I've been in this hobby over 40 years there was no such thing as RTR back in the day you built everything which is actually a good thing if you need to work on your vehicle you know how it went together I built quite a few, Team Associated had really nice kits back then, and the reward was how nice they ran and knowing you put it together
This looks like it’s gonna be a great rig. I love how the motor is so forward and has a scale cover. I don’t think I would use the dig . Can’t wait to see the body paint and build. Thanks for posting 👍👍
Not sure if you guys cares but if you are bored like me atm then you can watch all the new series on InstaFlixxer. Have been streaming with my brother for the last months =)
Personally I would like a review of everything working ie 2 speed and dig just so we can see how it works with a set up for people who cant afford the brushless set up . Over all tho thanks very informative 👍
Brushed motors are famous for their low end torque and smooth start up, not much top end speed (depending on turns). Sensorless Brushless systems have torque and top end speed (depending on kv), but not a smooth start up - when you add a sensored brushless set up, you get all three worlds - smooth start up (being sensored), torque and top end speed (depending on kv)
Laughed when you were talking about stuffing up Rich. I’m building the Tamiya Sand Scorcher and I’m tired, and same as you making mistakes. Getting towards the hard plastic stuff now, where it is gluing, painting etc. so I do have to stop for the night which is a good thing. As I look at the rear wheel and tyre on one side, the tread is facing the wrong way. And those suckers took forever to get the centre in the edge of the tyre without the five 10x2mm screws and matching nuts. Tomorrow’s job! Goodnight and thanks for the build review 👍🤓🇦🇺
Oh I’ve been telling everyone to support their local hobby shop purchasing from them some will even ship if you don’t want to be onsite. Alright stay safe everyone.
The RCNetwork thanks just finished it up today. Got some proline Mud terrain tires on SSD bead locks looks Amazing. For electronics I ran hobbywing Axe. What will you run in yours? Waiting to see Final reveal.
Great video allot of great tips and knowledge. I own 3 scx10 iii, 2 jl and 1 gladiator. I love em all. I am working in the kit rite now and I used allot of your steps, thank you
I'm glad to see a fresh ground up new truck from them, and not just another rehash of the aging older platform, I'm definitely interested to see if they are setting this up for a portal less version and what size tire combo will fit it
They've already mentioned the capability of a portal-less drivetrain - most 1.9" wheels will fit - the JLU body is ideal . for the 4.75" Nittos, so basically anything 1.9" will work. The stock wheels seem to be about 225SLW size
Thanks for sharing, it is one of the best reviews I have seen. I had my doubts about buying this kit, but after seeing the details that you show in the video, I think it may be a new vehicle in my garage. Thank's
They have taken the scx platform to a whole new level and takes time to come out with all the new tooling to make and design the parts. That has to cost a lot of time and money. Money they did not have in the past until the new ownership.
Very professional review 👍👍👍 after seeing this build there’s no way I can do it with my arthritic hands, so I will wait for the RTR version👍 I hope they come out with white if not I’m sure they will sell the body down the road and I will paint it white, i want it to match my real life Jeep
Thanks buddy! It's not as bad as it looks - a power drive is the key (with a clutch) . I'm sure the RTR will be released soon - likely that Blue that the shops have and maybe a silver? Axial always releases the clear body set - but usually a few months after the main releases. It will be expensive though, as they have to include all of the parts in that second to last bag I hadn't opened
Depends on the look and how capable you want the rig. the Capra can do anything...but is a pain to gain access to the electronics. The scx10iii can be made into almost anything (body wise) and has a TON of options to make cool.
Probably not going to see this but do you know what thread count tap you should use for the shock mounts because I need to tap the rest of them after stripping a bolt
The Pre-Release started last Thursday - many that pre-ordered have are getting them today - click the link in my video description. They have them on Pre-Order still
Hey Rich. Awesome video as always. I was wondering if you could do an update video on the MT410? How reliable it’s been? Any breakages? Was wanting to get my first kit and the MT410 definitely got my attention. Love your old videos on it.
Thanks David! The MT410 is a great truck - don't hesitate on purchasing. I've broken 2 body mounts and that's it on mine. I've done zero upgrades and very little maintenance. It's solid!
Not sure, I have the motor mounted - but likely have to turn the motor to the side for the wires. Just started ,messing with it last night while this video was uploading. The main issue is the sensor wire
If we base what we know from the Capra - likely 2 months or so for the RTR - price will be pretty high though, as the Capra did include the dig, servo, etc
the transmission alone will be very labor intensive - I bet the RTR is going to be on the plus side of 500 easily, especially if they include the two speed and dig features...
Did you get the RTR? I just got mine. My first since my Associated RC10 nearly 40 years ago!! No way was I interested in building this one. It's an awesome rig and very capable with my biggest complaint being that the shocks leak and were pretty much flat right out of the box. They're pretty good feeling shocks with oil in them but the mod bug hit already a day after arrival and today, my Pro-line shocks will be here. I don't want to chase the known leaker issue. I'm running DIG and it's a great feature, IMO. The 2 speed is supposedly too close in ratio to be worth adding a servo. Maybe when I wear out the motor and replace the electronics package I'll give a try.
Great Video and it helped me a lot to see the kits quality, which looks great. I don't know if you answered that allready, but how long does it took you to build completely? Since I am looking for a kit a can spend some time on that would be very interesting for me. Keep up the great work and thanks for the video 👍
The chassis took about 4-5 hours, depending on your skill level and electronics choices. the body was another good 3+ hours, once again depending on the complexity of the paint job, etc. I never build in one sitting....usually over the course of a few days
Understandable I just kind of feel like everybody makes Jeep bodies. I feel like a good set of wheels would change the look of the whole truck so maybe I'd be more into it after that!
Looks like a decent project I could get into. Q, I've heard you can fit a 550 motor in there with some trimming to the engine case, does it seem possible? I was thinking about the HW Axe 550 system. If so, will it be overkill to fit it with 2 speed?
I mounted a 540 motor last night...and there is room for a 550 (although I didn't test) . Everything will be tight, regardless because of the "motor" facade.
Thank you for this review! I don't think this is the right truck for me.... it's TOO perfect, it's TOO nice! I would hate to ruin anything on it, and that would stop me from bashing the way I truly want to. Maybe I should take a second look at the cheaper RTR crawlers this spring, knowing how I feel about the much anticipated rig that is truly designed to be at the top of the game.
Transmission looks freakin great. I hear they are working on the portal delete version of some sort and that’s the one thing I don’t like about the new truck.
Your tires are on backwards. The tread is supposed to throw out debris, not bring it in. Crap,, never mind.. I thought the other end was the front. LOL My bad. BUT,, This post may serve others well, so I'll leave it here.
I didn't have to tap them, although Horizon Hobbies/Axial recommends this. The Panhard mount/driver side shock tower is also an issue is you run a decent servo....it will end up breaking
Come on Axial. It's a Jeep aka MOPAR . No one in their right mind in the one to one world would put an LS into a Jeep . Infact the engine this rig comes with is a GEN3 Hemi. That is the molded engine that this kit should have. If it was a bronco put a molded cyotee or 351 an if it's GM then put that garbage LS or small block Chevy into it.
I've been in this hobby over 40 years there was no such thing as RTR back in the day you built everything which is actually a good thing if you need to work on your vehicle you know how it went together I built quite a few, Team Associated had really nice kits back then, and the reward was how nice they ran and knowing you put it together
Best TH-cam Rc Channel
Thanks Marco!! I would say that too, but people say I'm biased 😉
Awesome video! Best build video on TH-cam by a mile!
Thanks Jay - glad to help
This looks like it’s gonna be a great rig. I love how the motor is so forward and has a scale cover. I don’t think I would use the dig . Can’t wait to see the body paint and build. Thanks for posting 👍👍
Not sure if you guys cares but if you are bored like me atm then you can watch all the new series on InstaFlixxer. Have been streaming with my brother for the last months =)
@Reese Larry Yea, have been using instaflixxer for years myself :D
I’m so excited for mine to come! This video helped so much! Thanks
Glad to help, Matt - and happy building!
Personally I would like a review of everything working ie 2 speed and dig just so we can see how it works with a set up for people who cant afford the brushless set up . Over all tho thanks very informative 👍
Thanks for watching!
Good point on not using a power driver on the shock mounts. I wouldn't have thought of that. Thanks for the review!
Glad to help - it's a super stiffplastic for a reason, but brittle when driving a steel screw in it
@7:40. ### Why does a brushless sensor motor negate the need to use the 2 speed?###
Brushed motors are famous for their low end torque and smooth start up, not much top end speed (depending on turns). Sensorless Brushless systems have torque and top end speed (depending on kv), but not a smooth start up - when you add a sensored brushless set up, you get all three worlds - smooth start up (being sensored), torque and top end speed (depending on kv)
Great build review video. I plan on getting one by the end of the year. Can't wait to see the body build.
Good deal! Yes, I should be painting this week
Thanks for the several tips Rich. You definitely pointed out issues that others previously overlooked. Great job!
Cool, glad to help. I haven't watched anyone else's video except for Matt's first one. I like to keep and open mind and point out what I see
@@TheRCNetwork And you did just that. Nice!
Laughed when you were talking about stuffing up Rich. I’m building the Tamiya Sand Scorcher and I’m tired, and same as you making mistakes.
Getting towards the hard plastic stuff now, where it is gluing, painting etc. so I do have to stop for the night which is a good thing. As I look at the rear wheel and tyre on one side, the tread is facing the wrong way. And those suckers took forever to get the centre in the edge of the tyre without the five 10x2mm screws and matching nuts.
Tomorrow’s job!
Goodnight and thanks for the build review 👍🤓🇦🇺
I have a pretty standard rule now - no soldering after midnight. 😬
The RCNetwork a very good rule Rich! I’d probably have to add in no scalpel and reamer worker 😳
Rich I got mine today! Local shop got me on preorder. Thanks for build notes this will help me.
Oh I’ve been telling everyone to support their local hobby shop purchasing from them some will even ship if you don’t want to be onsite. Alright stay safe everyone.
Glad to help out - happy building!
The RCNetwork thanks just finished it up today. Got some proline Mud terrain tires on SSD bead locks looks
Amazing. For electronics I ran hobbywing Axe. What will you run in yours? Waiting to see
Final reveal.
Excellent in depth review! Very impressed with what Axial has done on the SCX10 III. Looking forward to getting mine tomorrow.
Thanks buddy! Happy building!
My kit arrives today, thank you for the tips!!
Nice! happy building!
Thank You sir...just got it in my hands. She's off to my build pile. :-)
Nice! happy building!
Thanks Rich, can't wait to "dig" into mine once it arrives.
Exactly! Happy building!
Great video allot of great tips and knowledge. I own 3 scx10 iii, 2 jl and 1 gladiator. I love em all. I am working in the kit rite now and I used allot of your steps, thank you
Glad to help, buddy!
The Apollo 3 - great comparison!
I know, huh?
I'm glad to see a fresh ground up new truck from them, and not just another rehash of the aging older platform, I'm definitely interested to see if they are setting this up for a portal less version and what size tire combo will fit it
They've already mentioned the capability of a portal-less drivetrain - most 1.9" wheels will fit - the JLU body is ideal . for the 4.75" Nittos, so basically anything 1.9" will work. The stock wheels seem to be about 225SLW size
Can’t wait to see if my SCX10ii with dig will be equal to this . Looks wise I love this whole rig
It really is a great design - but like you said, how will it be against the ii
Im liking these alot! You may have just convinced me to get one. Think i would run mine with the single speed and no dig (with a good brushless setup)
I'm configured with the dig, and single speed, for now
Im thinking thats how im gonna run too no micro servos to fail build it bullet proof
Thanks for sharing, it is one of the best reviews I have seen. I had my doubts about buying this kit, but after seeing the details that you show in the video, I think it may be a new vehicle in my garage. Thank's
Thanks for watching! It is a great truck
thumps up, you were spot on with all the issues it costed me lots of time as well
Thanks buddy for watching! Glad to have helped
They have taken the scx platform to a whole new level and takes time to come out with all the new tooling to make and design the parts. That has to cost a lot of time and money. Money they did not have in the past until the new ownership.
Exactly. I think they did a great job!
edit to add missing part of the post.
Great work. Best review I have seen. I am definitely buying this kit.
Thanks Burcin! glad tp have you watch
Very professional review 👍👍👍 after seeing this build there’s no way I can do it with my arthritic hands, so I will wait for the RTR version👍 I hope they come out with white if not I’m sure they will sell the body down the road and I will paint it white, i want it to match my real life Jeep
Thanks buddy! It's not as bad as it looks - a power drive is the key (with a clutch) . I'm sure the RTR will be released soon - likely that Blue that the shops have and maybe a silver? Axial always releases the clear body set - but usually a few months after the main releases. It will be expensive though, as they have to include all of the parts in that second to last bag I hadn't opened
Thank you Rich. Looks like it's gonna be great rig. Good job Axial.
Thanks for watching!
Great Build Rich, Great Video As Always.
Thanks buddy!
Looks like an impressive kit, can't wait to get one, great review 👍
It really is. I'm impressed
Great review & good tips! Mine is due any time now & can't wait!
Nice! Thanks for watching!
I bought a Redcat Gen8. Did I make a bad decision?
Any RC is a good decision. Worse case, it's a stepping stone to your next RC!
mine's on the way. i'm looking forward to building it. not much else to do right now since the creeping death is in our midst.
Seriously, right? I despise FB right now....all of these "death is in our midst" posts - I've been in my shop a ton lately
Aaaah to build this or a Capra...
Depends on the look and how capable you want the rig. the Capra can do anything...but is a pain to gain access to the electronics. The scx10iii can be made into almost anything (body wise) and has a TON of options to make cool.
Thank you! This is by far the best detailed review. Great job! 👍👍👍
Glad to help out, Norlito! Thanks for the nice comments
Love it the only thing I hate about it is it's not getting here fast enough
From what I hear, if you pre-ordered, it's being delivered now
Probably not going to see this but do you know what thread count tap you should use for the shock mounts because I need to tap the rest of them after stripping a bolt
I see every comment....and usually respond. It's a standard M3 screw.
For best result use a M3 thread die to cut the thread in the hard plastic to prevent heat build up.
Good tip.....I was flying blind on this build, as it was so new at the time
great info, very informative, should get mine Friday
Thanks buddy! Always good to see you in the comments - happy building
Would you be able to see if 10.2 sliders, and if body mounting holes are in the same location.
I don;t have a 10.2 at the moment.....they might be....as the floor pieces look really similar
Great presentation!
Thanks for watching
Great dude hi from Costa Rica 🇨🇷 🇺🇸🤜🏻🤛🏻❤️
Hi Ronald! Glad to have you watching!
So it’s all metal gears . No plastic gears any were . Even in the portal drive gears? And the over drive gears offered can they be used in the rear ?
Yes, they're all metal gears...except for the Spur gear
The wheels are 1.9 and the offset ist?
Not sure, it's all plastic. Likely a 225 in SLW terms
Great video
Thanks buddy!
How are the shocks?! Do they leak bad!?
No leaving on these - they're much improved over older Axial shocks
Really good review 👍
Thanks dude!
I love the transmission
There's alot going on, but it will hit many genre's of scale/crawlers
what is the tooth count on the micro servo savers, waiting on mine to show up......thanks
Looks like a 20t
@@TheRCNetwork Thanks Rich
Hopefully next we get the 6x6 with portals and 6 wheel steering
Everything's a possibility - but that's a lot to ask for....and a pretty big pricetag
When are they going to start selling them on their website says backorder
The Pre-Release started last Thursday - many that pre-ordered have are getting them today - click the link in my video description. They have them on Pre-Order still
What motor and esc are you going to use
For right now, the Hobbywing Axe system....but there might be issues with the length of the pre sized sensor wire
Great build as always! The material are Losi quality
Yeah, you can tell of the plastics. TLR had some influence
Can’t wait to see it finish. I love watching your build reviews
Thanks buddy!
Hey Rich. Awesome video as always. I was wondering if you could do an update video on the MT410? How reliable it’s been? Any breakages? Was wanting to get my first kit and the MT410 definitely got my attention. Love your old videos on it.
Thanks David! The MT410 is a great truck - don't hesitate on purchasing. I've broken 2 body mounts and that's it on mine. I've done zero upgrades and very little maintenance. It's solid!
I got the axe xerun sensored 1800kv am I going to have the same issue
Not sure, I have the motor mounted - but likely have to turn the motor to the side for the wires. Just started ,messing with it last night while this video was uploading. The main issue is the sensor wire
👍 thanks. Very detailed
Thanks for watching, Eric!
I want however I got to wait for RTR don't wanna build this kit
RTR will probably not have the 2 speed and dig all in one or it might. Hard to tell. Usually the kit supplies all the features.
If we base what we know from the Capra - likely 2 months or so for the RTR - price will be pretty high though, as the Capra did include the dig, servo, etc
the transmission alone will be very labor intensive - I bet the RTR is going to be on the plus side of 500 easily, especially if they include the two speed and dig features...
Did you get the RTR? I just got mine. My first since my Associated RC10 nearly 40 years ago!! No way was I interested in building this one. It's an awesome rig and very capable with my biggest complaint being that the shocks leak and were pretty much flat right out of the box. They're pretty good feeling shocks with oil in them but the mod bug hit already a day after arrival and today, my Pro-line shocks will be here. I don't want to chase the known leaker issue. I'm running DIG and it's a great feature, IMO. The 2 speed is supposedly too close in ratio to be worth adding a servo. Maybe when I wear out the motor and replace the electronics package I'll give a try.
@@OhMySack I will not get one had a capra and kept stripping portals so as nice of a rig as it is tf2 life for me and trx4 portals
These are awsome. They just need to to offer a electric pkg. For all kits
Yes, great kits. They do offer an RTR now....
Great Video and it helped me a lot to see the kits quality, which looks great. I don't know if you answered that allready, but how long does it took you to build completely? Since I am looking for a kit a can spend some time on that would be very interesting for me. Keep up the great work and thanks for the video 👍
The chassis took about 4-5 hours, depending on your skill level and electronics choices. the body was another good 3+ hours, once again depending on the complexity of the paint job, etc. I never build in one sitting....usually over the course of a few days
Hate the body and not a huge fan of the wheels. I'm super excited about this truck though. Id love to see a performance comparison from the scx10ii
Yeah, the wheels look a bit plastic-y for me. I'm a fan of the body mostly because I've never had a wrangler.
Understandable I just kind of feel like everybody makes Jeep bodies. I feel like a good set of wheels would change the look of the whole truck so maybe I'd be more into it after that!
I want one 😀😀😀😀😀😀😀😀😀
They're still available in local shops, although most online is sold out - more due in April 20th, 2020
@@TheRCNetwork thanks man, but i can't leave home i'm in quarantine in Spain 😪😭😭😨
Looks like a decent project I could get into. Q, I've heard you can fit a 550 motor in there with some trimming to the engine case, does it seem possible? I was thinking about the HW Axe 550 system. If so, will it be overkill to fit it with 2 speed?
I mounted a 540 motor last night...and there is room for a 550 (although I didn't test) . Everything will be tight, regardless because of the "motor" facade.
My AXE 550 did not fit - it was too long. I has to order the brushed motor/esc combo that comes with the RTR
Thank you for this review! I don't think this is the right truck for me.... it's TOO perfect, it's TOO nice! I would hate to ruin anything on it, and that would stop me from bashing the way I truly want to. Maybe I should take a second look at the cheaper RTR crawlers this spring, knowing how I feel about the much anticipated rig that is truly designed to be at the top of the game.
I'm starting to agree with you! It's almost too perfect!
Transmission looks freakin great. I hear they are working on the portal delete version of some sort and that’s the one thing I don’t like about the new truck.
Yeah, I'm sure Axial is listening.....many people want regular axles vs. Portals
I actually build one.... the headache it gave me makes me want to drive something else. Lol👍🏽🐒🇺🇸
This all new Axial SCX10lll or the Vanquish VS4-10 Ultra? 🤔 new to the scene
Vanquish is twice the price of have the money go vanquish.
Like TCN said - $369 vs about $1000 - and the same starting line for electronics, assembly and paint.
Rich in his head: *The thing is FCKN IMPOSSIBLE to screw in*
Rich speaking: You'll know what Im talking about XD
Exactly true! The front body mount (non JLU body mount) is a pain. There's 12mm CS screws and it takes forever to sink them and they creak like crazy
I can’t wait for the kit to come to the uk $500 babyee. Lol no, I’m not getting one at that price
Yeah, $369 here in the states. I'm sure the price will drop once distributors there get them
The RCNetwork not by much though
Your tires are on backwards. The tread is supposed to throw out debris, not bring it in. Crap,, never mind.. I thought the other end was the front. LOL My bad. BUT,, This post may serve others well, so I'll leave it here.
Like Dwight Schrute says: "False". The tires are not "directional - it doesn't matter which way you mount them.....they'll always be the same
Thanks Rich, the close look at this machine let me know it is not for me!
There's a lot going on in this one....I wish there was a "not so bells and whistle" version. I can do with out the 2 speed, Dig and portals, TBH
@@TheRCNetwork that is why I'm using a SCX10 transmission with a Hertz dig on a SC X10 2 raw Builders kit
If you have to tap holes I'm definitely not buying it. The TRX4 is so much better anyway.
I didn't have to tap them, although Horizon Hobbies/Axial recommends this. The Panhard mount/driver side shock tower is also an issue is you run a decent servo....it will end up breaking
Great video, but my OCD is going nuts with the subtle pauses when you're speaking. XD
Gee, thanks for the compliment
Just like the Capra, I won't be investing in a kit that requires a $50 servo to get missing parts...
That servo is 14 bucks...but yeah, I see your point. Would be nice of them to include the servo saver parts.
Yeah, like Revnine said, the servo is $14. But I'm with you, the servo saver items should all be in the kit regardless of which servo you use
Ok, at $14 that's very reasonable it's just the proprietary nature of not including it, thanx for the info guys!😁
Come on Axial. It's a Jeep aka MOPAR . No one in their right mind in the one to one world would put an LS into a Jeep . Infact the engine this rig comes with is a GEN3 Hemi. That is the molded engine that this kit should have. If it was a bronco put a molded cyotee or 351 an if it's GM then put that garbage LS or small block Chevy into it.
l
That kit is 500€ O_O OOF
$369 here in the US
@@TheRCNetwork Wow that sould be 338.82 even with 20% sales tax that sould be 406 €
holy EU tax O_O
Cool truck but that Manual sucks
It's much better than the Capra, but yes, still has a few bobbles