Line following robot without arduino || 5V relay line follower robot || motor driver not required.
ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2022
- #linefollower #robot #arduino
Business inquires
E-mail : skynetrobotics123@gmail.com
Connect With Skynet Robotics
Facebook: / skynetroboticspage
Instagram: / skynetrobotics
For Ready Made Electronics projects Message me on WhatsApp
+919075800409
WARNING:
This video is for demonstration and education purpose only. Each demonstration presents risk and hazards that must be fully understood before attempting. And should be performed only by professionals.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
In this video tutorial you can learn how to make a line follower robot without Arduino
line following robot is one of the favorite project in the field of robotics engineering.
in this arduino line following robot tutorial you can make line follower robot using arduino and line following robot without arduino.
We can make line following robot with obstacle avoidance. line following car and line follower robot working mechanism is same . simple line following robot can be buid without microcontroller.
arduino line following robot required code to be upload in Arduino.
This is award wining project in line follower robot competition.
line follower robot using microcontroller needs programming and fast line follower robot requires high quality sensor . arduino line following car video i have uploaded you can visit.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
#arduinoproject #engineering #howto #electronic #project #robotics - วิทยาศาสตร์และเทคโนโลยี
Very nice thank you for your video. waiting for next following robot
I made one of these at school it worked great
Which robot is better this one or the one you made using motor driver. Which will work better ?
This would be more cost effective only worry is if it could work as good as motor driver one or equivalent to it
Sir now it's working perfectly sir thank you so much tomorrow I submit my project with confidence sir .Thank you
All the best
@@skynet-robotics per inhe oder kaise kare sari link dedo na pls
Can I use 9v battery instead?
Could u please share the link of products
Why does the wheels keep on rolling even if there is no object and sensor's sensitivity has been properly set
What is the rpm of motor plz reply
Sir please send the buy link of IR sensor
Sir can uh give this project synopsis please
Sir I am from tamilnadu,Very very thank you sir it's 💯 percentage works tomorrow I submit my project at college
All the best
Will it work if tape is white??
Can i use the relay which you used in making" short circuit protection using relay" on your recent video
Yes but u need some extra components like resister , diod etc
Does this circuit still work on the black board with white line? If it's not , should i change my Ir sensor position?
Yes it will work but you have to connect wire to NC port instade of NO on relay
thanks a lot
Please make a video on it please
Sir I have doubt can you please solve it
Query : Our left side motor doesn't work but all wire are connected according as you have said in the video
And some error sound is forming through it .
So please solve our problem
Send video on WhatsApp
Which v battery should we use at least sir?
I am currently using 9V battery and the speed is too fast.
7.4V
Or use 100rpm motors
Bro one wheel not working inee
To submit tomorrow fasst
Excelente projeto.
Thnx
Sir my robot is not working. When I turn on the robot , the wheels are not rotating, and the green light on the 5v relay is glowing but it is dimming after few seconds and the in and out LED on the sensor also
Which Battery u r using
@@skynet-robotics 4v 1.5ah lead acid rechargable battery
is the gray wire of gear motor connected to NO in relay, positive or negative?
Positive
Thank's for your tutor sirr
I'm from indonesia
I wan't ask you, if we use arduino uno, how to make the wiring for the line follower, because i follow u for this wiring
I hv made video for arduino line follower
U can check on TH-cam
Line follower robot skynet robotics
Double Li - Ion battery se kuch short-circuit toh nahi ho na meri 7.4v ki hai , please reply sir
Nhi hoga bas speed badhega
Hi sir i have done everything but it doesn't work pls reply i have to submit it tomorrow
Please iski bhi video dale jaldi
line konse marker se draw krni h k ye usko sense kre
Electric wire Black tape
Bro please reply fast, both my light on the sensor are turning on when where is nothing below the sensor
Adjust the sensitivity
Rotate potentiometer(blue color) using screw driver
@@skynet-roboticsnow only one is turning on when i keep it on the ground
Sir black tape konsi surface pr lagani h? Or mera project line follow nahi kr raha h kya reason ho sakta h?
Koi bhi white is best
Sir, can build it only 1 ir sensor
No
Hello sir pls reply fast in the ac wire connector how to know which is positive and negative
This connector only connection purpose
Identify by battery wire connection
Written on battery holder
@@skynet-robotics so i can put it in any ?
@@mysterio17 yes but make sure battery + terminal connected to vcc pin of realy and sensor
-ve terminal of battery to Gnd pin of relay and sensor
Sir I send you the video sir please help me I have to submit my project on tomorrow sir
Sir what work does ac connector make
It's just connector
You can give joint instead of using it
@@skynet-robotics thanks brother
sir as demonstrated in the video i have used same materials but the car is not working the relay and the sensors are responding but motors are not responding what to do
Please respond as fast as you can
Which battery u r using
3.7 volt lithium battery
Relay sound is coming but motor is not rotating... connectivity checked. whatcould be the reason.
Which Battery used
@@skynet-robotics 18650-1200 mah 3.7v... Also I have attached HW additional batter for testing... just sound is coming in relay and motor is not rotating
Brother just tell ki ye black line ko follow kr rha h ya side wale white colour ko?
Black
Bhai lithium battery hi jaruri hai ya double a aur triple a ke do tin battery use kar sakte hai
Jaldi bata
Sir this battery kitna mAh?? A
Or me agar 1800 mAh use kora to work karega??
Ha
@@skynet-robotics sir laptop ka ceel use kar Sakta hu?? Sir forgive me for teasing you again😊
which wire you use to connect relay to ir sensors
Female to female
Female to female
thank you ❤️
I didn't get female to female for connecting ir sensors to relay then what should I do
Solder wires
🎉🎉🎉
So when ir sensor detects black it means logic 0?
1
@@skynet-robotics black line absorbs ir radiation
What if i use 2 lithium ion battery with switch. Will it work? Plz reply fast.
Yes
Ok thank
Bhaiya isme jo aapne cap use kari he vo konsi cap he pls tell😢
Sanitizer ka cap use kiya hain aor usper Caster wheel lagaya
Wooden block can be of any size?
Yes
Is it necessary to use ac connector??
No need
It's use only for wire join
Does it only follow black line sir plzz reply faster i have to submit it tommorow
Yes .
But if u want to follow white line then it can . U need just change relay connection (very simple)
In short it follow black line as well as white
Sir, can we use 100 RPM gear motor in this project
Yes
Will this have any effect on speed?
@@Sachinkumarjtfgi definitely speed depends on rpm of motor
I bought 5v relay but not module can i make it using this relay
Yes
Sir l have created the robot but it is not working because of please tell
Adjust the sensitivity of sensor
Sir black line kese banaya. Black tape h kya?
Wire tape
Sir please share the buy link of Ir sensor
Ok
One sensor is turning on when in the air and turning off when i keep it on the ground
No
it should be off when in air or black surface
sir does it need programming or not
No
Please help. How can I put a switch to turn it on and off please? Thank you
Cut red wire coming from battery and insert switch between the
@@skynet-robotics between what?
@@jenaissante26 red wire of battery which u hv cut
919075800409
WhatsApp me I will send u diagram
Sir can you please share the buy link of IR sensor
Website under construction
I will send u link in 2-3days please wait
Sir please share the buy link of IR sensor
@@user-sl3fx1ex7u 9075800409 WhatsApp me your requirements
Ye dc motor aur normal battery se kam karega
Konsi wali 9v?
Wo hw company ka Jo aata hai
Lithium battery use karna jaruri hai
Sir the ir sensors are working perfectly but motor is not working
Send video on WhatsApp
I follow your video but the sensor are not working only getting hot plz help me
Check connection polarity
We completed the project. but it won't stop on the black line? It's moving faster.Can you please help on this?
Which battery u r using
Lithium ion 3.7V
@@user-jj4bj5xp7z rpm of motor?
150
It was working but suddenly one sensor started detecting black color though everything is at right place
Isko duble chanel rile se bana sakte ha
Ha
Easily bana sakte ho
Iski speed increase ho sakti hai kya bro?
Ha
Use 300 rpm motor or 7.4v battery
Can we make it 4 wheel drive
Yes you can use
@@skynet-robotics my 4wd robot is not detecting edges of table and it falls off
My 4wd not following the line and not detecting edges
Adjust the sensitivity of sensor
@@skynet-robotics I adjusted it does not working
Mera robot black colour detect nhi kr rha kya karu 🥲
Hello brother it is not working in sunlight plz give me any solution
Use thermocol to cover IR sensor
Super fantastic thanks you 🙏🏻
Most welcome 😊
What would be the cost?
450/-
Sir Mera to single batrry se chal hi nahi Raha hai or jab me 2 batrry series me jod kar chalata hu chal to chal jata hai Lekin speed bhot jada hai speed ko kaise Kam Karu sir please jaldi bata do 15 Tarik ko jama karvana hai school me 😢😢
Use 100rpm motor
Or
Connect motor connection to sigal battery and sensor connection to Double battery
@@skynet-robotics sir 100 rpm moter ka istemal hi Kiya hai
Why did we use a 3.7V battery?
We are not using any voltage regulator .
IR sensor need approximately 5V thats why
Otherwise you can use two batteries 7.4 V
Hello, can you explain how it stops when detecting an edge?
When ir sensor not detecting edge it gives 1 signal to relay
And when relay recive signal as 1 (high) it disconnect motor connection
@@skynet-robotics the relay often comes out and you need to stick it again and again.
Where is the switch sir?
There is no switch you need to put in the battery to start
Sir what other thing we can use in place of AC wire joint connector
Yes 👍
That's connector use only for join of wires
It work comfortably?
Yes👍
Goo
👍
NOY GOOD
👍
sir please share the components list
2x Ir sensor
2x 5v single channel relay
2x 150 rpm gear motor
2x Li-ion 18650 battery
2x wheels
Ac connector
What are the components all
ir sensor
5v single channel relay
18650 li-ion battery
150rpm gear motor
I have tried everything can contact you some how
Whtsapp 9405276005
How will it work without coding
Ir sensor signal received by relay and relay activet motors
hlo sir my all sensor is working but motor is not rotating plz help sir
send video on 9405276005
Castor wheel kahi se nhi mil rha aapko kha se Mila 😢
sir can i use a diffrent rpm motor
Yes
But Use less than 150rpm
Can I get the circuit diagram pls
Given in video
@@skynet-robotics sir how to make it
My robot is not stopping when it get off from table
Adjust sensitivity
Sir now two wheels rotating forward but it doesn't follow the line
9405276005 whatsApp me video
Kindly share there circuit diagram plz
Please wait today I will send
sir my robot sensor is working but not following the line
Adjust the sensitivity
@@skynet-robotics I changed but not happening
@@MrMaruf-fn3cosend video on whatsApp 9405276005
@@skynet-robotics i have sent
Was it solved? What was the problem?
Bro reply fast other wise iwill disqalfy from science fair
Check connection digram
What's the use of this?
Manufacturing Industry
Sir black line kaise banaye
Electric wire tape
Thanks sir
Sir aap Arduino human following robot bataeya a
Sir 2 neon battary use kar sakte hai kya kuch nahi hoga n
Sir IR sensor nahi chal raha
What is its coding
No coding required
1 have send vidio plz sir help mee
plz sir check it 1 time plz sirr
How to decrease the speed of motors
Use 100-150 rpm motors
@@skynet-robotics i used them but the speed is higher than yours
@@moonknight6994 how many batteries you r using
@@skynet-robotics one
Lithium ion battery
hai,my robot is so fast it cant sense the black line
.what to do
Use 100rpm motor
Video to banali but Jo log ka project work nahi karra unku to reply delete. Some youtubers make fake videos. Agar genuine hai to apne subscribe to help karte.
I have replied everyone and solved problem personally
You can see no negative comments.
By the way tell me you problem
Sir ne mera problems bhi solve Kiya h
Cost kya hoga project me
1800/-
Sir my robot is not following the line
Sensor r working properly?
Is it 100℅ accurate?
Yes ,but in high speed accuracy starts declining
@@skynet-robotics thanks for reply
Normally you tubers don't reply
Thanks for telling