Reebok fury instapump does not work / FIX in the description
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- I fixed it, it is relatively easy fix! You need a can with compressed air (it is used for blow off cleaning) and a glue I used LOCTITE Super Bond Pow but any other fast glue can do the job. First fill the shoe with the compressed air can through the hole in the pump (it is in the center of the pumping area a small hole) my shoes appeared to be punched by a stupid person in the shop with a tag gun on the side of the shoes, when you fill it with the compress air can you can hear and see where you have hole in the system! After that I COMPLETELY release the air in the system and glue the 2 holes (one from the outside of the the shoe the other was in the inner side of the shoe) with a tiny drop of glue exactly on the holes because the holes was very tiny this was job done! Easy and fast, they was like a new! I hope this will help you. It is important to use tiny drop of glue because if you use a lot you can damage it further, if the hole is big you need to glue a patch but will be ugly and ridiculous if it is on the inner side where you can not see it is OK but if it is visible you have to be creative so to blend it with the color of the shoe.
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Like many other, mine doesn't keep air inside. Few minutes and no air.
I was thinking about submerging them in bathtub water and seeing where the air escapes, but I'm not sure if that's good for the shoes..
I fixed it, it is relatively easy fix! You need a can with compressed air (it is used for blow off cleaning) and a glue I used LOCTITE Super Bond Pow but any other fast glue can do the job. First fill the shoe with the compressed air can through the hole in the pump (it is in the center of the pumping area a small hole) my shoes appeared to be punched by a stupid person in the shop with a tag gun on the side of the shoes, when you fill it with the compress air can you can hear and see where you have hole in the system! After that I COMPLETELY release the air in the system and glue the 2 holes (one from the outside of the the shoe the other was in the inner side of the shoe) with a tiny drop of glue exactly on the holes because the holes was very tiny this was job done! Easy and fast, they was like a new! I hope this will help you. It is important to use tiny drop of glue because if you use a lot you can damage it further, if the hole is big you need to glue a patch but will be ugly and ridiculous if it is on the inner side where you can not see it is OK but if it is visible you have to be creative so to blend it with the color of the shoe.
Atanas Gulev I have a similar problem but mine inflates just doesn't stay inflated
@@jaytaylor26newbi same here
My ZX instapump fury i pump It Up and the Air goes away after half hour i dont understand why
I had the same problem today, important to let the glue set for a few hours before pumping the shoe
DARTHeeek How do you know, where is the small hole? Now, I have the same problem. Help me, please.
How do you know, where is the small hole? Now, I have the same problem. Help me, please.
Try to get some air into it and then put the shoe under water, look attentively to see where the bubbles come from
Can someone help me?
I have og pump, my pump is working fine but after 1 hour of waking air goes away, not all but a part of it. I can't find any hole or smrh like that. Is that normal on this sneaker?
Mine too, I tried searching for a repair shop for this on the web but I'll try some methods to trace that tiny hole.
@@ezequiellelaconico225 any advice on this?
@@meei I tried soaking the right shoe on a basin, while at it, it seems the main pump releases air faster than the other. After I drying it, the shoe airbag was finally able to hold air like before. But after some time it return back to its previous state. By the way my shoe was a reebok pump supreme, not the one in the video.
@@ezequiellelaconico225 well mine too, the air seems to leak from the hole of the pump button. If the shoe gets wet it can hold in the air normally, but as it dries it can only inflate for around 15 mins. Still trying to figure out how to fix this :(
Same problem here.
I think we just gotta live with it
I have the same problem :/
borisvojnovic5 yea me too :(
I fixed it, it is relatively easy fix! You need a can with compressed air (it is used for blow off cleaning) and a glue I used LOCTITE Super Bond Pow but any other fast glue can do the job.
First fill the shoe with the compressed air can through the hole in the pump (it is in the center of the pumping area a small hole) my shoes appeared to be punched by a stupid person in the shop with a tag gun on the side of the shoes, when you fill it with the compress air can you can hear and see where you have hole in the system! After that I COMPLETELY release the air in the system and glue the 2 holes (one from the outside of the the shoe the other was in the inner side of the shoe) with a tiny drop of glue exactly on the holes because the holes was very tiny this was job done! Easy and fast, they was like a new! I hope this will help you.
isto bate, jesi li ih popravio na kraju? :D
@@clippygangent.1834 isto