Thank you for your steady teaching of all the subject matter that we all need to learn at some point in this lovely hobby. You take our fear away to bring us along.
Nice, showing off the vario working too! Internally the Vairo updates over 10x per second. To get a faster update rate at the handset, increase the TLM Ratio to give it more bandwidth for updates. 100Hz 1:8 updates 5x a second, 333Hz 1:32 updates 4x a second, and the ratio can increase/decrease from there.
Nice!! thank you very much for all these informations, I am new in this hobby, and all these videos are very useful for me (and sure other begginers) Good job Andrew, Muchas gracias Rob
If Radiomaster made these available in 433MHz then people who have been hanging on to systems such as Dragonlink and EzUHF would buy them like hotcakes.
@@dwaynebrown7220 I have a set (or a few) 433MHz TTGO v1/v2, 915MHz another set of TTGO v2 these are about 50mw but some appear to be weaker than others. One is showing around 28mw which is not ideal, but fine for bench-work and testing. Then in 2.4GHz land the BETAFPV Micro TX which is up to 1W and hit 18km range in surface tests and over 60km without failsafe in an elevated tests. (Note: 62km was as far as the geography would allow me to go, the same setup under similar conditions would get much further, likely 70-100km before failsafe.) I’ve used Dragonlink and EzUHF in the past, both systems are far less forgiving when it comes to your build and other devices. Each time you set them up on a platform for use at range it was a science experiment in chasing down and eliminating noise. I’d like to get a nice COTS 915MHz TX, but to be honest the 2.4GHz is quite sufficient for any model flying I’d actually do.
They need to add VBATT....not share it with RX voltage. Two different things.....On a Crossfire RX it switches between both. Very annoying TBH....🤔😳....Good job Andrew....
Hello, thank you very much I imagine that one of them will work for me bixler or tundra by the way I did not tell you I already have a radiomaster tx16s greetings and thanks
Excellent review Andrew. Excuse my ignorance but do they make for/will these work on 4 in 1 ( I have TX16s mkii ) the price for the vario version here in the uk is about 1/3 the price of FRSky version
Thanks to both of you, I did assumed that but hoped there might be some trickery around it! Still don't understand the difference between ELRS and 4 in 1! More utube to watch I guess. Thanks
Andrew, Spartan you two mean the ELRS Ranger “series” so including the nano and micro ones? I cant find any Tx info on the Radiomaster site to confirm this. Thanks. Laurie NZ.
Hi Andrew, I am looking to buy Radiomaster Pocket (ELRS / LBT) version just to confirm, will Radiomaster ER6 receiver will work with it? Second question: I wanted to work with Speedybee Mini FC in future build for that I have RP3 V2 ExpressLRS 2.4ghz Nano Receiver in mind. Is this a good combination to work with. This setup would be for fixed wings.
Yes the ER6 and RP3 will work if you flash them with the EU firmware. SB F405 WING Mini and RP3 is an excellent combo. But be aware that the Mini is a quad board, you want the WING Mini.
@AndrewNewton so the transmitter and receiver should have the same firmware in order to work properly right. I can google how to update the firmware on both the hardware. I will buy speedybee wind mini. Thanks
Me I don’t know but each time I see a video or any information about ELRS they say it made specific for fix wing drones this or that They never mentioned helicopters so I was wondering. And I see that I made some spelling errors in my previous comment 🙂
Thank you for your steady teaching of all the subject matter that we all need to learn at some point in this lovely hobby. You take our fear away to bring us along.
You are very welcome
Nice to see ELRS getting more and nicer PWM receivers. Also,Andrew Newton, still making the best "Subscribe" messages on TH-cam!
Thanks, they are fun to make
Nice, showing off the vario working too! Internally the Vairo updates over 10x per second. To get a faster update rate at the handset, increase the TLM Ratio to give it more bandwidth for updates. 100Hz 1:8 updates 5x a second, 333Hz 1:32 updates 4x a second, and the ratio can increase/decrease from there.
Many thanks Captain, very helpful information.
Nice!! thank you very much for all these informations, I am new in this hobby, and all these videos are very useful for me (and sure other begginers)
Good job Andrew,
Muchas gracias
Rob
Glad to help!
If Radiomaster made these available in 433MHz then people who have been hanging on to systems such as Dragonlink and EzUHF would buy them like hotcakes.
I doubt they even consider that market
There are ExpressLRS options (both TX and RX) in 433MHz, 868/915MHz and 2.4GHz.
People hanging onto Dragonlink and EzUHF are living in the past.
Any links to ExpressLRS 433MHz?
@@crobnz what are you using?
@@dwaynebrown7220 I have a set (or a few) 433MHz TTGO v1/v2, 915MHz another set of TTGO v2 these are about 50mw but some appear to be weaker than others. One is showing around 28mw which is not ideal, but fine for bench-work and testing.
Then in 2.4GHz land the BETAFPV Micro TX which is up to 1W and hit 18km range in surface tests and over 60km without failsafe in an elevated tests. (Note: 62km was as far as the geography would allow me to go, the same setup under similar conditions would get much further, likely 70-100km before failsafe.)
I’ve used Dragonlink and EzUHF in the past, both systems are far less forgiving when it comes to your build and other devices. Each time you set them up on a platform for use at range it was a science experiment in chasing down and eliminating noise.
I’d like to get a nice COTS 915MHz TX, but to be honest the 2.4GHz is quite sufficient for any model flying I’d actually do.
Informative video as always. 🙂
Glad it was helpful!
They need to add VBATT....not share it with RX voltage. Two different things.....On a Crossfire RX it switches between both. Very annoying TBH....🤔😳....Good job Andrew....
Sorry, I do not understand the problem/question/issue, ..I am a begginer, could someone explain it me in detail? Thanks in advance!!!!
Do you think that the telemetry will include barometer or GPS for altitude and airspeed measurements?
GPS, vario and current sensors I hear
Hi Andrew, love your channel. Can any of the receivers be set up to output sbus?
Unfortunately not. PWM only
Hello, thank you very much I imagine that one of them will work for me bixler or tundra by the way I did not tell you I already have a radiomaster tx16s greetings and thanks
question, this er4 receiver can connect to a esc ,so where does the esc connect ?
ESC can be on any channel. I use Ch3 usually.
Excellent review Andrew. Excuse my ignorance but do they make for/will these work on 4 in 1 ( I have TX16s mkii ) the price for the vario version here in the uk is about 1/3 the price of FRSky version
These require a reasonable priced JR bay module $39 for the Radio Master one.
As Spartan says, you would need to insert an ELRS module in the JR bay. Like the Radiomaster Ranger module
Thanks to both of you, I did assumed that but hoped there might be some trickery around it! Still don't understand the difference between ELRS and 4 in 1! More utube to watch I guess. Thanks
Andrew, Spartan you two mean the ELRS Ranger “series” so including the nano and micro ones? I cant find any Tx info on the Radiomaster site to confirm this. Thanks. Laurie NZ.
@@LWJCarroll Correct. They are all compatible, as are any other ELRS modules / radios / receivers
question: how do you couple two ER8 or ER6 receivers for a dual redundancy setup ?
Can get extra channels from 2 receivers but not redundancy as far as I know
Hello there Andrew! Longtime watcher. i do miss the 'ole garage.... Do you know when these will be available to the public?
Me too, it was a luxury. Links are live now
Great video, thank you Andrew!!!
I have a radiomaster boxer CC2500, can these receivers work on this radio?
You would need to add the external ELRS RF module. Ranger Micro ELRS Module - bit.ly/3O5O90S
@@AndrewNewton TKS!!!
Hi Andrew, I am looking to buy Radiomaster Pocket (ELRS / LBT) version just to confirm, will Radiomaster ER6 receiver will work with it? Second question: I wanted to work with Speedybee Mini FC in future build for that I have RP3 V2 ExpressLRS 2.4ghz Nano Receiver in mind. Is this a good combination to work with. This setup would be for fixed wings.
Yes the ER6 and RP3 will work if you flash them with the EU firmware. SB F405 WING Mini and RP3 is an excellent combo. But be aware that the Mini is a quad board, you want the WING Mini.
@AndrewNewton so the transmitter and receiver should have the same firmware in order to work properly right. I can google how to update the firmware on both the hardware.
I will buy speedybee wind mini. Thanks
Yes both must have the same firmware. This is the easiest method th-cam.com/video/8poK--ln5J0/w-d-xo.html Choose the "Regulatory domain EU"
very cool.
Can these receiver work with RC helicopter ? Each time I see a video, it only say planes drones cars but never helis so it made wonder
Same as any other PWM receiver. Is there anything special required by helis?
Me I don’t know but each time I see a video or any information about ELRS they say it made specific for fix wing drones this or that
They never mentioned helicopters so I was wondering.
And I see that I made some spelling errors in my previous comment 🙂
Why RADIO MASTER ER SERIES NEED TO FLASH??WHAT ISTHE REASON WHY ARE SOME DOING IT.
Probably just showing how to use the dongle. No need to update as far as I know
@@AndrewNewton haha.thank you sir.
🌹 Promo*SM