THANK YOU SO MUCH!!!!! I bought a all glass lamp with the exception of a couple of bronze pieces in between each glass part...its a beautiful lamp from pier one but for the past two years haven't been able to use it because it was wobbly. ..and I was NOT throwing it away costed a pretty penny ..but anyway. ...I finally fixed my wobbly lamp thanks to your video. ..and it was something I knew would be simple smh lol..thank you!!
Never explained about the lamp rod where the cord runs through and the nut that holds this rod securely. This is my problem with this very old ceramic lamp that I had to replace the socket on. 0:01
Your solution didn’t help me… it makes it worse. For other people reading this…Just do this ….Take off the shade to expose the socket, then look for a small setscrew in the bottom of the socket`s base. You will notice that this socket base screws onto the top of a small-diameter threaded pipe, so you can tighten it back down by turning the base of the socket clockwise while holding the lamp base steady. Before you do this make sure the setscrew is loose (it probably already is-but if it isn`t, loosen it). If the threaded pipe keeps turning when you try to tighten the socket base by turning it, look under the base of the lamp (or under the felt that covers the bottom of the base) for a nut. Hold this nut with pliers to keep it from turning while you tighten the socket. After the socket base is tight, retighten the setscrew.
This comment helped me. I didn't actually need to deal with the setscrew (I was nervous about poking around inside the socket, so this was good news). I was able to pull away the felt at the base of the lamp to expose the cord and the nut, then hold the nut in place with one hand while turning the lamp with the other hand. I also found that the cord had become wrapped around itself, so I was able to unravel it by twisting it in the opposite direction.
Finally! I straightened my lamp. I had to try several times but it is no longer wobbly. Whew! Thank you!
Yay! Fixed my wobbly lamp that I love. Thank you for your clear instructions :)
THANK YOU SO MUCH!!!!! I bought a all glass lamp with the exception of a couple of bronze pieces in between each glass part...its a beautiful lamp from pier one but for the past two years haven't been able to use it because it was wobbly. ..and I was NOT throwing it away costed a pretty penny ..but anyway. ...I finally fixed my wobbly lamp thanks to your video. ..and it was something I knew would be simple smh lol..thank you!!
Nice one mate, was about to chuck it out, and now it is perfect! Thanks 😊
Fixed my lamp! Thank you!
Never explained about the lamp rod where the cord runs through and the nut that holds this rod securely. This is my problem with this very old ceramic lamp that I had to replace the socket on. 0:01
So glad I watched this, what I thought was a major problem was so simple ...wish I hadn’t wasted my time watching everything else
Wow, such a simple repair when you know what the problem is - thanks!
You make this process look so easy! 💓
Awesome advice and exactly what I was looking for!
Thank you so much!
FANTASTIC, thanks you did a great job of explaining that.
It worked 💪
Threaded rod was the key, thanks. I thought the wire would just twist around.
How do I fix a lamp shade that is not straight? It’s not wobbly but it just isn’t sitting flat
Leave it slightly loose. Level with a shim of aluminum foil. Retighten.
Thank you! I unscrewed the lamp and could not get it to tighten down.
Thanks, It worked.
But how do you fix a wobbly lamp?
Why would we be looking this up if it was that easy?
Didn't work for me
Your solution didn’t help me… it makes it worse. For other people reading this…Just do this ….Take off the shade to expose the socket, then look for a small setscrew in the bottom of the socket`s base. You will notice that this socket base screws onto the top of a small-diameter threaded pipe, so you can tighten it back down by turning the base of the socket clockwise while holding the lamp base steady. Before you do this make sure the setscrew is loose (it probably already is-but if it isn`t, loosen it). If the threaded pipe keeps turning when you try to tighten the socket base by turning it, look under the base of the lamp (or under the felt that covers the bottom of the base) for a nut. Hold this nut with pliers to keep it from turning while you tighten the socket. After the socket base is tight, retighten the setscrew.
This comment helped me. I didn't actually need to deal with the setscrew (I was nervous about poking around inside the socket, so this was good news). I was able to pull away the felt at the base of the lamp to expose the cord and the nut, then hold the nut in place with one hand while turning the lamp with the other hand. I also found that the cord had become wrapped around itself, so I was able to unravel it by twisting it in the opposite direction.
Go to WoodPrix if you'd like to build it yourself.