Forgive me, could you send me detailed photos on the system to pull the milar ... the one made with the inner tube, I did several tests, but in the end I think it is the best way and for this I would like to build a similar one. Thanks again. P.S. you can send them on FB.
well there is not much to it. get a piece of wood as thick as the tire you use. make a round or square piece, where the inner tube will fit around. wrap the mylar over the piece of wood and over the inner tube that is around the wood. stick the mylar on the bottom side of the wood. blow up the tube and the mylar will be stretched. mine is no different. except it has a hole based on Quad panels. so i could measure and compare resonance of a panel before i glue them down to an quad panel.. never finished that project though to much hassle .
Yshield i only uses as source for graphite, i wont recommend buying it. if you want to make your first esl go get a can of lyrcon crystal permanend coating. biggest change of succes without all the crap i bought.
Forgive me, could you send me detailed photos on the system to pull the milar ... the one made with the inner tube, I did several tests, but in the end I think it is the best way and for this I would like to build a similar one.
Thanks again.
P.S. you can send them on FB.
well there is not much to it. get a piece of wood as thick as the tire you use. make a round or square piece, where the inner tube will fit around. wrap the mylar over the piece of wood and over the inner tube that is around the wood. stick the mylar on the bottom side of the wood. blow up the tube and the mylar will be stretched. mine is no different. except it has a hole based on Quad panels. so i could measure and compare resonance of a panel before i glue them down to an quad panel.. never finished that project though to much hassle .
Did you only use ysheld for the coating?
Yshield i only uses as source for graphite, i wont recommend buying it. if you want to make your first esl go get a can of lyrcon crystal permanend coating. biggest change of succes without all the crap i bought.
@@joppepeelen Ok,
try rubbing fine carbon powder, to membrane, it is eternal, not temporary :)
Graphite you mean. Yes it works but is very incosistent low impedance and really realy messy hihi:)