The mistake with paint are because you are laying to thick layer in the first coat. Next time make a “dust coat” in first layer, wait 5-10 min to its sticky, and then give it a solid layer. So you will get rid of the pinholes (air bubbles)
One more little detail that I want to point out, the air compressor should have all the water drained if possible because the water gets mixed with the paint and creates those pin holes after drying
Great vid as usual, some great advices in comments too. I would also point out that most of this stuff is caused simply by dust sticking to the paint - in real spray booth there is always a fan that sucks all the air up, so those particles do not land on painted elements. You have to make separate area for this, as much dust free as it can be. Painting in the open especially in reality of garage like Yours always gonna be difficult. Pozdro 👍
Don't even car about cars, but this guy's and friendship is what makes me watch this videos. This videos remind me that this is what life is about, friendship, building moments with friends.
You should make plastic windows for kevin, it would be easier to roll it down, you could cut it as you like it and it wouldnt break. (I mean the plastic that they use in rally cars and drift cars) :) have a good day guys
I was about to comment this, just make them out of plexiglass, then they can be cut to shape around the wheels and are also flexible, its like €30 for a 3mm sheet so not expensive either
also they could cut a few holes in it = better air circulation inside and they need it because bike has air-cooled engine i think and holes in windows look cool
Guys the window did not break becouse of chassis flexing (doors doesn't flex with chassis) but becouse of welding. You welded in the Kevin and windows like to explode like that into pieces becouse of radiation from welding especially exposed to low temperature. Know that from oldschooler. You should simply put a piece of cardboard on windows to protect against radiation. Keep on progress with Kevin. Great job!
(@nightride) first off, Bugi, never change. Keep up the good work Sam, setbacks happen, just know when they happen to me when I'm working on my cars, I watch a nightride video and don't feel so sad anymore.
The dirt spots on the plastic is called dirt inclusions, this usually happens if the panel isn't degreased properly, but a way to rectify this issue is just use a denibbing block that way you don't have to sand everything all over again hope this helps:)
When shit is hitting the fan the fact boogie can crack a joke like “I have baguette, I am France” is why this channel is amazing. You guys just continue to make it work. No matter what happens.
Its not half a day wasted if you learn how to stop it happening again... As ever, love watching NIGHTRIDE. If you don`t make the same mistake again, the learning time is NEVER wasted. ;-)
Subscribed to your channel almost for two weeks. Guys, you are making this world better. Very fun and useful at the same time. Greetings from Ukraine, Kyiv.
Love seeing the actual works of things and not just boom there’s a cool car we build it motivates me and many others to achieve there goals with there builds. Thank y’all for the great entertainment.
It happened to my '85 Nissan Sunny California too: the front right window just exploded one day, an hour before MOT inspection. I couldn't find a new estate window for a month, so i ran a sedan window which was slightly off in size, but nobody noticed it on MOT :'D good luck finding a new one
For them thats the nicest car they have. You have to remember you have the E30 thats a beater (like thats literally its nickname "winter beater") You have the Miata thats a nice version of a drift missile meaning it must ride as hard as a rock, it has 0 clearance, it sounds great and looks alright but has been hit, lost its bumpers repainted multiple times, and is nowhere near stock anymore. You have Kevin who is 100% for show now, and the Rolly if they ever would make a video about it lmao but even then that thing is also slammed with 0 suspension. This Sil80 is by far the most comprehensive build they've done and that's because they're trying to make it streetable, none of their other cars are really "streetable" at this point.
@@griffins750 nightride is becoming the european version of Mighty Car Mods. And i fucking love it! Ye. That does make sense. But as i remember the car was supposed be just quickly refreshed. And it turned into a way bigger project than anticipated
My brother has a Suzuki Every we love cruising in the little van Man “Kevin” is such a cool build! Aloha from Hawai’i love the channel one of the best on TH-cam !
Haven't checked it yet, but I'm excited already as I've seen the "teaser" pictures on Instagram! EDIT: 16 minutes later: This video is pure quality. And as Sam said, not everything goes always as planned and that's what makes these car projects perfect. Top quality content as always! Keep it up boys.
It's okay to make mistakes and it's great not to be afraid of showing 'em. Yesterday I spent half a day trynna change the rear brake pads (should be really easy thing) on my car without any success (the piston in the caliper is just stuck). Thanks guys for bringing such a vid to us, you're the best!
I think the glass broke because during the night it cooled down, due to thermal shrinkage the glass slipped between the card that held it and the door ;)
As far as the paint it’s one of three things 🎨 If you’re getting bubbles in the paint, it’s because the paint is off gassing and is built up to thick to expel the gases. Just need to do lighter coats. When I was watching the video I felt the first coat was really thick. You could use a half the amount of paint and would prob get better results. It could be debris from the surrounding area which means you need to separate it from debris getting in the air and landing in the paint. If it’s chunks of paint splatting your gun prob just needs to be cleaned before use. The tip was likely dirty. It could be one or a combination of multiple. Good on you for putting in the effort to redo it for the s13, it’ll show in the end. And sorry about Kevin! Sometimes bad things happen to good boys like Kevin 🙃 It’s just part of the journey!
Love from Australia Bois good luck with your window situation I love ur content its entertaining and the camera work is so nice u guys are such an inspiration to me your style and the stuff you do is the style I love
you put it on the ground in the corner of a huge shop, and then basically air dusted the corner with high pressure while painting, everything that was on the floor has now landed on your paint. a clean booth with one way ventilation is the solution. you can rig something up like last time.
Would u consider getting a Painting Booth? like a inflable one for small parts, u always painting something and inside the booth gonna be free dust :) Great video, I love seeing those small progress. Good luck with the glass for Kevin!
When prepping interior parts always use degreaser even when sanding since you never know how many times people used armerall or interior dressing. Right before painting get some isopropyl alcohol to clean them then turn down material on the spay gun and give them a dust coat. So you know your not getting fisheye in your plastic parts. Continue to dust paint on parts till they are covered then set your material to spray clear normal.
If you add some filtered positive ventilation to the shop you can really cut down on the amount of dust in there. You can DIY something together with a box fan and a furnace filter put into a hole in the wall.
nie maluj na podłodze! wiem że ładnie wyścieliłeś papierem ale jednak pęd powietrza który wydostaje się z pistoletu troche wznosi ten kurz dookoła i on właśnie później siada na mokre elementy. no i jak kolega niżej napisał, pierwsza warstwa to dosłownie zapyłka która przyczepia się do elementu i robi taki jakby ,,podkład" do bazy. z czystej ciekawości- jakim ciśnieniem malujesz ?
You're painting it on the floor, every time you pull the trigger its kicking dust up in the air and falling back down into the paint in-between coats. Imo put it on a stand 👍 I can't tell if its dirt nibs or solvent pop from the video, but it also could be that you didn't let the paint dry long enough in-between coats and got solvent pop which will look like little bubbles in the paint.
Watching Nightride honestly makes me feel like i'm a part of a family. Thanks guys.
damn this hits
same for me
Same here man
Wish I could be there and enjoy cars so much
Yeah they should do a patreon or so..
"Hello, people on the internet... " always hits different
The mistake with paint are because you are laying to thick layer in the first coat. Next time make a “dust coat” in first layer, wait 5-10 min to its sticky, and then give it a solid layer. So you will get rid of the pinholes (air bubbles)
give this man a beer. cheers!
Thanks mate, i had been having issues like that!
One more little detail that I want to point out, the air compressor should have all the water drained if possible because the water gets mixed with the paint and creates those pin holes after drying
Also guys need to make some ventilation inside garage. I'm even not talking about paint booth %)
Great vid as usual, some great advices in comments too. I would also point out that most of this stuff is caused simply by dust sticking to the paint - in real spray booth there is always a fan that sucks all the air up, so those particles do not land on painted elements. You have to make separate area for this, as much dust free as it can be. Painting in the open especially in reality of garage like Yours always gonna be difficult. Pozdro 👍
Bugi has such iconic quotes at this point💜
Safety is breaking your enjoyment😂
Bugi Number 1 always! 👑
good morning people of the internet🥸
Nearly bed time here haha
Good internet people of the morning
Don't even car about cars, but this guy's and friendship is what makes me watch this videos. This videos remind me that this is what life is about, friendship, building moments with friends.
went from watching kevin grow, to watching the s13 grow. i just hope this channel grows more.
much love and support to everyone at NIGHTRIDE ❤
i always get genuinely excited every time i see an upload from you guys, big love from Australia
You should make plastic windows for kevin, it would be easier to roll it down, you could cut it as you like it and it wouldnt break. (I mean the plastic that they use in rally cars and drift cars) :) have a good day guys
I was about to comment this, just make them out of plexiglass, then they can be cut to shape around the wheels and are also flexible, its like €30 for a 3mm sheet so not expensive either
also they could cut a few holes in it = better air circulation inside and they need it because bike has air-cooled engine i think and holes in windows look cool
only reason we don't want to do it is every time i see this it's always scratched and we want nice shiny glass there
@@NIGHTRIDEPL Use PPF on plastic windows ;)
plexiglass looks so bad even new.
It feels so weird to watch nightride without marek's good morning people on the internet
I love the relationship you guys have. I'd kill for a friend group like yours lmfao
Guys the window did not break becouse of chassis flexing (doors doesn't flex with chassis) but becouse of welding. You welded in the Kevin and windows like to explode like that into pieces becouse of radiation from welding especially exposed to low temperature. Know that from oldschooler. You should simply put a piece of cardboard on windows to protect against radiation. Keep on progress with Kevin. Great job!
(@nightride) first off, Bugi, never change.
Keep up the good work Sam, setbacks happen, just know when they happen to me when I'm working on my cars, I watch a nightride video and don't feel so sad anymore.
It’s nice watching you guys first thing in the morning when I wake up, and hearing good morning people of the Internet.
You guys rock. I can appreciate the fact that you want to make parts for the S13 as mint as possible!
This what makes the car community so strong. Everyone here is gold. Thanks @nightride
Bro theses dudes make me smile everytime I watch their videos Thanks nightride for the Good vibes
Nightride upload is just a HUGGGGGEEE mood boost for the day, love these guys and what they do
Don' t worry everyone make mistakes, especially in garage. It's normal. Next time would be better and the finally work is worth it. 😊
Honestly one of the best car content channels out rn
The dirt spots on the plastic is called dirt inclusions, this usually happens if the panel isn't degreased properly, but a way to rectify this issue is just use a denibbing block that way you don't have to sand everything all over again hope this helps:)
When shit is hitting the fan the fact boogie can crack a joke like “I have baguette, I am France” is why this channel is amazing. You guys just continue to make it work. No matter what happens.
You guys are brilliant at your work. I don't know how much people watch your videos from here, but great love from India mates, Cheers!
thanks bugi for explaining, something was not yes
You know why i like nightride ?!
Its always showing reality even when its not what we want to see
Unlike mooost of youtubers
Love you❤
Its not half a day wasted if you learn how to stop it happening again... As ever, love watching NIGHTRIDE. If you don`t make the same mistake again, the learning time is NEVER wasted. ;-)
i remember when i first started watching yall at 6k subs because of bugi and his e36, glad to see the gang is all together still
nightride is the only channel i love watching outside of the us, we love you guys !
Yesss you already know is gonna be good day when these guys post🔥
Is it just me or do these guys make the most engaging, high quality videos.
If you haven't already redone the plastics, consider wrapping them in the same fabric as the seats
Had my second coffee to this. Loved it as always!
Keep it up, greetings from Bulgaria!
Sunday morning with new Nightride video, can't get better than that
Subscribed to your channel almost for two weeks. Guys, you are making this world better. Very fun and useful at the same time. Greetings from Ukraine, Kyiv.
Love seeing the actual works of things and not just boom there’s a cool car we build it motivates me and many others to achieve there goals with there builds. Thank y’all for the great entertainment.
@OFFICIALNIGHTRIDE- how would I contact y’all?
amazing as always! My favorite part is when the S13 started!
Your not sad again... its splash Gang 😼
Thank you for making my day better. Even if not everything was going according to plan ;)
Plexiglass for Kebins windows, you can cut them to fit in the shortened doors too....Loving all the builds by the way!
It happened to my '85 Nissan Sunny California too: the front right window just exploded one day, an hour before MOT inspection. I couldn't find a new estate window for a month, so i ran a sedan window which was slightly off in size, but nobody noticed it on MOT :'D good luck finding a new one
NightRide is the best car youtube channel, makes you feel apart of the garage :)
Can not describe the vibes in each of your videos but damn it is such a pleasure to watch and such inspiration every time! 🤘🏻 chears from France
Editing, camera work, quality of building, and hilarity all have improved sooooo much!!
‘You’re not sad again…are you splash king?’
Man all I see here, is a family, and I'm happy to be a part of it!!! Much love
There are many amazing channels with car content but Nightride just has the best vibe
These type of videos definitely show me what real friends and real life is like, keep up the amazing content ✌️💨
after a hard night at work // and more mistakes in projects here ... 12:30 minutes of chill needed
Remember how the S13 was supposed to be “just an easy street build, nothing too much”? 😅 it’s perfect!
For them thats the nicest car they have. You have to remember you have the E30 thats a beater (like thats literally its nickname "winter beater") You have the Miata thats a nice version of a drift missile meaning it must ride as hard as a rock, it has 0 clearance, it sounds great and looks alright but has been hit, lost its bumpers repainted multiple times, and is nowhere near stock anymore. You have Kevin who is 100% for show now, and the Rolly if they ever would make a video about it lmao but even then that thing is also slammed with 0 suspension. This Sil80 is by far the most comprehensive build they've done and that's because they're trying to make it streetable, none of their other cars are really "streetable" at this point.
@@griffins750 nightride is becoming the european version of Mighty Car Mods. And i fucking love it! Ye. That does make sense. But as i remember the car was supposed be just quickly refreshed. And it turned into a way bigger project than anticipated
best car youtubers fr
My brother has a Suzuki Every we love cruising in the little van
Man “Kevin” is such a cool build!
Aloha from Hawai’i love the channel one of the best on TH-cam !
it was nice to see this. I was out in the garage today and I feel one forward and two six late. It's good to know there are others. 🖤
Haven't checked it yet, but I'm excited already as I've seen the "teaser" pictures on Instagram!
EDIT: 16 minutes later: This video is pure quality. And as Sam said, not everything goes always as planned and that's what makes these car projects perfect. Top quality content as always! Keep it up boys.
Holy shit. I haven’t looked at your sub count in about half a year. Almost 700k. Absolutely exploding congratulations guys
Love the music on this episode, so sick
top tier uploads as usual 🤩
lmfao that laugh was the best laugh ive ever heard on nightride
edit: bugi should say goodbye at the end of every episode
It's okay to make mistakes and it's great not to be afraid of showing 'em. Yesterday I spent half a day trynna change the rear brake pads (should be really easy thing) on my car without any success (the piston in the caliper is just stuck). Thanks guys for bringing such a vid to us, you're the best!
Great work boys.
Remember there is a lesson in every mistake. So take that out of this.
Greetings from 🇿🇦
its the best life when you eatin a milo ice cream while watching a new nightride video
this dude is living my dream, thx for ur videos, keep goin bro ✌
It's like I'm in the garage with the boys. Love this channel ❤
😂 jus two boiz standing there twisting their columns. Unintentionally too funny 🤙 let’s go man. Boogie killin it
I don't know about the looks irl but on camera those dust particles look kinda cool actually
I think the glass broke because during the night it cooled down, due to thermal shrinkage the glass slipped between the card that held it and the door ;)
The s13 gonna be fireeee🔥🔥🔥
Your videos are so chill to watch.
the videos are just so chill the editing makes them perfect
I love the videos , can always relate .. it's hard to understand this lifestyle for the outside people.
Everything happened, because Marek hasn't said "Good morning people on the internet". Everything happens for a reason! Love you guys
Buggi eat baguette so French community now love Buggi !
Love on buggi ❤
As far as the paint it’s one of three things 🎨
If you’re getting bubbles in the paint, it’s because the paint is off gassing and is built up to thick to expel the gases. Just need to do lighter coats. When I was watching the video I felt the first coat was really thick. You could use a half the amount of paint and would prob get better results.
It could be debris from the surrounding area which means you need to separate it from debris getting in the air and landing in the paint.
If it’s chunks of paint splatting your gun prob just needs to be cleaned before use. The tip was likely dirty.
It could be one or a combination of multiple. Good on you for putting in the effort to redo it for the s13, it’ll show in the end. And sorry about Kevin! Sometimes bad things happen to good boys like Kevin 🙃 It’s just part of the journey!
my man there's nothing to make something not perfect, at least you're getting some experience. keep up and cheers from here my man.
Just randomly searched nightride and voila 🔥
Love from Australia Bois good luck with your window situation I love ur content its entertaining and the camera work is so nice u guys are such an inspiration to me your style and the stuff you do is the style I love
Yo, you maybe can try to wet sand the paint on the interior trim to remove the dust particles and polish it after.
Before getting rid of it.
Vibes no matter what the content are alway awesome.. always make me want to work on my shitboxes with the hommies
I love how Sam is just casually wearing an Audi hoodie 🥲
CLOSE TO 700K!!
I cant wait until the s13 will be ready🔥
you put it on the ground in the corner of a huge shop, and then basically air dusted the corner with high pressure while painting, everything that was on the floor has now landed on your paint. a clean booth with one way ventilation is the solution. you can rig something up like last time.
There are no mistakes, only happy accidents
So much work is put into these videos, They're great!
Hello from Newfoundland. Ride low and go fast!
Why these videos feel so welcoming
Love you guys from New Zealand ❤
good morning people on ze internet
This feels like it was yesterday
Big up the instrumental!
Would u consider getting a Painting Booth? like a inflable one for small parts, u always painting something and inside the booth gonna be free dust :) Great video, I love seeing those small progress. Good luck with the glass for Kevin!
When prepping interior parts always use degreaser even when sanding since you never know how many times people used armerall or interior dressing. Right before painting get some isopropyl alcohol to clean them then turn down material on the spay gun and give them a dust coat. So you know your not getting fisheye in your plastic parts. Continue to dust paint on parts till they are covered then set your material to spray clear normal.
If you add some filtered positive ventilation to the shop you can really cut down on the amount of dust in there. You can DIY something together with a box fan and a furnace filter put into a hole in the wall.
Best car channel right now easily
4:10 in order for this to not happen again you'll probably have to adjust and bend the door untill it fits the new window perfectly
title got me teary eyed
Support comment from Guam 🇬🇺
Imo if you paint the parts in the same color as the engine bay it will look cooler and it will match the car even more try it out
Sometimes happen, that is the reality. I think if you need to repaint, a lighter purple maybe could fit with that S13 lime green. 😁
nie maluj na podłodze! wiem że ładnie wyścieliłeś papierem ale jednak pęd powietrza który wydostaje się z pistoletu troche wznosi ten kurz dookoła i on właśnie później siada na mokre elementy. no i jak kolega niżej napisał, pierwsza warstwa to dosłownie zapyłka która przyczepia się do elementu i robi taki jakby ,,podkład" do bazy. z czystej ciekawości- jakim ciśnieniem malujesz ?
You're painting it on the floor, every time you pull the trigger its kicking dust up in the air and falling back down into the paint in-between coats. Imo put it on a stand 👍
I can't tell if its dirt nibs or solvent pop from the video, but it also could be that you didn't let the paint dry long enough in-between coats and got solvent pop which will look like little bubbles in the paint.
0:28 Nice poster in the back!
they re Marek's 'people on the internet'.