How to Remove Mower Deck John Deere Z335
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- How to remove and install the mower deck on a John Deere Z335E.
John Deere Z335E will not start. How to install a starter solenoid. • How to replace starter... .
How to start and operate a John Deere Z335E O turn riding lawn mower.
• How to operate a John ... .
Business Inquiries, please use contact page on my website; www.johnsonssm...
Thanks!
I bought an old Z235 (2014 with only 160 hours) with the same setup. Watching your video helped with the blade change as I’d not done this having only owned the mower for a short time. Appreciated!
I’m glad it was helpful and thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Took too long to find out how to replace the belt until I found this video. Thank you
I'm glad you found this video and hope all went well. Thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Excellent video, shows exactly what he is saying instead of just saying you need to do this and this but not showing the step. You make this job look really easy, thank you for sharing.
I'm glad it was helpful and thank you for the kind comment. I have done this procedure many, many times so I get fairly good at it! :) Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Don't take food from a skinny Chef, and don't take lawnmower advice from a mechanic with two hands. Thanks for the info dude. Helped a lot.
LOL:) I’m glad it was helpful! Thank you for watching and the kind comment.
Great video, I loved all the little tips and tricks and how you talked through the project like a real person not an instruction manual.
Im glad it was helpful and thank you for the kind comment!
Very instructive and thorough demo. I've pretty much owned and used John Deere lawn tractors and mowers all of my adult life ... Grand-dad was an old school farmer throughout the 30' thru the early 80s, and he bought everything JD, so I naturally followed I his footsteps. I used mowers from the old 110s, 112s, and moved up to the 210s-212s .... and finally to the 318s, and have 3 total bc I love that model so much ... snow removal etc. I love the power steering and hydraulics, but no🎉w I'm in town and mowing less, so purchased a ZTrack 345R a couple of seasons ago.
Basically, all decks hang pretty much under the power unit, but hookup is a little different from the steering wheel models to stick-steer. Your video certainly shows some pointers that make removal/hookup much easier! So thank you for offering it! I'm older now, with the back and hip issues that age often brings! Lol ... Thnx again, and Blessings to you. P.S. I did want to come back and make a suggestion ... After reinstalling the 42" deck on my Z345R, it occurred to me that I didn't mention that when re-installing the deck, I have a tapered Craftsman pry gar that I use as a drift pin/bar in aligning the lift arms, which makes that portion of re-installion much easier. Stay safe and well ..... Thanks again.
The John Deere 318 with the Onan engine and power steering was one of my most like machines that could do it all!! I'm glad my video helped you out! Thank you for sharing and the kind comment.
Going to do this today. Feel comfortable to do this and install my mulching kit because of you. Strong work!
Just take your time and you will be fine. Let me know how you make out! Thank you for watching and for commenting as it does help my channel grow!
A carpenter's clamp works great for holding the belt on the clutch while reinstalling the belt on the pulleys. Great job. Great video, as always.
Hi Dean, good tip. Thanks for sharing, watching and the kind comment.
Great instructional video for all of us non-mechanics. I wrestled with my deck to change blades and install the mulch kit … but now I know the better way to do this. I also appreciate the video on you channel for greasing the spindles. If it’s true the unit ships without grease, and there’s no prep, it’s no wonder those bearings wear prematurely.
Hi Michael, I’m glad my videos are helping you! Thank you for watching and the kind comment:)
Your video was very helpful. Watched it prior to removing the 54 inch Accel Deep deck from my Z515e ZTrak. While some of the pin locations and the lift mechanism were slightly different from those on the Z335 on your video it was close enough serve as a nice guide. The 3/8 drive extension to release the belt was very helpful. Hardest part, frankly, was moving the heavy 54 inch deck in and out after it was disconnected.
Excellent video with clear, easy to follow instructions.
Hi Mike, I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't yet and share my channel to help it grow. It would be greatly appreciated! Thank you for watching.
I learned so much watching this video I am so confident on removing my deck now thank you so much
Glad to hear! Just take your time and you will be fine!
Dude. Your my go to guy on my Z335. As I said in another post I just bought one with just under a 100 hours on it and it's like brand new. It was treated well. And also like I said going from my Craftsman 46 inch tractor style which I really liked, I love the Z335. And honestly the deck appears to be much easier to take off on the Z335 than it was on the Craftsman. I wish you had one of those tip things $42 or $5 or whatever, because I would donate. You've helped me tremendously over the last couple of weeks watching your videos on the Z335. I did get all the paperwork instructions and video on this mower, but right after I brought at home I had to take my truck to the shop to have some work done to it and I left that stuff in there. I just have a couple of questions and I was glad to see that 1 of the things is exactly the same on your mower. On the left side of the mower deck as you are sitting on the mower, there's a little tower with a bunch of holes in it. I thought maybe I was missing something, but yours is exactly the same way. What is that?. Also on the right side as you are sitting on the mower there is a handle that moves what looks kind of like a mulching thing. Initially that's what I thought it was but actually it doesn't close all the way, So I'm thinking that that is for when you drop your deck and hook the hose to it. And do the clean out. It looks like yours also has that same handle. One more question, do you recommend using the hose apparatus for the internet clean out?. Thank you so much for taking the time. 💪😎
The metal tab on the mower deck with the holes is a bump stop. It will not allow the mower deck to raise any higher if you over adjust the mower deck height. The second question, yes it is a mulching cover and if properly working should close off the side dish charge so you can mulch and open so it will let grass out when not mulching. The third question. I do not recommend using the wash port on the side of the mower deck or even washing your machine. If you want to keep your mower deck bearings from going bad, always keep the bearings fully greased and try never to wash your machine. Just use a hand held blower every time your finished mowing to keep debris from accumulating.
@@JohnsonsSmallEngines Thank you for all your help, and I did buy a leaf blower right after I bought the John Deere. Honestly, I don't know how I've lived without a leaf blower all these years!! Seriously!! I won't use water, I'll Jack it up and get into there and clean out underneath. There may be something obstructing the mulch sliding cover. Thank you so much for answering my questions and taking the time 💪👍😎
Keep them coming. Winter is here, and it's time to jump-start a new season. Never have seen those clips before I would have destroyed it.
Thanks Michael, I have only seen that clip on a few machines. Not at all popular.
Great video sir. About to service my z375R. I appreciate the thorough instructions.
I’m glad it was helpful and thank you for the kind comment.
I have this exact same mower and your video provided me with some much needed and detailed information. Thank you very much.
I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
Great instructions and good call on the tension bar idea. 👍🏻
Thank you! I’m glad it was helpful. Thank you for watching and the kind comment. Please give this video a like, subscribe if you would like to, and share my channel with your friends to help it grow! It would be greatly appreciated.
Thanks for posting. You are very good at creating these instructional videos.
I’m glad this was helpful and thank you for the kind comment! Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Thanks for getting me squared away. You rock man. I have same. I will be tuning in.
Hi Jim, I’m glad it was helpful. Thank you for the kind comment and for supporting my channel.
Just wanted to say I hope you and yours has a very Merry Christmas!
Thanks Steve, and yours as well!
Thanks so much! Using the 3/8" hole to release the spring is genius man! Here is an idea to share with you on that if you have not heard it from others. I followed your lead, but I bought a 3/8" to 1/2" adapter and just put that on my 3' breaker bar that is 1/2" drive. Works fantastic, is long enough to reach all the way out for easy access. Your pipe works great too, but I did not have one. Anyway, loved the video and made my first deck removal a piece of cake! Oh, one last suggestion. When the deck is free, I just release the back two wheels and roll the front wheels to the left (spin the mower left) and the deck come right out. No dragging the deck across the surface. Have a great day!
I’m glad this video is helpful and thank you for commenting. Please give this video a thumbs up and share my channel with your friends to help it grow. It would be greatly appreciated.
Thank you! I'm a one woman show and this video was great.
Hi Wendy, I’m glad you were able to your job done with a little help from my video.Thank you for watching and the kind comment:)
I was a fan until I saw the Little's sticker. 😅😅😅
Really good video. Thank you for the help. You obviously have a lot of skill.
Customers have to purchase their machines from somewhere. I just repair I don’t sell and not affiliated with them at all!! I’m glad this video is helpful and thank you for watching!
Thanks for the tip for the ratchet to relieve spring tension
I’m glad it was helpful! Thank you for watching and the kind comment.
Great video, you are very knowledgeable this will help me a lot. Thanks👍
Glad it was helpful!
Dang voice text, not the internet clean out with the underside clean out, man I need to really read this stuff before I send it LOL, thanks again.. 👍
Great walk through, thank you!
I’m glad it was helpful and thank you for the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for watching!
The back of my deck raises but the front is on the ground. What will cause that?
Guessing, clevis pin came out of a deck hanger? Take a look under while someone is sitting on the machine moving the deck up and down. I’m sure you will see something is wrong.
$2 to $5 tip/donation.. dang voice text... 😉👍 (it would add up) Thanks again!!
Merry Christmas and Happy New Year to you and your family from Jake and i at Eliminator Performance and many more to come.
Happy Holidays to you and your family!
This video empowered me! Thanks!
Hi Fred, You got this!!! Just take your time and you will be fine.
how do you make the dis to stay
Thank you. Great vid!
Im glad it was helpful and thank you for the kind comment!
Great video 👍thanks for information
I'm glad it was helpful. Thank you for watching and the kind comment!
Will the deck from a Z355E fit on the Z335E?
That is a question for John Deere
Excellent video!!
Hi Don,
I'm glad it was helpful and thank you for the kind comment!
👍🏾
Thanks William :)