On spec lift speed full load = 385 mm/s & no load 605 mm/s You can only adjust the startup sensitivity.by entering the mode Acceleration level .You can see youtube Display nissan BX#6
Step 1 - Press and hold buttons 1 and 3 at the same time and turn the switch on. -Then press the 3-1-2-3 buttons in sequence to enter the setup menu. Note This must be done within 5 seconds. If not, restart step 1. - then select a topic Driving control by pressing button 2 to scroll down, press 1 to scroll up Notice the position of the flashing light in front of the desired topic. - When the position of the light flashes on the desired topic side, press button 5 to confirm ,to enter the topic that needs to be adjusted in drive mode - choose a topic MAX.Speed limit ฺby observing the flashing lights behind the topic.When the desired item has been adjusted, adjust the value as needed by increasing the value, press the 5 button. To decrease the value, press the 4 button.(maximum speed 20 Km/hr) - After adjusting the settings as desired, press the 5 button to confirm, the screen will return to the default pageใ - turn off the key switch and do the test.
สอบถามหน่อยครับอยากเปลี่ยนโหมดตัว P เป็นตัวอื่นได้ไหมครับ
The lifts in my fleet are set to 12mph but will not go faster than 10mph. How can I get them to go what they are set for?
On spec lift speed full load = 385 mm/s & no load 605 mm/s
You can only adjust the startup sensitivity.by entering the mode Acceleration level .You can see youtube Display nissan BX#6
Hi Good Morning , Can You Explaining In English Vision Tq
Hi Bro Can You Explaining In Enlish For Settings Speed Limit Tq
Step 1
- Press and hold buttons 1 and 3 at the same time and turn the switch on.
-Then press the 3-1-2-3 buttons in sequence to enter the setup menu.
Note This must be done within 5 seconds. If not, restart step 1.
- then select a topic Driving control by pressing button 2 to scroll down, press 1 to scroll up Notice the position of the flashing light in front of the desired topic.
- When the position of the light flashes on the desired topic side, press button 5 to confirm ,to enter the topic that needs to be adjusted in drive mode
- choose a topic MAX.Speed limit ฺby observing the flashing lights behind the topic.When the desired item has been adjusted, adjust the value as needed by increasing the value, press the 5 button. To decrease the value, press the 4 button.(maximum speed 20 Km/hr)
- After adjusting the settings as desired, press the 5 button to confirm, the screen will return to the default pageใ
- turn off the key switch and do the test.
@@unicarriersservicesupportt8796 Thank you For Ur Service Support
@@unicarriersservicesupportt8796 Hi Fren Do You No Colour Unicarriers Spray Or Paint Code Original Colour Tq In Advance
@@norzali8584 We don't have any, we make our own colors as well.