Also a nice Photo in the back ground ;) Queen Fan ? , collecting miniatures myself ( just bought a McLaren MP4/2 (portugese gp version ) of Alain Prost (still need to put the Marlboro stickers on) , but my favorite car i have is the Exotto Long Beach version of the Ferrrari 312T4 of Gilles Villeneuve
It was the McLaren mp4-4 that was the Brabham's clone! The Brabham was co-designed by Gordon Murray for the 1986 season, and then Murray moved to McLaren and used the same ideas to co-design the McLaren.
I just started collecting 1/24 because the quality is not bad and I can get them sometimes below $40 USD and I can display more of them on my desk. I had a whole 12 car display case of Schumacher era 1/18 cars with The groove tire cars (Jordan Fissichela, Jaguar Irvine, Arrows Verstapen, Montoya Williams BMW, Raikonen McLaren, and a few 1970s Tyrells like Stewart and Cevert, and the Senna Mclarens which I added the Marlboro decals too. I gifted these to my friend's kid but he ended up storing them. I think 1/18 scale cars were way cheaper back then and the quality was not Spark level but not terrible. I also started collecting 1/18 RWB Porsche 993 and 964 and recent 911 GT3 RS. I place my two favorites of the week under my dual screen monitors for work
Awesome collection! These IKEA Detolf cabinets are the best way to display 1:18 cars The Sauber C37 is one of my favorites! It’s insanely hard to find any Leclerc Sauber air this point regardless of scale and manufacturer 😅
Well the Detolf cases were the best way to display the older style 1:18 cars, the bases on the new Spark models are bigger, thus they don't fit! Hence why they aren't in the display (forgot to mention it in the video)
@@JurianHamstra I display mine in IKEA Bertby cabinets, but I recently got the Minichamps MCL35 and MCL35M and the cars are too long to fit in there now too. 🙁
Storing the boxes is the struggle we all share lol. Are the new Spark boxes able to fold flat at all? And how stackable are the cases? My display case is currently full but I'm planning to accommodate the Spark models I have on pre-order by stacking them beneath the models that don't have cases.
New Spark boxes are hard as a rock, can't fold them at all. Cases are fairly stackable since the case stays the exact same width and length as the base (It doesn't narrow). Although I would trust stacking too many on top of each other since there are no edges to keep them in place.
I like the IKEA display cases, but the shelves have too large a spacing between them. Far too much wasted space for me. I have only about 30 Tecnomodel & BBR Ferrari's still in their original cases. It's not ideal but they're stacked on top of each other. Most of my collection is 1/43 scale are in wall cases (about 1600 models in all). Ideally need a bigger house!
Love the Queen poster on the wall. Very cool
Awesome collection! Love the Queen poster in the back ground too 🤘
This truly an impressive collection, very nice. I'm with you when it comes to the boxes and the helmet, there so damn pricey
Damn i see my collection is much closer to being "amazing" than i thought:D made me feel better:p nice vid mate
You can make a Collection as crazy as you want! (as long as your wife allows it hahah)
Nice collection, you should have showed us the entire light up display you have!
Great collection! Thank you very much😊
Also a nice Photo in the back ground ;) Queen Fan ? , collecting miniatures myself ( just bought a McLaren MP4/2 (portugese gp version ) of Alain Prost (still need to put the Marlboro stickers on) , but my favorite car i have is the Exotto Long Beach version of the Ferrrari 312T4 of Gilles Villeneuve
Really nice collection jurian! As always a beautiful video! Cheers from Italy 🍻🍻
Your channel is so underrated!!
Btw,how much did all of that cost you?
Fantastic collection my Brtother! Alex by Brazil,
It was the McLaren mp4-4 that was the Brabham's clone! The Brabham was co-designed by Gordon Murray for the 1986 season, and then Murray moved to McLaren and used the same ideas to co-design the McLaren.
Very impressive collection, bravo! I know quite well what an effort it takes to maintain a collection like that!😅
1:51 I don’t think George drove the w11😭
He did drove w11...he replaced lewis as lewis was tested positive covid 19
I don't watch Formula 1 but awesome collection Jurian!
You're missing out
I just started collecting 1/24 because the quality is not bad and I can get them sometimes below $40 USD and I can display more of them on my desk. I had a whole 12 car display case of Schumacher era 1/18 cars with The groove tire cars (Jordan Fissichela, Jaguar Irvine, Arrows Verstapen, Montoya Williams BMW, Raikonen McLaren, and a few 1970s Tyrells like Stewart and Cevert, and the Senna Mclarens which I added the Marlboro decals too. I gifted these to my friend's kid but he ended up storing them. I think 1/18 scale cars were way cheaper back then and the quality was not Spark level but not terrible. I also started collecting 1/18 RWB Porsche 993 and 964 and recent 911 GT3 RS. I place my two favorites of the week under my dual screen monitors for work
I know the pain of storing all the boxes lol... Our storage under the staircase is full of my 1/43 boxes and my wife doesn't like it one bit :D
Treat her to a nice dinner next weekend to keep her satisfied so you can buy more cars
Awesome collection!
These IKEA Detolf cabinets are the best way to display 1:18 cars
The Sauber C37 is one of my favorites!
It’s insanely hard to find any Leclerc Sauber air this point regardless of scale and manufacturer 😅
Well the Detolf cases were the best way to display the older style 1:18 cars, the bases on the new Spark models are bigger, thus they don't fit! Hence why they aren't in the display (forgot to mention it in the video)
@@JurianHamstra I display mine in IKEA Bertby cabinets, but I recently got the Minichamps MCL35 and MCL35M and the cars are too long to fit in there now too. 🙁
I've got 3 IKEA billy bookshelves with glass doors, looks pretty good with my 1/18 & 1/43 cars, probably cheaper?
Storing the boxes is the struggle we all share lol. Are the new Spark boxes able to fold flat at all? And how stackable are the cases? My display case is currently full but I'm planning to accommodate the Spark models I have on pre-order by stacking them beneath the models that don't have cases.
New Spark boxes are hard as a rock, can't fold them at all. Cases are fairly stackable since the case stays the exact same width and length as the base (It doesn't narrow). Although I would trust stacking too many on top of each other since there are no edges to keep them in place.
@JurianHamstra Hopefully somebody comes up with some kind of wedges to attach to the corners. Thanks for the info mate!
die RB in Arigato wit.. blijft 1 van de mooiste F1 auto's allertijde.
Liked 👍 Thanks
Awesome collection
Ferrari should bring back the Ferrari red for better luck
Which display case do you use for 1/18 spark models which came without case?
Where do you get these from
what do you have against Williams?
I like the IKEA display cases, but the shelves have too large a spacing between them. Far too much wasted space for me. I have only about 30 Tecnomodel & BBR Ferrari's still in their original cases. It's not ideal but they're stacked on top of each other. Most of my collection is 1/43 scale are in wall cases (about 1600 models in all). Ideally need a bigger house!
amazing!!
where did you get them from?
Most of them from Raceland.de I highly suggest them
Just look on the bottom/under body and it will tell you the manufacture.
I am from india
I am not able to find red bull f1 rb19 Max in India
Can you suggest any site which ship to india
❤❤❤
I know you review car models James Hunt McLaren 1976
If I was to ever rob a house it would be yours.
Why you are not collection minichamps 1/18, because all your video review ara made by spark only i think😊
Spark releases most of the cars sooner and in my opinion they're better quality too.
Can I have the 2021 haas and red bull please for £0?
Can I have the 2021 mclaren please for £0?
Can I have the Charles leclerc ferrari s please for £0?
Could you stop that... for 0£ ... please
@@manuelmayr8831 shut up now
Nice...but not amazing!!!
"Actually, actually actually... actually..." You must stop that man.