Product Spotlight: Toyota Landcruiser 100 Series Upper Control Arms by Nitro Gear & Axle

The end-all 4-season UCA! Finally Upper Control Arms that allow you to run longer shocks for more travel, correct caster, and without squeaks!
• The arms are 100% BOLT-ON
• Heavy Duty Grease-able Sealed ball joint offers higher misalignment than OEM, and lasts much longer than uniball type arms, and no squeaks!
• Removable Billet ball joint Top Cap
• OEM style Rubber bushings for lower maintenance, quieter, less vibration and no squeaks!
• Heavy wall tubular design provides more strength versus the flimsy OEM stamped steel arms.
• Lower profile than OE, thus providing additional clearance for larger tires, and/or larger/ longer shocks.
• 3 Degrees additional caster.
• Also work well on stock height vehicles.
1998-2007 Toyota 100 Series Land Cruiser: www.nitro-gear.com/Land-Cruis...
Visit Us On The Web:
www.nitro-gear.com
Email Direct:
[e-mail]
📷Like us on Instagram!
NitroGears
#NitroGears // #NitroRegeared

[@nathanrotar5012]

It's only been a day since install and alignment, but what a huge difference! My last setup was a pain to get it aligned properly and could not hold up to my offroad use. I will update after I have used your product for a while, but so far so good.

[@SteveBurns80]

Good to see someone that finally understands IFS 100 and putting out the correct info.👍
So many people/ pros here in Aus get it wrong when lifting the front of the 100.
Very common to see 50+mm lifts without long enough shocks. Must keep around 70mm minimum droop or it usually ends badly.
And yes OME shocks are same as factory length so no way can they handle more than 1" lift. They're are also very poor at controlling a HD spring rates on heavy Cruisers. Yet, ARB sell them as a 2" lift kit. Pfff.

[@NitroGear]

Well said

[@alexatwagan]

This is just what the doctor ordered! Thank you for a very informative video!

[@NitroGear]

Glad it was helpful!

[@JohnGarcia-dx4gg]

I need your experience on a Different rebuild also need to buy the parts from you guys. I also want to lift it and want to use The Nitro System.

[@fuzzyco3]

I would like to install the same setup on 2000 LC, What is the part number on the Icon shocks. I have an OME lift. I also have an ARB front bumper. Thanks.

[@erwinmelendez4238]

excellent has a page to order piesas greetings from the dominican republic

[@REMYLEONEL]

Can i put a oem ball join on does ?

[@julijancernic1571]

Hello, is this kit available to buy in Europe?

[@sensidion]

I bought my Nitro UCAs in 2016, so those had the Uni joint ? When did Nitro upgrade the ball joint ??

[@NitroGear]

2019 I believe. Send me an email if you're interested in swapping to Ball-Joint style, we can give you a price break to make the upgrade happen. [e-mail]

[@nathanrotar5012]

What If I want to keep the ahc?

[@escapeartist7756]

You ever make this upgrade? I have AHC as well ... just wondering if anyone has done it.

[@blackwolf3414]

👍👍💯💯