Thanks for the video. I am a newb and my girlfriend damaged the front and needed to replace my bumper, fender, and headlights. I will be doing this and following your very helpful video. People on the forums say you cant adjust the rhd inspire properly. You made me a believer. Thanks again
@@reinaldonavarro3800 The price has actually gone down quite a lot in recent years. Back in 2013-14 a set used to run for $800 or more for the lights alone with no bulbs compared to around $300 today. The reason why it's still expensive is because they come from a car that was never sold in the USA, so they're still pretty rare and much harder for sellers to source them.
That accord really coming along! LOVE YOUR VIDS!! I've got a 7.5 Gen and building my own headlights as the inspires are a bit too pricey. I'm getting a used set of oem's putting in a sequential led strip and retro fitting 2.5 projectors. I'll be making a series on my other channel. Accord authority.
Where did you get the inspire lenses? Are they OEM JDM honda? I thought i saw a honda stamp on the back. Did your car come with HID before or were the HID ballasts in the inspire? This looks sick! Thanks for posting.
Yes, they are OEM JDM. I got the headlights from ebay and the bulbs from Amazon Japan. I have a link to a google doc in the description, but there's an adapter cable for $10 that allows you to plug the HID ballasts into the stock connector.
i have to say i really like this mod, i was a bit curious about the wiring gauge used and if I were to make the wiring setup myself is it optional to run a 7443 socket for the turn signal than the 7440 socket?
I used 16 gauge wire at the time, and I'm pretty sure you can use 7443 as long as you can make the socket fit inside the housing. I used a dremel on my old 9005 LED low beam bulbs so they would fit in the 9006 socket for the Inspire high beam.
Love the uc1 conversion now all you really need is side mirrors and front end conversion (hood fender bumper), need to slam this thing already I got a 7th gen too, not going the uc1 route though
Here in Ohio it's legal to use white turn signals. So I matched up my Auxbeam LED Hi/Lo to my Parking/Turn signals. It looks freakin good. Now my friends are doing the same thing :) Oh yeah, I have a 02' Accord.
been trying to find these headlight assembly; i hope i could hook it up nicely as you; nice video, i have the projectors on my Gen7 now but will be upgrading again lol. good luck with eveything from NYC
Pura vida desde Costa Rica 🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷yo tengo también un Honda accord 2004 y le estoy haciendo muchas modificaciones inclusive otros focos y franki ....Coooool
Hey you should do a courtesy light upgrade for the back doors the inspire has them but the top trim models , U S accords has red reflectors and none ever received the back courtesy lights. The hole is there for adding one...
Greetings friend, I liked the whole video but I have a question. I want to install the headlights but they only work with HID lights? Because right now I am using the factory headlights but with LED lights and they are super bright and illuminate well all the road.
Yes the low beams in these are D2S which are only available as HID since they use a ballast to power the bulbs. I used to have LED in my stock headlights as well, but these are brighter plus they don't blind oncoming traffic
@@MrCutlash I didn't have any issues with them when I had this car. I just had to aim the left side low enough that it wouldn't blind oncoming drivers. On country roads with no street lights oncoming traffic would flash back at me occasionally but in cities it's fine.
The problem ain’t hid o led. Is that the last housing was made for hologen. I want this but 300 to 500 is tooo much. I’m put switch backs on my then keep waiting until I finish my car. To get the extra stuff like the rear lip and this .
Do the city lights end up only turning on if parking lights or headlights are on? Just wondering cause my Accord has stock DRL's through the high beam bulbs.
Yes they only come on with the parking and low beams. You can probably look up how to disable the high beam DRL if you don't want it or do some other wiring setup
dear I thank you for your special installation of headlights I also have the same model, but I need your help. How to order these pieces from any website? Thank you
Hi bro.. first of all thank you for making this video.. it so amazing for us.. I have an accord 2005 which already come up with inspire headlight. Can the low beam which has d2s bulbs change to led d2s? Is it only fit for d2s bulbs? Thank you broo...
I installed an LED turn signal relay which goes above the drivers footwell. Resistors make LEDs use as much power as a stock bulb, but with the relay they don't hyperflash and still save battery power. You can find this by looking up "LM526 LED Flasher Relay"
@@MiguelLopez-wi5nm Those are in the description, I got them off Amazon Japan. You can click on the Japanese flag icon at the top of the website or in the side menu to change the language to English. It had free shipping at the time I ordered them and I believe they still do.
Hey man . Note..I have a 06 accord. And it has daytimerunning light but its on the high beam. Its going to look different from yours..you suggest unplug the highbean since we dont use it?
The bulbs in the description will work as turn signals for the rear, for stock headlights you need 9006 LED low beam and 9005 for high beam. The other bulbs will only work on Inspire headlights
I just did a basic drawing but there's not really a full diagram. The plug for the DRL and Turn Signal has 3 wires on the stock harness. The middle wire is ground, and the outer 2 are each power with 1 being for one bulb and 1 for the other. You just need to split the harness, run the ground wire to both, and each respective power to the correct bulb (can check which one flashes turn signal using a multimeter.) The low beams can be done using a $10 amazon harness in the Google doc.
So i just bought a 2007 Honda Accord . It has sunroof so idk its a ex or lx. I need to replace my front bumper and headlights coz they are both fuked up man.. I just found ur channel and thought you could help with it. So plz
It should be the same steps as this video to get the headlights and bumper off. Bumper has a few extra bolts on the bottom as well. If it has both a sunroof and volume controls on the steering wheel it's an EX.
@@samidpersia9832 I would check a junkyard at first, sometimes you can find them pretty cheap and already paint matched. If not, ebay would likely have them as well
@@samidpersia9832 It depends on what's near you, I've seen tons of junkyard Accords that have been rear ended so the front bumpers are still perfect. It would be cheaper that was but ebay is better for convenience factor
If you have an 06-07 Accord that's just how they are from factory. You can look up if there's a way to disable the factory DRL or just drive with the low beams on instead
You need an LED flasher relay or use resistors with the turn signals. You can get the flasher relay here: www.diodedynamics.com/lm526-led-turn-signal-flasher.html And this is how to install it: m.th-cam.com/video/LwNUBi3-qi0/w-d-xo.html
They're in the description in the Google doc. You can change the language to English using the icon of a Japanese flag in the side menu of the website on a phone or at the top of the page on a browser
@@braydonmotivation141Ok in that case it should essentially be the same thing, you just need to tap into the turn signal plug and find which power wire is running constantly instead of blinking
@@braydonmotivation141 Yes, the stock harness for the turn signals has 3 wires: 1 ground in the middle and 2 power on each sides. One of the power wires will stay on with the headlights (parking light wire) and the other wire will only flash with the turn signals.
I put an LED flasher relay from Diode Dynamics instead. That way it doesn't hyper flash and the LED's don't use as much power as they would with resistors.
Up at the top there's an icon that looks like a globe that translates it to English. On phones the icon will be at the very very bottom. If you want you can DM me @natecolena on IG if you can't find it
Also from ebay if you type in "CL7 Hazard Switch" for 03-05 cars and "CL9 Hazard Switch" for 06-07. The connectors are different in both so make sure you get the right one.
Yeah I was going to but my grille never came in lmao. And now it's almost winter so it's too cold to do anything but in spring hopefully I can install it
You can find the part numbers on this diagram, and look them up and see where they are for sale. I would recommend a website called "Amayama" to get brand new OEM JDM parts. LINK BELOW jp-carparts.com/honda/partlist.php?maker=honda&type=INSPIRE&cartype=12258&fig=B&fig1=800
It just depends on how much you want to spend. I forget what seller I got mine from, I just clicked whichever came up first at the time. Usually it doesn't make a difference as long as the condition looks good.
The ballasts were replacements for a 2008 Acura MDX (made by Matsushita, same as stock Inspire.) And the headlight brackets were just the stock ones off the car
There's still some for sale on ebay for $120, I just made the exact same things so I could learn how www.ebay.com/itm/2003-07-Honda-Accord-to-UC1-JDM-Inspire-OEM-HID-headlight-adapter-harness-UC3-/333222438337?oid=333174105672
@@SteezeThePlug You need the wires for the low beam, and another to split the stock turn signal bulb into 2 bulbs (city/DRL and turn). High beam you don't need wiring.
At 13:03 you can see the adjustment screws in the picture, it's the circular gold ones. There are 2 adjustment screw on the outer parts of the headlights that can be adjusted the same as the low beam.
@@ashishjangir8885 I found this video about how to do it, but I believe the high beams can't be adjusted on the stock headlights since they are next to the low beam instead of above it like on the Inspires. th-cam.com/video/8CEOst-qmcs/w-d-xo.html
The Inspire doesn't have sidemarkers either, only the Accord CM5 in malaysia and other southeast Asian countries does. But yeah Honda sure loves to give USA the most basic models
Thanks for the video. I am a newb and my girlfriend damaged the front and needed to replace my bumper, fender, and headlights. I will be doing this and following your very helpful video. People on the forums say you cant adjust the rhd inspire properly. You made me a believer. Thanks again
Just got my set in today, so glad you posted this man. Definitely subscribed!
No problem bro, I appreciate the support
Ezequiel Reyes why are they so expensive ?
@@reinaldonavarro3800 The price has actually gone down quite a lot in recent years. Back in 2013-14 a set used to run for $800 or more for the lights alone with no bulbs compared to around $300 today. The reason why it's still expensive is because they come from a car that was never sold in the USA, so they're still pretty rare and much harder for sellers to source them.
@@NoPointOfThis123 nice work man they look amazing. Were did you get the headlights?
@@MiguelLopez-wi5nm I got them from ebay
That accord really coming along! LOVE YOUR VIDS!! I've got a 7.5 Gen and building my own headlights as the inspires are a bit too pricey. I'm getting a used set of oem's putting in a sequential led strip and retro fitting 2.5 projectors. I'll be making a series on my other channel. Accord authority.
Thanks for this, just bought an 03 and this is very helpful
You've given me hope for my project car (2005 Honda Accord sedan 2.4l vtech)
Where did you get the inspire lenses? Are they OEM JDM honda? I thought i saw a honda stamp on the back. Did your car come with HID before or were the HID ballasts in the inspire? This looks sick! Thanks for posting.
Yes, they are OEM JDM. I got the headlights from ebay and the bulbs from Amazon Japan. I have a link to a google doc in the description, but there's an adapter cable for $10 that allows you to plug the HID ballasts into the stock connector.
I like how those turn signals came out
Dude ur amazing i been slowly upgrading my 7th Gen accord thanks for tye tutorial
i have to say i really like this mod, i was a bit curious about the wiring gauge used and if I were to make the wiring setup myself is it optional to run a 7443 socket for the turn signal than the 7440 socket?
I used 16 gauge wire at the time, and I'm pretty sure you can use 7443 as long as you can make the socket fit inside the housing. I used a dremel on my old 9005 LED low beam bulbs so they would fit in the 9006 socket for the Inspire high beam.
Love the uc1 conversion now all you really need is side mirrors and front end conversion (hood fender bumper), need to slam this thing already I got a 7th gen too, not going the uc1 route though
Facts I wanna do all that stuff pretty soon but I gotta save some money first lmao. But it won't be too long until I'm full Inspire
More vids bro ! Love the accord
Here in Ohio it's legal to use white turn signals. So I matched up my Auxbeam LED Hi/Lo to my Parking/Turn signals. It looks freakin good. Now my friends are doing the same thing :) Oh yeah, I have a 02' Accord.
Definitely will be using this video when installation 🔥
been trying to find these headlight assembly; i hope i could hook it up nicely as you; nice video, i have the projectors on my Gen7 now but will be upgrading again lol. good luck with eveything from NYC
Very informative video and spreadsheet! Thanks!
I need help adjusting mine are all crazy direction. I been trying to use the adjuster but still no right direction
Pura vida desde Costa Rica 🇨🇷🇨🇷🇨🇷🇨🇷🇨🇷yo tengo también un Honda accord 2004 y le estoy haciendo muchas modificaciones inclusive otros focos y franki ....Coooool
Great video and demo. I have a 2007 accord, and guess I will do exactly what you did here. Thx!
Those headlights are on my wishlist for my 07 Accord. Can you put the links to where you purchased everything in the description?
I linked a google doc in the description with everything you'll need
@@NoPointOfThis123 oh wow ! You're the best thanks
Looks so good!
Hey you should do a courtesy light upgrade for the back doors the inspire has them but the top trim models , U S accords has red reflectors and none ever received the back courtesy lights. The hole is there for adding one...
I was actually thinking about that before I just need to figure out how to wire them in
Greetings friend, I liked the whole video but I have a question. I want to install the headlights but they only work with HID lights? Because right now I am using the factory headlights but with LED lights and they are super bright and illuminate well all the road.
Yes the low beams in these are D2S which are only available as HID since they use a ballast to power the bulbs. I used to have LED in my stock headlights as well, but these are brighter plus they don't blind oncoming traffic
Can you still turn the lights all the way off while car is on and in Park? Or will the “city light” or “parking light” always be on??
They only turn on when the headlights are on, either in low beam or just parking light mode. If you turn them off they'll be off completely
These are rhd. I see a bit of flare to the right. Does it get worse from a distance? Any problem seeing signs?
@@MrCutlash I didn't have any issues with them when I had this car. I just had to aim the left side low enough that it wouldn't blind oncoming drivers. On country roads with no street lights oncoming traffic would flash back at me occasionally but in cities it's fine.
Where can I find headlights like yours
I got them on eBay but you can also find them on some Japanese auction websites like Jauce
The problem ain’t hid o led. Is that the last housing was made for hologen. I want this but 300 to 500 is tooo much. I’m put switch backs on my then keep waiting until I finish my car. To get the extra stuff like the rear lip and this .
Dude,.. Love the video, how can I order the head lights for my accord?
These are usually for sale on ebay if you just look up "UC1 headlights"
Do the city lights end up only turning on if parking lights or headlights are on? Just wondering cause my Accord has stock DRL's through the high beam bulbs.
Yes they only come on with the parking and low beams. You can probably look up how to disable the high beam DRL if you don't want it or do some other wiring setup
dear
I thank you for your special installation of headlights
I also have the same model, but I need your help. How to order these pieces from any website?
Thank you
In the description you will see a document with all the parts
Hey where did you get the wire harness...or did it come with the headlights?
There's someone on ebay who custom makes them if you search "UC1 Harness"
Hi bro.. first of all thank you for making this video.. it so amazing for us..
I have an accord 2005 which already come up with inspire headlight.
Can the low beam which has d2s bulbs change to led d2s? Is it only fit for d2s bulbs?
Thank you broo...
I'm not sure if they make LED D2S, because D2S bulbs are originally HID. But they are very bright anyways as long as you buy a good brand.
Great video. Question. For the amber leds you need resistors to avoid hyperflash?
I installed an LED turn signal relay which goes above the drivers footwell. Resistors make LEDs use as much power as a stock bulb, but with the relay they don't hyperflash and still save battery power. You can find this by looking up "LM526 LED Flasher Relay"
@@NoPointOfThis123 awesome thanks man. 🙏 i just got my headlights. Now getting the bulbs.. for the d2s. What webpage i can find them? Thanks ..
@@MiguelLopez-wi5nm Those are in the description, I got them off Amazon Japan. You can click on the Japanese flag icon at the top of the website or in the side menu to change the language to English. It had free shipping at the time I ordered them and I believe they still do.
Great .. thanks mann. 🙏💯
Hey man . Note..I have a 06 accord. And it has daytimerunning light but its on the high beam. Its going to look different from yours..you suggest unplug the highbean since we dont use it?
Do you still have those switch back led turning signals I could use them
Leppein makes a good Switchback LED for these cars, I have them in mine and they work great. Look that brand up on Amazon!
@@ericcraighead9158you still have it?
Turn signal and city light bulb size????
Would also help if all sizes were in description...
Also, D2S is projector housing, D2R is reflector housing..... not all are cross-capable
Allegedly D2C = D2R + D2S
Which would mean D2C works with both because its got both notches
Quick question. Will this inspire headlights fit 7th gen coupes?
Yes it does fit on the coupe
Do these bulbs work on usdm accord or imma better of just staying with regular led bulbs and hid
The bulbs in the description will work as turn signals for the rear, for stock headlights you need 9006 LED low beam and 9005 for high beam. The other bulbs will only work on Inspire headlights
Do you have the wiring diagram?
Couldn't find on posted link
I just did a basic drawing but there's not really a full diagram. The plug for the DRL and Turn Signal has 3 wires on the stock harness. The middle wire is ground, and the outer 2 are each power with 1 being for one bulb and 1 for the other. You just need to split the harness, run the ground wire to both, and each respective power to the correct bulb (can check which one flashes turn signal using a multimeter.) The low beams can be done using a $10 amazon harness in the Google doc.
I would love to have these housings but my 06 Accord has the daytime running lights and high beam as the same bulb.
It would still work, I'm pretty sure you can pull the DRL fuse and it will make them function only as high beams
Mine work you have to make or buy a adapter harness a seller on eBay sells them for $150 a piece
Mine still work after two years
Will this work on a 2003 Accord that doesn't have "city lights" stock?
Yeah the wiring harness just splits the stock turn signal into 2 separate bulbs
So i just bought a 2007 Honda Accord . It has sunroof so idk its a ex or lx. I need to replace my front bumper and headlights coz they are both fuked up man.. I just found ur channel and thought you could help with it. So plz
It should be the same steps as this video to get the headlights and bumper off. Bumper has a few extra bolts on the bottom as well. If it has both a sunroof and volume controls on the steering wheel it's an EX.
@@NoPointOfThis123 Thank you and yes it does so it is an Ex lol. But any idea where I can buy the bumper?
@@samidpersia9832 I would check a junkyard at first, sometimes you can find them pretty cheap and already paint matched. If not, ebay would likely have them as well
@@NoPointOfThis123 lol junkyard fr?? but yeah ebay sounds good
@@samidpersia9832 It depends on what's near you, I've seen tons of junkyard Accords that have been rear ended so the front bumpers are still perfect. It would be cheaper that was but ebay is better for convenience factor
So the “city light” is a drl or corner light?
They call it a city light or position light but yeah it's just a drl that can be turned on and off on the accord harness
Hi again sorry to bother you, I have one question about the headlamps when I put the emergency brake down the high is my DRL?
If you have an 06-07 Accord that's just how they are from factory. You can look up if there's a way to disable the factory DRL or just drive with the low beams on instead
@@NoPointOfThis123 I appreciate you man theyre hooked up I love em
What are the exact signal bulb sizes? I keep seeing between 7440 and 7443
The turn signals are 7440. 7443 is only for the brake lights, which look like nearly the same bulb but they won't actually work in the turn signals
clean
Did you buy your inspire headlights from eBay? If so which eBay seller?
I don't remember the seller I just got the ones that looked like they were in the best condition
That red hazard button tho
Would those fit a 03,ex,accord
Yes, this car was 03 EX.
I have a 06 accord I did this install but for some reason my turn signals fliccer really fast I bought the same bulbs you have
You need an LED flasher relay or use resistors with the turn signals. You can get the flasher relay here:
www.diodedynamics.com/lm526-led-turn-signal-flasher.html
And this is how to install it:
m.th-cam.com/video/LwNUBi3-qi0/w-d-xo.html
@@NoPointOfThis123 nice video man. How much were those headlights?
@@MiguelLopez-wi5nm Around $300 for the headlight assemblies and $150 more for the bulbs, wiring, etc
Nice man. Im on the headlights. Keep us update with your videos man. Thanks.
Hey nice video dude; wondering if youre able to help me out by getting the lights from where you got it from?
I got them from ebay by just searching "Inspire UC1 headlights"
@@NoPointOfThis123 im only getting the headlights; maybe i was specific web site to the lights package you gotten from Japan light bulbs
@@stevem3384 Yeah in the description you'll see where I got the bulbs from but the headlights alone were ebay
Hi can you please share the website you got the bulbs from please
Amazon Japan but they should have them on HID Concept
@@NoPointOfThis123 thanks a lot for your reply appreciate it a lot
Can you mention the link for the bulbs you bought from japan
They're in the description in the Google doc. You can change the language to English using the icon of a Japanese flag in the side menu of the website on a phone or at the top of the page on a browser
I'm looking to get DNA monitoring headlights for my Accord. I'm guessing the wiring is all the same?
Those might be plug and play but I'm not completely sure
@@NoPointOfThis123 someone said you have to wire the led light bar to the parking lights. Not sure how to do that
@@braydonmotivation141Ok in that case it should essentially be the same thing, you just need to tap into the turn signal plug and find which power wire is running constantly instead of blinking
@@NoPointOfThis123 so that wire is for the running lights. That connects to the led?
@@braydonmotivation141 Yes, the stock harness for the turn signals has 3 wires: 1 ground in the middle and 2 power on each sides. One of the power wires will stay on with the headlights (parking light wire) and the other wire will only flash with the turn signals.
Can you please share the link to buy this please....
These were just from ebay, if you look up "UC1 Headlights"
Whered you get the headlamp assembly!! Can you send me a link?
I just looked up "Inspire UC1 Headlights" on ebay, there's usually several pairs for sale no matter when you look due to how popular they are
@@NoPointOfThis123 gosh they are expensive but i cant find a similar look any other way. Thanks for the assist!
Did you need load resistors to prevent hyper flashing for those switchback LED turn signals?
I put an LED flasher relay from Diode Dynamics instead. That way it doesn't hyper flash and the LED's don't use as much power as they would with resistors.
haha
very nice video
very informative 😳☝️
When you order the bulbs/ lights from the Japanese amazon site how the hell can you even read this stuff man
Up at the top there's an icon that looks like a globe that translates it to English. On phones the icon will be at the very very bottom. If you want you can DM me @natecolena on IG if you can't find it
Wow where did you get your Jdm red hazard button
Also from ebay if you type in "CL7 Hazard Switch" for 03-05 cars and "CL9 Hazard Switch" for 06-07. The connectors are different in both so make sure you get the right one.
So do we have to go to japan to do this build?
You can find the bulbs in the description, for the headlight housings I got them off ebay
Cool thanks
Bro were can i find the harness i need it asap
They have some on ebay if you look up UC1 harness
Hey man, you should try the front bumper swap with the 06-07 and aftermarket fogs. Looks super clean
Yeah I was going to but my grille never came in lmao. And now it's almost winter so it's too cold to do anything but in spring hopefully I can install it
😂 that’s crazy. Oh also are your rims from the 07 accord? I used 08 tsx rims but I’m kinda feeling your look a bit more.
@@ToniJ95 Mine wheels are 8th gen V6 coupe
How do I get the bulb sockets and the back cover
You can find the part numbers on this diagram, and look them up and see where they are for sale. I would recommend a website called "Amayama" to get brand new OEM JDM parts.
LINK BELOW
jp-carparts.com/honda/partlist.php?maker=honda&type=INSPIRE&cartype=12258&fig=B&fig1=800
Do you recommend a seller? I'm searching for these same ones.
It just depends on how much you want to spend. I forget what seller I got mine from, I just clicked whichever came up first at the time. Usually it doesn't make a difference as long as the condition looks good.
@@NoPointOfThis123 can u recommend a few sites to look at? Thanks for the help.
@@just_jun2 Ebay is usually cheapest and has good variety if you just search "Inspire UC1 Headlights"
Wow looks sick 🔥 keep making more of these videos!!
What ballast and bracket is that bro
The ballasts were replacements for a 2008 Acura MDX (made by Matsushita, same as stock Inspire.) And the headlight brackets were just the stock ones off the car
How much would you charge me for a set of harness ?
There's still some for sale on ebay for $120, I just made the exact same things so I could learn how
www.ebay.com/itm/2003-07-Honda-Accord-to-UC1-JDM-Inspire-OEM-HID-headlight-adapter-harness-UC3-/333222438337?oid=333174105672
Why can’t you use regular 9005 led bulbs
For the high beams I've now replaced mine with 9005 LED. The low beam uses HID and only D2S bulbs will fit
NoPointOfThis123 so wiring isn’t required necessarily?
@@SteezeThePlug You need the wires for the low beam, and another to split the stock turn signal bulb into 2 bulbs (city/DRL and turn). High beam you don't need wiring.
Could you show a way to adjust the highbeams?
At 13:03 you can see the adjustment screws in the picture, it's the circular gold ones. There are 2 adjustment screw on the outer parts of the headlights that can be adjusted the same as the low beam.
Okay so i have the stock headlights on my accord not the inspire ones.. i havent been able to even find the screw to adjust the low beams. 🤦♂️
@@ashishjangir8885 I found this video about how to do it, but I believe the high beams can't be adjusted on the stock headlights since they are next to the low beam instead of above it like on the Inspires. th-cam.com/video/8CEOst-qmcs/w-d-xo.html
My drl stop working any advice
Check the bulbs and if that doesn't fix it make sure the wires are still good
Thx bro
How do I get d headlamp and android radio
Headlights you can search "UC1 Headlights" on ebay and the radio is in the link on my radio video
Mine is an 04 with this work?
Yes all 03-07
@@NoPointOfThis123 thank you
I wanted to see the high beams
I need a site requesting headlights
Ebay if you look up "Inspire UC1 Headlights"
Wow your car doesnt even have sidemarkers. Talk about low budget inspire. Here in Japan theyre a luxury car.
The Inspire doesn't have sidemarkers either, only the Accord CM5 in malaysia and other southeast Asian countries does. But yeah Honda sure loves to give USA the most basic models
Hey I like to now the name of lith
They are on ebay sometimes if you search "UC1 Headlights." They come from the Honda Inspire UC1 which was a car only sold in Japan
No such thing as a City Light
That's just the terminology used on lots of Japanese-spec cars. It's the same as a parking light, corner light, DRL
@@NoPointOfThis123 city rhymes with s-ttty
@@NoPointOfThis123 lol
Yup!
Does the top part of the headlight light up or is it just dark and if so with led lights are they very bright ?
Yes the top part lights up with the high beams, I put LED bulbs into them and they were super bright