Be advised, DS Lites are extremely frail, even if you put everything together exactly as it was, there's a really high chance that the console won't turn on even if it used to work just fine before the disassembly
I dont know if you still have this problem, but when i took it apart, i had the same problem. I removed the top cover again from the console, and slowly put it back on the console again, i think what might have happened is that maybe one of the parts that clips the cover in place isnt in correctly. Mess around with it untill it closes correctly then put the 4 screws back in place. Hope that helps
well i snap my black cable when tried to put back under the cartridge slot, I'm at the edge of my patience 😂, have to sell the ds now because i don't want to bother to fix it again
Video was good and helpful. However the ds lite is a pain, and I don’t think I’ll be tearing one down again. What a headache! Wanted to throw several times. The Wi-Fi cable was a nightmare kept getting stuck. The trigger springs omg! The ribbon cable going thru the slot and trying to plug back in. Wasn’t plugged in all the way and had to take apart a second time. My hands are too big lol.
How big is the Y1? I have the suggested 2.5 for the Wii breakdown. Thinking Nintendo uses the same size, I’m now attempting to replace buttons on DS as well as buttons and screen on GBA SP. this tri wing feels a bit large for handhelds lol. So I’m surfing amazon for a smaller tri wing.
Hi, I have a problem 🥲. Despite you said multiple times that the ribbing cable is fragile, of course i broke it...not all of it, it's just a bit "cut", but i guess the top screen won't work, so i wanted to ask you where could I buy a replacement at a good price, thank you very much
3:24 the black part of these connectors flip up and it makes it much easier to remove the cable
Someone in my family decided to crack some internal plastic in the hinge, but I was able to get it working again! Thanks!
Be advised, DS Lites are extremely frail, even if you put everything together exactly as it was, there's a really high chance that the console won't turn on even if it used to work just fine before the disassembly
The tri wing screws cant be removed on mine
still here 3 hours later, not sure why my case doesn't close flush
I dont know if you still have this problem, but when i took it apart, i had the same problem. I removed the top cover again from the console, and slowly put it back on the console again, i think what might have happened is that maybe one of the parts that clips the cover in place isnt in correctly. Mess around with it untill it closes correctly then put the 4 screws back in place. Hope that helps
@@EverythingOki yeah so the mother board wasn't flush also the mic cable was slightly off
Bruh I can’t get one of the screws out someone absolutely destroyed it now it has no bite
Try checking your volume to see if it's aligned.
well i snap my black cable when tried to put back under the cartridge slot, I'm at the edge of my patience 😂, have to sell the ds now because i don't want to bother to fix it again
0:52 for me it was the Y0
Good video, i just got bored putting ot back together. It was only $5 anyway
Video was good and helpful.
However the ds lite is a pain, and I don’t think I’ll be tearing one down again. What a headache! Wanted to throw several times. The Wi-Fi cable was a nightmare kept getting stuck. The trigger springs omg! The ribbon cable going thru the slot and trying to plug back in. Wasn’t plugged in all the way and had to take apart a second time. My hands are too big lol.
and this is so much easier to take apart than newer 3ds and 3ds xl, they have so many ribbon cables
The post where the trigger spring sits between broke on my ds lite any suggestions to fix it?
Cut and glue on a replacement piece of plastic
what do i do if a screw is worn and it doesn't want to come off? its happening to me with the battery cover
It depends on how much it is worn, try a bigger screwdriver and also try a rubber band on the peak
А заменить материнскую плату тяжело на новую с Алиэкспресс? Навыки работы(сборка/разборка) околонулевые.
The opening music sounds eerie, NTM a little depressing
How big is the Y1? I have the suggested 2.5 for the Wii breakdown. Thinking Nintendo uses the same size, I’m now attempting to replace buttons on DS as well as buttons and screen on GBA SP. this tri wing feels a bit large for handhelds lol. So I’m surfing amazon for a smaller tri wing.
Buy a repair kit, don’t look for them individually
It’s ok now. I have the proper tools.
I think my DS lite would look great if I just use a tooth brush on the shoulder buttons. Thanks for your video
I just need to clean the sides of the top part of ds. Can I just unscrew those 4 screws and slightly open it?
I don't think it's gonna work
Trims tutorialnyo ngaB ⭐⭐⭐⭐⭐
Hi, I have a problem 🥲. Despite you said multiple times that the ribbing cable is fragile, of course i broke it...not all of it, it's just a bit "cut", but i guess the top screen won't work, so i wanted to ask you where could I buy a replacement at a good price, thank you very much
Sorry to hear that... you should try on eBay or Amazon
Aliexpress seem to have them for cheap too