HOW TO CHANGE the spring of your YOW MERAKI truck

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 มิ.ย. 2024
  • Hey amazing that you check out the Info Box :)
    I`m 24 years old and I have an addiction to all board sports so if you want to see future projects like Skimboarding, Surfskating or Snowboarding than Subscribe. You can also Subscribe to just support me would be LOCO ;)
    ------------------------------
    Sunset by LiQWYD / liqwyd
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/3i9wDKV
    Music promoted by Audio Library • Sunset - LiQWYD (No Co...
    ------------------------------
    ------------------------------
    Hold On by Spiring / user-57630131
    Creative Commons - Attribution 3.0 Unported - CC BY 3.0
    Free Download / Stream: bit.ly/2VnhRHG
    Music promoted by Audio Library • Hold On - Spiring (No ...
    ------------------------------
  • กีฬา

ความคิดเห็น • 9

  • @rvdt4ever
    @rvdt4ever 2 ปีที่แล้ว +1

    For the next time: a small trick to put back the washer/bearing set. Put the washer/bearing set on the tips of your fingers. With your other hand hold the spring. Angle the spring a bit and slide the whole set in from the bottom and then put everything on the axle again.

    • @rvdt4ever
      @rvdt4ever 2 ปีที่แล้ว

      @@yvesheld Did you check the 2 Meraki bearing sets for lubrication? I live right at the beach and oil doesn’t last very long here on these exposed bearings. I typically put lithium grease on the 2 Meraki bearings. The lithium grease stays in place longer and also acts as a better barrier against sand and dust. Oil works fine, but you need to do it more often.

  • @mysticlegendtv9317
    @mysticlegendtv9317 2 ปีที่แล้ว +1

    Nice one 🔥🔥🔥

  • @ruco1a
    @ruco1a 2 ปีที่แล้ว

    That looks like nivea cream, haha.
    Thanks for your surfskate videos. I just got one and liked your content.

  • @surfonland3402
    @surfonland3402 2 ปีที่แล้ว +1

    👍

  • @AlmyrBatista
    @AlmyrBatista 2 ปีที่แล้ว

    Hi, is that possible to you inform the correct measures of the original "Bronze self lubricating bushing" that sits inside the meraki with the bearings? the inside and outside diameter and its heigth (in milimeters). I lost mine when cleaning and lubricating it. If you can, I would be very grateful! Cheers from Brazil.

  • @kymastyl
    @kymastyl 2 ปีที่แล้ว

    Is it the same like for the V4 S5 Adapter?

  • @808Mark
    @808Mark 2 ปีที่แล้ว

    Are the s4 and s5 truck the same? Can i literally just change the spring to change the feel of it?

    • @808Mark
      @808Mark 2 ปีที่แล้ว

      Thank you!