Everything is working fine with my mini pit bike ,I have blown into the pipe and it still won't start up, can you help, it's a brand new engine too , I'm giving up
@@fmfinlay9602 its the crapp carbs and fule injectors they put on them, we never have problems with full size road bikes because the quality is 100%, if figured out that if you put a good carb on them They start up first time,
My issue with my 49cc 2 stroke is when it start after I give it throttle it stall out as soons as I give it throttle also sometime if I start it. It would idle than died what would be the problem?
Seems like you have a problem with your mixture. Try to run it with choke on, if it runs slightly better, your mixture is too lean, so you need a bigger injector. You can also adjust the clip on the gas needle, try to put it higher or lower, see whats the best
I have a quad 49cc that takes like 50+ pulls to start but once it’s started it runs like normal and never cuts out, I want to know why it takes so long to start though ?
Thanks guy. I was getting frustrated. The Moto started after a few times of putting the hose over the overflow tube and blowing real hard. I could see the excess fuel coming out. Started up and stayed running. Thanks for saving us money to take it in to the shop. The directions weren't that good. But they did supply the extra hose...
@@MH-wu8ok i already fixed it but i really appreciate your help thanks. my pocket bike is now working fine i just used like a wd 40 spray and i tried to start it and it worked but thanks for the help if i have a problem again i am gonna ask you on Instagram if its oke sorry if my english is bad i am from the Netherlands :)
hi mate., i have cleaned the carb on my mini quad . but still it didnt start. the only way it starts is by blowing into the tube. and cuts out again. starts after 2/3 times doing that. I turn the fuel switch off and let it run dry before storage. i dont understand why carb jet keeps clogging. i have put new inline fuel filter too?
Hi I got my stepson a mini moto 49cc and he took it too his dads and his dad had ago 🙁 for like 5 minute then it cut out wouldn't start again I got the bike back at home now and got it started but it like its trying too rev on it's own then cuts out
Hi. It looks like there is not quick enaugh fuel coming to carburetor. It can be blocked fuel tap or bended fuel line. Watch this video from 7:20 th-cam.com/video/oGKM_1c5BVU/w-d-xo.html
it could also be a problem from the needle that controls the throtles power .. it might get stuck or from just and od bumb it might have moved frkm the position it originaly was
Hi. I have a 49cc atv and i just eanna know that the demaror(pull starter) on it doens't pull the engine everytime can you tell me some tips on how can i make it?
Did not help. Bike was only one. After that every attempt was not successful. Used these tips. Nothing. Now I don't really know what to do. My son wants to ride but I can't find the way to start the engine
then there is a problem in the bike, we have 2 videos how to find a problem in mini bike, here is link to first part, watch both and follow the videos th-cam.com/video/_1BkYqkSaQ8/w-d-xo.html
I also have a 49cc engine but it only starts if I put gasoline in the spark plug but it lasts a little and then it stops and only starts only if I put gasoline in the spark plug and so on
Hi mine too broke but i can help u there are mettalic ones buy one then if it breaks down buy another plastic one and replace the parts keep them for parts
hi, they may be very reason, first start if your flywheel is not damaged, you can also check both the flywheel and clutch and make sure they are inserted properly
I have just gotten this bike. It doesn't stay on in idle. If you let go of the gas it shuts off? What's going on? I just got it yesterday. It's had the problem right out of the box. Yes the oil/gas mixture is correct.
@@jaredfullmer5104 yes there's a small screw on the bike. You need to turn the screw in very very small proportions to get the idle and air intake corrected. This screw is found on the motor. Mine was a gold color. And has a flat head shape.
SHOP HERE 👇👇👇 🚚 Delivery to 32 EU Countries
minibikes.store
Thanks for the suggestion, blew into pipe and started straight away. Any remedies for blisters on my hands now?
Why does the pocket bike engine stop after 100 meters of walking?
Everything is working fine with my mini pit bike ,I have blown into the pipe and it still won't start up, can you help, it's a brand new engine too , I'm giving up
Same, I bought one and it just doesn't start anymore, 4 days old
@@fmfinlay9602 its the crapp carbs and fule injectors they put on them, we never have problems with full size road bikes because the quality is 100%, if figured out that if you put a good carb on them They start up first time,
@@fmfinlay9602 SAME
My issue with my 49cc 2 stroke is when it start after I give it throttle it stall out as soons as I give it throttle also sometime if I start it. It would idle than died what would be the problem?
Seems like you have a problem with your mixture. Try to run it with choke on, if it runs slightly better, your mixture is too lean, so you need a bigger injector. You can also adjust the clip on the gas needle, try to put it higher or lower, see whats the best
Try adjusting the throttle cable I had the exact same problem throttle cable adjustment fixed it :)
Thanks really helpful
Hi have a bike similar to it was driving away amd then cut out cant get it started now
How do u install a kill switch because i don’t know how to
what's new about the second version of the tornado 250ccm from 2019? can you also review this motorcycle?
Do you take off the spark plug and add the fluid there ?
Yes
I have a quad 49cc that takes like 50+ pulls to start but once it’s started it runs like normal and never cuts out, I want to know why it takes so long to start though ?
blow in to overflow hose and it should start straight away
@@MiniBikesStore i have a dirtbike tmrw ima use your method thx alot
Thanks guy. I was getting frustrated. The Moto started after a few times of putting the hose over the overflow tube and blowing real hard. I could see the excess fuel coming out. Started up and stayed running. Thanks for saving us money to take it in to the shop. The directions weren't that good. But they did supply the extra hose...
My bike cut off after about 1 or 2min of running any ideas??
Please help my sons been trying to rid since christmas
@@savanahelmick411 just died and didnt start back up?
@@MH-wu8ok yes my pocket bike just died and and don't start again do you know how to fix it
@@mohcine8495 do u have instagram so i can reach out to u?
@@MH-wu8ok i already fixed it but i really appreciate your help thanks. my pocket bike is now working fine i just used like a wd 40 spray and i tried to start it and it worked but thanks for the help if i have a problem again i am gonna ask you on Instagram if its oke sorry if my english is bad i am from the Netherlands :)
Does this bike have it's own Centrifugal clutch system?
Yed
Thank you sir, flood engine really worked, just my mouth feel a bit funny now. 🤣🤣
hi mate., i have cleaned the carb on my mini quad . but still it didnt start. the only way it starts is by blowing into the tube. and cuts out again. starts after 2/3 times doing that. I turn the fuel switch off and let it run dry before storage. i dont understand why carb jet keeps clogging. i have put new inline fuel filter too?
What tube ? I have 1 black tube on the bottom of the engine . So maybe the tranny? Idk. If I blow , the air just pushed back out
@@michael1356 the fuel overflow tube/pipe on the carb
What if my engine is locked up how do i free it v
Hi I got my stepson a mini moto 49cc and he took it too his dads and his dad had ago 🙁 for like 5 minute then it cut out wouldn't start again I got the bike back at home now and got it started but it like its trying too rev on it's own then cuts out
Hi. It looks like there is not quick enaugh fuel coming to carburetor. It can be blocked fuel tap or bended fuel line. Watch this video from 7:20
th-cam.com/video/oGKM_1c5BVU/w-d-xo.html
it could also be a problem from the needle that controls the throtles power .. it might get stuck or from just and od bumb it might have moved frkm the position it originaly was
Hi can u please help me my 49cc can start but when I rev it 2 times it turns off
check our other videos.. we have video about it... it looks like not enough fuel coming to carb
Help, mine doesn't give electricity. Even when i start up holding the sparkplug in my hand i feel nothing...please help
Thx for the great advice,i did like you said and it work like a charm.Thumbs up.
Thanks
It worked right away! Wow
Hay will you sponsor me parts for minimoto quad pocket and big fan always watching out for new video I will be watching your videos
learn to spell first
BlazinPanther shut up mate
Buy em yourself lmao
Hii sir can you please reply my request
Hi. I have a 49cc atv and i just eanna know that the demaror(pull starter) on it doens't pull the engine everytime can you tell me some tips on how can i make it?
Brand new 50cc won’t start, it ran last summer, tried to start and it won’t this summer... Tried all of your suggestions still won’t start...
my son dirt bike 49cc having some high race problem Can you tell me how to solve this
You have a flat tire mate
I was wondering what the hose was for
this hose it is overflow hose.
@@MiniBikesStore yes
@@MiniBikesStore is that similar to a primer bulb?
Rear tire is flat lol
Gas you can use gas
اي متجر هذا
Speak up
Ai mate. What size diameter for fuel hose. 6mm or 8mm?
Did not help. Bike was only one. After that every attempt was not successful. Used these tips. Nothing. Now I don't really know what to do. My son wants to ride but I can't find the way to start the engine
then there is a problem in the bike, we have 2 videos how to find a problem in mini bike, here is link to first part, watch both and follow the videos
th-cam.com/video/_1BkYqkSaQ8/w-d-xo.html
Yes I had that bike but green delivered to me yesterday
Bike price please
minibikes.store/dirt-bike-49cc-ds67
If it only worked like that lol
I also have a 49cc engine but it only starts if I put gasoline in the spark plug but it lasts a little and then it stops and only starts only if I put gasoline in the spark plug and so on
Fuel problem
thank you very much Mr
you're welcome
thanks that worked on my bike can you please tell me that if my back tire is blocked how to fix that.
hi. check you clutch. looks like one spring is damaged abd is blocking rear wheel
Does this work for any pocket bike?
First one worked🙂
Jestes z polski?
tak, z Polski
Great vid again thanks 🙏🏻👍🏻 saved my kids day and mine thank you 👍🏻👊🏻
Do these 50 cc need any other oil,besides the mix in the Gasoline??
No,
Great tips! Love it!
Bitte Deutsch reden
Hi mate bought 4 pull starts in a week an all keep braking any good companys that sell strong ones
If u got the easy semi automatic starter dont buy those- theyre absolute garbage, i had a new engine with it and it broke after a day
Hi mine too broke but i can help u there are mettalic ones buy one then if it breaks down buy another plastic one and replace the parts keep them for parts
My pull start is very hard to pull
get the easy pull start, you will need to replace the pull start and the flywheel but it will be much easier to start the engine
i don’t care
Why you watching then
Can you say me why my Pocket Bike vibrate to much
hi, they may be very reason, first start if your flywheel is not damaged, you can also check both the flywheel and clutch and make sure they are inserted properly
This is magic!!thanks bro
you're welcome.
Good video!!
thanks
Can i have a motocross for free?
I have just gotten this bike. It doesn't stay on in idle. If you let go of the gas it shuts off? What's going on? I just got it yesterday. It's had the problem right out of the box. Yes the oil/gas mixture is correct.
Did you ever find out what was wrong with your dirt bike? Mine is having the same problem
@@jaredfullmer5104 yes there's a small screw on the bike. You need to turn the screw in very very small proportions to get the idle and air intake corrected. This screw is found on the motor. Mine was a gold color. And has a flat head shape.
@@ad7321 thanks so much! I will give it a try
Mines is also having same problem it starts runs for 20seconds then cuts out