can perform the task. My opinion, you just need to a positive outlook and you can do anything. Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for supporting the channel!
Excellent video, great explanation on how to effectively clean you snowblower’s carburetor! I felt confident after watching this video to take a non-starting cub, to a purring first pull running snowblower. Thank you for the lesson very appreciative of your time to help others!
I'm glad it was helpful and you were able to get your machine back up and running! Please give this video as thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
Hey just wanted to say a big thank you for making this! you taught me how to troubleshoot and replace my old carb, I had no clue how to do it before watching your walkthrough video. you have a knack for teaching!
I’m glad it was helpful and your back up and running:) Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated. Thank you for watching!
Thank you for this excellent video. I have the same model machine with about two hours on it. Same problem, despite the fact that I drained the fuel last year and ran it dry. Anyway, with your video as a guide, I removed, dismantled the carb, cleaned, and reinstalled it. It now runs perfectly!
I’m glad it was helpful and thank you for the kind comment. Thanks for sharing and glad to hear all went good! Please give this video a thumbs up and share my channel to help it grow. It would be greatly appreciated! Thank you for supporting my channel!
Excellent video. You were very thorough and explained the whole process very well. Thank you!
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated!
Thank you so much! This video was exactly what I needed to get my snow blower back up and running. Didn't get much snow last winter so hadn't started it in 2 years. Good reminder to always drain any gas out of the carb before storing for the season.
I’m glad it was helpful and your back up and running! Thank you for the kind comment.
Excellent tutorial...great step by step instructions.Allowed me to do my own repair and now runs smoothly.
Im glad it was helpful and you were able to get up and running! Thank you for watching and the kind comment. Please give this video a like, subscribe if you haven’t yet and share the channel to help it grow. It would be greatly appreciated!
Thanks for taking the time & making this video. I had the same issue with my Cub Cadet. You helped me get it running in no time! Much appreciated
I’m glad it was helpful and your back up and running. Thank you for watching and the kind
comment. Please give this video a like, subscribe if you haven’t yet and share my channel with your friends to help it grow. It would be greatly appreciated. Take care.
A big thank you from me. Snow thrower was only on its second season and wouldn’t start. Followed your lead and cleaned gunk out of one of the jets and it fired right up. The fuel must have been horrible because it left a residue on the o-ring of the carburetor bucket as well. A gas shut off valve on these would have been nice. I’ll just have to use a bunch of stabilizer in the spring. Thanks again!
I’m glad it was helpful. Thank you for sharing and the kind comment.
Fantastic video! I very much appreciate you posting this great guide. You are a talented individual in so many ways! Got my machine back running!
Thank you for watching and the very kind comment. I am happy your back up and running. Please give this video a like, subscribe if you haven't yet and share my channel to help it grow. It would be greatly appreciated!
Dude you rock I am a DIYer and the video was great! Saved me a Ton Chicago winter is here and you made me Ready.
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
You are like a good movie. I just knew you would have a happy ending! LOL Great job Sir. I'll be waiting for the next happy ending.
LOL!
Thank you for taking the time to make this video, it helped me a lot today to clean out the Jets of a very similar model cub cadet
I didn’t have much confidence taking this all apart, but watching your videos was really super helpful
This thing runs so smooth now !!!! 🙂🏁😎
It is always nice to hear when a machine is running as it should after performing the task. I’m sure you feel great to! Thank you for watching and the kind comment.
Excellent video. Very detailed showing the dismantling of the carburetor and the reinstallation. Your video skills were excellent. I could get my spark pug out but I was able to get starter fluid into the carb and realized I had a carb issue. The other was I could not get a wire small enough to get into the jet that is black and is encased in plastic. I soaked it in gumout and found speaker wire thin enough. It was much harder than the smallest needle I ever had to thread. 0:06
I’m glad it was helpful and thank you for the kind comment. I hope it all worked out and your back up and running. Please give this video a thumbs up and share my channel with your friends to help it grow. It would be greatly appreciated! Take care
I had the same problem. Could not find wire small enough for the plastic jet. Ended up using the end of a small resistor from an electronics project!
Awesome video, thank you for sharing. As a total novice, I was able to get mine back running on the first pull.
I’m glad you’re back up and running! Thank you for the kind comment.
This is an excellent video! Great explanations, details and tips. You helped me solve my problem and get my blower back in action. Thank you!
I'm glad you were able to get your machine up and running again and thank you for sharing. Please give this video a thumbs up, subscribe to my channel if you haven't already and share my channel to help it grow. It would be greatly appreciated!
Brad, excellent video and your instruction.
Thannk you! I'm glad you liked. Thank you for watching and the kind comment.
@@JohnsonsSmallEngines I always gain a little more knowledge in your instructional videos.
Great video, very detailed. Thanks for helping me cleaning that carburetor.
Glad to help!
Great tutorial man. Everything went as your instructions 20 25 min job if your thorough. Thank you
I’m glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
Great video! Worked like a charm and got the snowblower I was working on running like a top!
Glad to hear! Thanks for sharing and the kind comment.
Very useful! jet was clogged, great video good job!!!
I'm glad your back up and running! and thank you for the kind comment.
Hey Brad. Great video. I think this is exactly what is wrong with my snowblower. Last spring i bought it three days before the last snow storm of the season. It worked great but haven't run it since. Watching your video I suspect it's a gummed up the jet and emulsifier. Should i completely drain the fuel after each season? Cheers from Nova Scotia 🇨🇦
Everyone has there opinion on how to store your machine. In our area we do not use them much so for the last few years I have been suggesting start using Aspen4 gas. Check out the link to read up on it and to see if it may be good for you and if you can get it in your area.www.aspenfuels.com/products/alla/aspen-4/. (1) If you use your machine every year for a few months, I would suggest using Aspen 4 or good gas with fresh fuel stabilizer. Fill the tank full, then run it every 45 to 65 days for 15 minutes. (2) If you want to run the machine dry, use aspen 4 fuel or good gas with fresh stabilizer and run machine dry, then remove the side bolt on the carburetor and drain until empty. Shake the machine and make sure all gas it out of tank, fuel line and carburetor. You should be good to go either way! Thank you for watching and I hope you get going soon. Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated!
Thanks so much for posting this video and for the thorough instruction. This was way above my skill level but I was able to get through it and it worked!! Thanks!!!
I’m glad it was helpful, your back up and running and the kind comment! Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated. Thank you for watching!
Thorough and well-done! Thanks!!
I'm glad it was helpful and thank you for the kind comment! Please give this video a thumbs up, subscribe and share my channel to help it grow. It would be greatly appreciated! Thank you for watching.
Very efficient video. Do you have a video on changing oil? Or do you just pump the oil out and refill?
Can You Film A Video About How To Operate A 2011 Troy bilt mustang xp 50 inch
Awesome! Just what I needed to understand. Thanks.
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated.
Great video bud! sure appreciate the detailed explanation.
I'm glad this video was helpful! and thank you for the kind comment! Please give this video a thumbs up and share my channel to help it grow! It would be greatly appreciated!
Excellent tutorial video. !
Thank you! I’m glad it was helpful!
This helped a lot man thank you.
I’m glad it was helpful. Thank you for the kind comment and for watching! Please give this video a like, and share my channel to help it grow. It would be greatly appreciated.
great video, well explained! loved the paper towel tip for holding the difficult bolt! sub'd & liked. we cant even buy Ethanol free gas up here! ...Mac
I’m glad it was helpful! Thank you for the kind comment and supporting my channel. Please give this video a thumbs up and share my channel to help it grow. I can’t get non ethanol gas either. Aspen4 is the best way to go if you do not want any more carburetor issues.
Great video! You are a life saver👏🏾
i’m glad it was helpful. Thank you for the kind comment and for watching. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated!
The engine on the Cub Cadet looks exactly like the engine on my Troy Built Storm 2410, do you know what company manufactures it?
China import to put on your machine. The parts you can get through the parts breakdown of the machine you have (TroyBilt) made by MTD.
Great video, thumbs upped and subscribed! Walked through everything and got my blower started again, but now have blue smoke out the exhaust while running for a minute or so. Would anything about cleaning the carb cause this? I didn't think I overfilled oil but wondering if I failed to reset a gasket somewhere.
Double check to make sure the oil is level and not too high on the dipstick and double check and quadruple check if needed. make sure you’re on level ground when checking the oil level or at least the engine is level double check to make sure the oil is not very thin as in smells like gas. If you have any doubts that there may be gasoline in the oil, then change it. if everything checks out and your oil level is good and it does not smell like fuel, then I would suggest running the machine at a standstill for about 10 minutes and see if it goes away. Sometimes after we struggle to get our machines running there is an abundance of gas that’s in the muffler that needs to burn away.
Thanks @@JohnsonsSmallEngines - dipstick was on the high side, so I drained 3-4 ounces of oil and restarted, no blue smoke! Ran it for 5 minutes with no trouble. Beyond thrilled that your videos exist. Thanks again!
Glad to hear!!! and thank you for supporting the channel!
Thanks for the video. It helped a lot.
I’m glad it was helpful and I’m hoping you’re back up and running! Thank you for sharing and the kind comment. Please give this video a like and share my channel to help it grow. Subscribe if you haven’t already. It would be greatly appreciated!
I'm replacing the carb. How do you get the choke extender shaft off? There are 2 locking tabs 90 degrees apart but I can't seem to get the shaft off the old carb
Great video….. huge help thank you!!
I’m glad it was helpful and thank you for the kind comment.
Thank for this great video - what is the best gas to use on this machine ?
Aspen4 as shown in this video! I’m glad this video was helpful! Please give it a like to help the channel.
Thanks a lot great video
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven’t already and share my channel to help it grow. It would be greatly appreciated!
Great video amazing 👍Thanks!
I’m glad it was helpful and I hope your back up and running! Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
I came across your channel today and I hope I get to the point when my videos come out as nicely as this video. Do you edit your videos or someone else?
Thank you! I edit all of my videos.
Great job
I’m glad it was helpful!
Would Trufuel 4 cycle be comparable to Aspen 4 fuel?
Yes, but my opinion and from what I have learned is TruFuel does work, it’s non ethanol, and has stabilizers in it and is much better than pump gas but it still has the harmful products inside that are very bad for the environment and ourselves. It also doesn’t stay fresh as long as Aspen4. The bottom line is yes if you only can get Tru fuel, then I absolutely suggest using it over pump gas if you cannot get Aspen4
ok, I appreciate your input. I only asked about the Trufuel because there is an Ace Hardware just down the street that sells that. Went to the Aspen 4 website and checked on the dealer search for my city and there is one place a half hour away that I will go there to purchase for my snowblower.@@JohnsonsSmallEngines
How much does this usually take by someone skilled?
great video
I'm glad it was helpful and thank you for the kind comment. Please give this video a thumbs up, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated!
Is there no air cleaner housing/element?
Correct, there is not an air cleaner on most snow throwers built after 2000 unless there was a engine change during the life of the machine and did not use a snow engine.
Mine is stalling. I was going to clean it but now I think I look for a new carburetor for a John Deere 32 inch snowblower on Amazon.
Idle speed screw: when I have to remove that I will turn it IN as I count 1/2 turns so I know how far out it was. Then I write it down. That way when I replace it I can simply snug it down, DON’T OVERTIGHTEN, and then turn out the appropriate number.
Problem is there's no room for a gas filter ! 🤔
Its inside the fuel tank and some newer machine have a hidden filter in the fuel line. th-cam.com/users/shorts2qkBXxRi8AY
What is the required RPM at Full throttle on these Cub cadet engines? Anyone know is a 3200 or is it 3600?
Most factory settings are 3600 to get the most horse power but I have found that at 3600 rpm’s many engines will burn more oil. I set most of my equipment I work on at 3300 rpms as it does not effect much loosing 300rpms and the engine will last so much longer. Except generators. Generators must run at 3600 rpms so the electricity is constant set at a curtain output.
have you had a new unit with a fueline barb come off with the hose? only 2 years old
If you are talking about the metal fuel inlet on the side of the carburetor? I have not come across that issue. They are pressed in from when they are made and if it was loose, it would have leaked fuel as soon as you filled the gas tank up.
well my carb was plugged, i lifted the hose with your same tool and when i grabbed the hose lifted it off the barb was in it, i contact cub and told them about this issue, but decided to replace the wholw carb with a new one, only 45.00 dollars