Wood Ambient - Piezo Contact Mic With Wood Block, Paper and Electronics

[@erosiondesertmusic]

Nice!👍👌

[@battleminion]

Amazing, I hope some day see how you build this

[@lawrencedolton]

Thanks for checking it out! It's a wood block with a piezo mic placed into a cutout on the underside. The piezo is wired to a 1/4" jack. Once a cable is plugged in, it's ready to go.

[@loveudon6972]

Sounds awesome 👍

[@lawrencedolton]

Thank you...😎

[@temporoboto]

💙💙

[@lawrencedolton]

Thank you, much appreciated...!!!

[@J1M0TEE]

Very nice! What's the paddle you're using made of?
I just received a MTM Mikrophonie kit to build, so I'm looking forward to making similar interactive sounds :) Is it a semi-hollow wooden box with the piezo mic stuck in the middle or something? Thanks for sharing!

[@lawrencedolton]

Thanks for checking it out! The paddle is a strip of standard foam board that has a thin veneer of paper on either side. This sound device is a solid piece of 2x8 redwood. I drilled a 2" hole in the bottom and attached a piezo mic about half-way up and centered. The jack comes out the end as you can see. I have done various box devices which you can see in some of my previous videos. Good luck w/ getting your interactive set up going!

[@rodrigodiaz6891]

Beautiful ! Is it an empty wood box? Or a large piece of solid wood?

[@lawrencedolton]

Thank you...!!! It's a piece of solid wood. I drilled a hole and channel about halfway through on the underside.

[@chuckcrunch1]

👀👻💀

[@lawrencedolton]

Many thanks...😎

[@bearshield7138]

far out